VP228-serien LCD-skärm Användarhandbok
Innehållsförteckning Meddelanden................................................................................................ iv Säkerhetsinformation................................................................................... v Underhåll och rengöring............................................................................ vii 1.1 Välkommen!................................................................................... 1-1 1.2 Förpackningens innehåll......................................
A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice.
Meddelanden Meddelande från Federal Communications Commission Denna enhet uppfyller del 15 av FCC-reglerna. Användning får ske under följande två villkor: • Enheten får inte orsaka skadliga störingar och • Denna enhet måste acceptera alla mottagna störningar, inklusive störningar som kan orsaka oönskade funktioner. Denna utrustning har testats och befunnits överensstämma med gränserna för en digital enhet av Klass B, enligt del 15 av FCC-reglerna.
Säkerhetsinformation • Innan skärmen installeras läs noga igenom all dokumentation som medföljde förpackningen. • Förebygg brand eller elstötar genom att inte utsätta skärmen för regn eller väta. • Försök inte att öppna skärmhöljet. De farliga spänningarna inuti skärmen kan orsaka allvarliga personskador. • Om strömförsörjningen är trasig, försök inte att reparera den själv. Kontakta en behörig servicetekniker eller din återförsäljare.
VARNING! Användning av andra hörlurar än vad som anges kan leda till hörselskador på grund av för högt ljudtryck.
Underhåll och rengöring • Innan du lyfter eller flyttar på skärmen är det bäst att först koppla ifrån kablar och nätsladd. Använd korrekt lyftteknik vid placering av skärmen. När du lyfter eller bör skärmen, håll i dess kanter. Lyft inte skärmen via stativet eller kabeln. • Rengöring. Stäng av projektorn och dra ur nätsladden. Rengör skärmytan med en dammfri, mjuk trasa. Svåra fläckar kan tas bort med en tygduk som är fuktad med ett milt rengöringsmedel.
Vart man hittar mer information Se följande källor för ytterligare information och för produkt- och programuppdateringar. 1. ASUS webbplatser ASUS webbplatser ger uppdaterad information över hela världen för ASUS hårdvaru- och programprodukter. Se http://www.asus.com 2. Ytterligare dokumentation Produktförpackningen kan innehålla ytterligare dokumentation som lagts till av din återförsäljare. Dessa dokument är inte en del av den vanliga förpackningen.
1.1 Välkommen! Tack för att du köpt ASUS® LCD-skärm! Den senaste LCD-skärmen från ASUS ger en tydligare, bredare och ljusstarkare bild tillsammans med en mängd egenskaper som förbättrar din visningsupplevelse. Med dessa egenskaper kan du njuta av den praktiska och njutbara visuella upplevelsen som skärmen ger dig! 1.
1.3 Sätta ihop bildskärmen För att sätta ihop bildskärmen: 1. Placera skärmen plant på en duk på bordet. Sätt fast foten på stativet och skruva fast med skruven så att de sitter tätt ihop. Det är lätt att dra åt skruven med fingrarna. 2. Justera skärmen till den vinkel som känns mest bekväm.
1.4 Kabelanslutning 1.4.1 LCD-skärmens baksida 7 HDMI 1 2 DVI VGA 3 4 HDMI 1 6 2 2 5 VGA VP228HE 4 5 VP228T VP228TE VGA 3 4 DVI 1 VP228QG 4 DVI 1 5 VGA HDMI 1 VP228H 3 5 VGA 4 VGA 1 1. Växelströmsingång 2. HDMI-port 3. DVI-port 4. VGA-port 5. Ljudingångsport 6. DisplayPort 7.
Installation 1. Stäng av din dator och dra ur din dators strömsladd. 2. Anslut signalkabeln till HDMI (tillval) och/eller VGA (tillval) och/eller DVI (tillval) och/eller DP (tillval) till skärmen och till HDMI (tillval) och/eller VGA (tillval) och/eller DVI (tillval) och/eller DP (tillval) till utgången på datorns grafikkort. Dra sedan åt tumskruvarna på signalkabelkontakten. 3. Valfritt: Anslut ljudingångsuttaget (LJUD IN) på LCD-skärmen till linje ut-porten på datorn med ljudkabeln. 4.
• STRÖMSLADD-specifikationer, se sida v. • För installation av reservdelar ber vi dig se ovan installationsinstruktioner. • Användare kan gå till det lokala servicenätverket för att byta ut/köpa kvalificerade reservdelar. • Lokala servicecentrer och servicekontakter finns på https://www.asus.
1.5 Introduktion till skärmen 1.5.1 Använda kontrollknapparna Använd kontrollknapparna på baksidan av bildskärmen för att justera bildinställningar. VP228H/VP228HE/VP228QG 7 6 5 4 3 2 1 VP228T/VP228TE/VP228N/VP228NE /VP228DE Auto 8 1. Strömindikator: • 2. Status Beskrivning Vit PÅ Gul Standbyläge AV AV Power (Ström)-knapp: • 1-6 Färgdefinitionerna för strömindikatorlampan anges i tabellen nedan. Tryck på den här knappen för att sätta på eller stänga av bildskärmen.
3. MENU (Meny)-knapp: • Tryck på den här knappen för att öppna OSD-menyn (bildskärmsmenyn). • Avsluta OSD-menyn. 4. Close (Stäng)-knapp: 5. Knapp för Input Select (Inmatningsval): • 6. Snabbknapp 1 • 7. Det här är en snabbknapp. Standardinställningen är Brightness (Ljusstyrka). Snabbknapp 2 • 8. Använd det här snabbkommandot för att växla från VGA, DVI, HDMI (endast VP228H / VP228HE / VP228QG), DisplayPort (endast för VP228QG) ingångssignal. Det här är en snabbknapp.
2.1 Ta bort armen/stativet (för VESAväggmontering) Den avskiljbara ställningen för denna skärm är speciellt konstruerad för VESA väggmontering. Ta bort armen/stället 1. Koppla ifrån nätsladd och signalkablar. Placera försiktigt bildskärmen med framsidan nedåt på ett rent bord. 2. Använd fingrarna för att lossa skruven som finns längst ner på basen och ta bort basen från ställningen. Ta sedan bort gångjärnslocket från bildskärmens kropp med hjälp av fingrarna. 3.
2.2 Justera bildskärmen • För optimal visning rekommenderar vi att du tittar på hela skärmytan och sedan justerar vinkeln till den vinkel du finner bekvämast. • Håll i foten för att förhindra att skärmen faller när du ändrar vinkeln. • Bildskärmens vinkel kan justeras från +20˚ till -5˚. -5 ~ 20 Det är normalt att skärmen skakar lätt medan du ändrar betraktningsvinkeln.
3.1 Skärmmeny (OSD) 3.1.1 Hur man konfigurerar om Splendid ASUS VP228 Standard Mode VGA 1920x1080@60Hz Scenery Mode Standard Mode Theater Mode Game Mode Night View Mode sRGB Mode Reading Mode Darkroom Mode 1. Tryck på knappen MENU (Meny) för att aktivera OSD-menyn. 2. Tryck på knapparna och för att växla mellan alternativen i menyn. När du flyttar från en ikon till en annan markeras alternativets namn. 3. Tryck på knappen 4. Tryck på knapparna och för att välja en parameter. 5.
3.1.2 1. Introduktion för funktioner i skärmmenyn Splendid Den här funktionen har åtta underfunktioner som du kan välja mellan beroende på dina preferenser. Varje läge har en Reset-funktion (återställningsfunktion) så att du kan behålla dina inställningar eller återgå till det förinställda läget.
2. Blue Light Filter (Filter för blått ljus) Justera energinivån för blått ljus som avges från LEDbakgrundsbelysning. Blue Light Filter ASUS VP228 Standard Mode VGA 1920x1080@60Hz Level 0 Level 1 Level 2 Level 3 Level 4 • Level 0 (Nivå 0): Ingen förändring. • Level 1~4 (Nivå 1~4): Ju högre nivå desto mindre blått ljus. • När Blue Light Filter (Filter för blått ljus) aktiveras kommer standardinställningarna för Standard Mode (Standardläge) att importeras automatiskt.
3. Color (Färg) Välj den bildfärg som du gillar i denna funktion. Color ASUS VP228 Standard Mode VGA 1920x1080@60Hz Brightness Contrast Saturation Color Temp. Skin Tone Smart View • Brightness (Ljusstyrka): Justeringsintervallet är från 0 till 100. • Contrast (Kontrast): Justeringsintervallet är från 0 till 100. • Saturation (Mättnad): Justeringsintervallet är från 0 till 100. • Color Temp.
4. Image (Bild) Du kan justera bildens Sharpness (Skärpa), Trace Free (endast VP228H / VP228HE / VP228T / VP228TE / VP228N / VP228NE), Aspect Control (Bildförhållandekontroll), VividPixel, ASCR, AdaptiveSync/Freesync (endast VP228QG), Position (endast VGA), Focus (Fokus) (endast VGA) och Auto Adjust (Automatisk justering) (endast VGA), från denna huvudfunktion.
5. • 4:3 är endast tillgänglig när ingångskällan är i 4:3-format. OverScan är endast tillgängligt för HDMI-inmatning • Phase (Fas) justerar fasen för pixelklocksignalen. Med en felinställd fasjustering kommer skärmen att visas med horisontella störningar. • Clock (Klocka) (pixelfrekvens) styr antalet pixlar som skannas av ett horisontellt svep. Om frekvensen inte är korrekt kommer vertikala ränder att visas på skärmen och bilden är inte proportionell.
6. Input Select (Ingångsval) Välj ingångskälla från VGA, DVI (endast VP228H / VP228T / VP228TE / VP228N / VP228NE), HDMI (VP228H / VP228HE / VP228QG), DisplayPort (VP228QG) ingångssignal. Input Select ASUS VP228 Standard Mode VGA 1920x1080@60Hz VGA DVI HDMI DisplayPort 7. System Setup (Systeminställning) Justerar systemkonfigurationen.
ASUS VP228 Standard Mode VGA 1920x1080@60Hz System Setup Back Information Power Indicator Power Key Lock All Reset • Splendid Demo Mode (Splendid demoläge): Aktrivera demoläget för Splendid-funktionen. • Volume (Volym): Justerar utgångsvolymen. (endast VP228H / VP228HE / VP228T / VP228TE). • GamePlus: GamePlus-funktionen erbjuder ett verktyg och skapar en bättre spelmiljö när du spelar olika typer av spel.
• QuickFit: Innehåller tre mönster: (1) Rutmönster, (2) Fotostorlek. 1. Rutnätsmönster: Underlättar för designers och användare att organisera innehåll och layouter på en sida och uppnå ett konsekvent utseende och känsla. Alignment Grid 1 2. Alignment Grid 2 Fotostorlek: Möjliggör för fotografer och andra användare att korrekt visa och redigera deras bilder i verklig storlek på skärmen. 4x6 3x5 2x2 • ECO Mode: Aktivera eco-läget för att spara energi.
8. Shortcut (Snabbknapp) Om du väljer det här alternativet kan du ställa in två kortkommandon. ASUS VP228 Standard Mode VGA 1920x1080@60Hz Shortcut Shortcut 1 Blue Light Filter Shortcut 2 Brightness Splendid Auto Adjust Contrast Color Temp.
3.2 Specifikationer Modell VP228QG VP228H Panelstorlek VP228T 21,5” B (54,6 cm) Högsta upplösning 1920x1080 Ljusstyrka (typ.) 250 cd/m2 Inbäddat kontrastförhållande (typ.
Modell VP228TE VP228NE Panelstorlek 21,5” B (54,6 cm) Högsta upplösning 1920x1080 Ljusstyrka (typ.) 200 cd/m2 Inbäddat kontrastförhållande (typ.) 600:1 Betraktningsvinkel (CR>10) 90°(H) /65°(V) Skärmfärger 16,7 M (6 bit+FRC) Svarstid Satellithögtalare 1 ms Nej Nej HDMI-ingång Nej DVI-inmatning Ja D-Sub-ingång Strömförbrukning PÅ Obs! Chassifärg Energisparläge Avstängningsläge Lutning VESA väggmontering Nej Ja Ja Nej < 16 W* *Baserat på Energy Star-standarden 7.
Modell Panelstorlek VP228HE 21,5” B (54,6 cm) Högsta upplösning 1920x1080 Ljusstyrka (typ.) 200 cd/m2 Inbäddat kontrastförhållande (typ.) Betraktningsvinkel (CR>10) Skärmfärger Svarstid 600:1 90°(H) /65°(V) 16,7 M (6 bit+FRC) 1 ms Satellithögtalare 1,5W x 2 stereo Ljud från HDMI Ja HDMI-ingång Ja DVI-inmatning Nej D-Sub-ingång Ja Ljudlinjeingång Ja Strömförbrukning PÅ Obs! Chassifärg < 16 W* *Baserat på Energy Star-standarden 7.
3.3 Felsökning (FAQ) Problem Möjlig lösning Strömindikatorn är inte PÅ • Tryck på -knappen för att kontrollera om skärmen är PÅ. • Kontrollera att strömkabeln är korrekt ansluten till skärmen och eluttaget. • Kontrollera strömindikator-funktionen i OSDhuvudmenyn. Välj "ON (PÅ)" för att slå på strömindikatorn. Strömindikatorn lyser gult och ingen bild syns • Kontrollera att skärmen och datorn är PÅ. • Se till att signalkabeln är korrekt ansluten till skärmen och datorn.
3.
SD/HD-timings (endast HDMI-ingång) HDMI 1.3, CEA-861B-format, SD/HD stöd för primära timings (endast HDMIingång) Upplösning Uppdateringsintervall Horisontell frekvens 640x480P 720x480P 720x576P 1280x720P 1280x720P 1920x1080i 1920x1080i 59,94 / 60Hz 59,94 / 60Hz 50Hz 50Hz 59,94 / 60Hz 50Hz 59,94 / 60Hz 31,469 / 31,5kHz 31,469 / 31,5kHz 31,25kHz 37,5kHz 44,955 /45kHz 28,125kHz 33,716 / 33,75kHz HDMI 1.