User Guide

2-1

ASUS LCD Monitor VP2

Series

2.1 Detaching the arm/stand (for VESA wall

mount)

The detachable stand of this monitor is specially designed for VESA wall

mount.

To detach the arm/stand

1. Disconnect power and signal cables. Carefully put the front of the

monitor face down on a clean table.

2. Useyourngerstoloosenthescrewlocatedatthebottomofthe

base,and remove the base from the stand.And then remove the hinge

coverfrommonitorbodybyusingyourngers.

3. Use a screwdriver to remove the two screw on the arm (Figure 1),and

then detach the arm/stand from the monitor.

• We recommend that you cover the table surface with soft cloth to prevent

damage to the monitor.

• Hold the stand of the monitor while removing the screws.

• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.

• Use only the UL Listed Wall Mount Bracket with minimum weight/load 12 kg

(Screw size: M4 x 10 mm).