User Guide

2-1ASUS VA229Q/ VP229Q/ VP229HE Series LCD Monitor
2.1 Assembling the monitor arm/base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Place the arm hinge of the stand assembly onto its compartment on the rear
of the monitor (for selected models).
3. Attach the base into the arm, making sure the tab on the arm ts into the
groove on the base.
4. VP229Q/ VP229HE: Fix the base to the arm by rotating the base until it ts
into place.
VA229QSB: Fix the base to the arm by fastening the bundled screw.
5. VA229QSB: Remove the stop screw at the bottom of the base to allow 180˚
swiwel adjustment from either left or right.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
VA229QSB
VP229Q/VP229HE
180°
1
2
1
2
1
2
1
2 3
(
For selected models
)
(
For selected models
)
For VP229Q/VP229HE: Hinge screw size: M4 x 10 mm.
For VA229QSB: Hinge screw size: M4 x 12 mm.
Base screw size: M6 x 16.5 mm.