Seria VP249 Monitor LCD Ghid de utilizare
Prima ediție Aprilie 2017 Copyright © 2017 ASUSTeK COMPUTER INC. Toate drepturile rezervate. Nicio parte din acest manual, inclusiv produsele și software-ul descrise în el, nu poate fi reprodusă, transmisă, transcrisă, stocată într-un sistem de recuperare sau tradusă în vreo limbă, în niciun format și prin niciun mijloc, cu excepția documentației păstrate de cumpărător drept copie de rezervă, fără permisiunea expresă în scris din partea ASUSTeK COMPUTER INC. („ASUS”).
Cuprins Notices.......................................................................................................... iv Informații referitoare la siguranță.............................................................. vi Îngrijire și curățare.................................................................................... viii Servicii de preluare...................................................................................... ix 1.1 Bine ați venit!.............................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Informații TCO Felicitări! Acest produs are certificatul TCO Certified — pentru un mediu IT sustenabil TCO Certified este o certificare terță internațională privind sustenabilitatea produselor IT. TCO Certified vă asigură că fabricarea, utilizarea și reciclarea produselor IT reflectă responsabilitatea socială, economică și ecologică. Fiecare model de produs TCO Certified este verificat de un laborator independent de încercări acreditat.
Puteți descărca un set de criterii detaliat la adresa www.tcodevelopment.com, unde puteți găsi și o bază de date cu caracteristică de căutare, care conține toate produsele IT cu certificarea TCO Certified. Timp de 20 de ani, TCO Development, organizația din spatele certificării TCO Certified, a fost un pionier internațional în domeniul tehnologiilor durabile. Criteriile certificării TCO Certified sunt elaborate în colaborare cu oameni de știință, experți, utilizatori și producători.
• Evitați praful, umiditatea și temperaturile extreme. Nu plasați monitorul într-o zonă în care s-ar putea umezi. Plasați monitorul pe o suprafață stabilă. • Deconectați unitatea în cursul unei furtuni sau atunci când nu va mai fi folosită pentru o perioadă îndelungată. Astfel veți proteja monitorul de defecțiuni provocate de vârfuri de tensiune. • Nu introduceți obiecte și nu vărsați niciodată lichide în fantele din carcasa monitorului.
Îngrijire și curățare • Înainte de a ridica sau a repoziționa monitorul, vă recomandăm să deconectați cablurile și cordonul de alimentare. Respectați tehnicile corecte de ridicare atunci când poziționați monitorul. Atunci când ridicați sau transportați monitorul, țineți-l de margini. Nu ridicați afișajul ținând de picior sau de cordon. • Curățare. Opriți monitorul și deconectați cordonul de alimentare. Curățați suprafața monitorului cu o cârpă neabrazivă și fără scame.
Unde să găsiți mai multe informații Consultați următoarele surse pentru informații suplimentare și pentru actualizări de produse și software. 1. Site-uri web ASUS Site-urile web ASUS din întreaga lume furnizează informații actualizate despre produsele hardware și software ASUS. Consultați http://www.asus.com 2. Documentație facultativă Pachetul dvs. de produs poate include documentație facultativă care să fi fost adăugată de către distribuitor. Aceste documente nu fac parte din pachetul standard.
1.1 Bine ați venit! Vă mulțumim pentru că ați achiziționat un monitor ASUS® LCD! Cel mai recent monitor LCD widescreen de la ASUS oferă un afișak mai clar, mai larg și mai luminos, plus o serie de funcții care îmbunătățesc experiența de vizualizare. Cu aceste funcții vă puteți bucura de convenabilitate și de o experiență vizuală incredibilă oferite de monitor! 1.
1.3 Asamblarea bazei monitorului 1. Plasați monitorul cu fața în jos pe o masă. 2. Atașați baza la braț. 3. Înșurubați în sensul acelor de ceasornic pentru a asigura baza. Apoi reglați monitorul pentru ca unghiul de vizualizare să fie cel mai confortabil pentru dvs. •• 1-2 Vă recomandăm să acoperiți suprafața mesei cu o cârpă moale, pentru a nu deteriora monitorul.
1.4 Conectați cablurile 1.4.1 Spatele monitorului LCD DV I 1 HDMI VG A 3 1 4 DVI VGA 6 7 2 3 4 5 7 8 VP249H HDMI 2 3 2 VGA HDMI VP249N 1 VGA VGA 2 4 VGA HDMI 5 9 7 8 VP249Q 1. Buton de control 6. Port DVI 2. Difuzoare 7. Port VGA 3. Port intrare c.a. 8. Port intrare audio 4. Încuietoare Kensington 9. DisplayPort 5.
1.5 Prezentare generală a monitorului 1.5.1 Utilizarea butoanelor de control Folosiți butoanele de control din spatele monitorului pentru a ajusta setările imaginii. Atingeți tastele de la 1 la 6 pentru a activa pagina care prezintă lista de taste. Auto 1 1 2 Meniu Meniu Închidere Închidere Input Select AUTO reglare Selectare introducere QuickFit QuickFit GamePlus Strălucire Strălucire Filtru Lumină Albastră Filtru Lumină Albastră 2 3 3 4 5 4 5 6 6 1 7 VP249N 1.
4. Buton AUTO reglare (numai pentru modelul VP249N): Execută automat AUTO reglarea (opțiune disponibilă numai pentru intrarea VGA). Buton Introducere (numai pentru modelul VP249H/VP249Q): Comută sursa de intrare. 5. Buton Închidere: • 6. Părăsește meniul OSD. Buton Meniu: • 7. Intră în meniul OSD. Buton/Indicator de alimentare: • Apăsați pe acest buton pentru a porni sau a opri monitorul. • Culoarea indicatorului de alimentare este definită în tabelul de mai jos.
1.5.2 Funcția QuickFit Funcția QuickFit conține trei modele: (1) Grilă (2) Dimensiune hârtie (3) Dimensiune fotografie. Funcția QuickFit conține trei modele: 1. Model grilă: Simplifică pentru designeri și utilizatori organizarea conținutul și a aspectului într-o pagină și obținerea unui aspect consecvent. Alignment Grid 2. Dimensiune hârtie: Permite utilizatorilor vizualizarea documentelor pe ecran la dimensiunea lor reală. B5 Scrisoare B5 Letter EXIT 3.
2.1 Detașarea bazei (în cazul suportului de montare pe perete VESA) Procedați astfel pentru a detașa baza 1. Deconectați cablurile de alimentare și de semnal. Cu atenție, așezați monitorul cu fața în jos pe o masă curată. 2. Rotiți în sens antiorar pentru a slăbi șurubul situat în partea de jos a bazei. 3. Scoateți baza de pe suport. 4. Scoateți capacul suportului. Apoi scoateți cele 4 urechi de cauciuc din găurile pentru șuruburile de montare pe perete. 5.
2.2 Ajustarea monitorului • Pentru vizualizare optimă, vă recomandăm să priviți din față monitorul, apoi să-l reglați în unghiul cel mai potrivit pentru dvs. • Țineți monitorul de bază pentru ca acesta să nu cadă atunci când îi modificați unghiul. • Puteți ajusta unghiul de vizualizare pentru monitor între -5˚ și 22˚. -5˚ și to +22˚ +22˚ •• Fluctuațiile ușoare ale monitorului atunci când îi reglați unghiul de vizualizare sunt normale.
3.1 Meniul OSD (meniul afișat pe ecran) 3.1.1 Cum se reconfigurează VP249 Splendid Mod standard VGA 1920 x 1080 @ 60Hz Mod peisaj Mod standard Mod teatru Mod joc Mod nocturn Mod sRGB Mod Citire Mod Întunecat 3-1 1. Apăsați pe butonul MENU pentru a activa meniul OSD. 2. Apăsați pe butoanele și pentru a comuta între diferitele opțiuni din Meniu. Pe măsură ce vă deplasați de la o pictogramă la alta, numele opțiunii este evidențiat. 3.
3.1.2 1. Introducere în funcționarea meniului OSD Splendid Această funcție conține opt subfuncții prin care puteți să vă alegeți opțiunile de vizualizare preferate. Fiecare mod dispune de o selecție Resetare, care vă permite să păstrați setarea curentă sau să reveniți la modul presetat.
• • • 2. În Modul standard, funcțiile Saturație, Ton strat, Claritate și ASCR nu sunt configurabile de către utilizator. În Modul sRGB, funcțiile Saturație, Culoare temperatură, Ton strat, Claritate, Strălucire, Contrast și ASCR nu sunt configurabile de către utilizator. În Modul Citire, funcțiile Saturație, Ton strat, ASCR, Contrat și Culoare temperatură nu sunt configurabile de către utilizator. Filtru Lumină Albastră Cu această funcție puteți regla nivelul filtrului pentru lumina albastră.
3. Culoare Selectați în această funcție culoare imaginii pe care o doriți. Culoare VP249 Mod standard VGA 1920 x 1080 @ 60Hz Strălucire Contrast Saturație Culoare temperatură Ton strat • Strălucire: Ajustați nivelul de strălucire. Intervalul de ajustare variază de la 0 la 100. • Contrast: Ajustați nivelul de contrast. Intervalul de ajustare variază de la 0 la 100. • Saturație: Ajustați nivelul de saturație. Intervalul de ajustare variază de la 0 la 100.
4. Imagine Folosind această funcție poți regla următoare setări pentru imagine: Claritate, Control aspect, VividPixel, ASCR, Poziție, Focalizare și AUTO reglare Imagine VP249 Mod standard VGA 1920 x 1080 @ 60Hz Claritate Trace Free Control aspect VividPixel ASCR Poziție Focalizare AUTO reglare • Claritate: Ajustați claritatea imaginii. Intervalul de ajustare variază de la 0 la 100. • Trace Free: Accelerează timpii de răspuns folosind tehnologia Over Drive.
5. Selectare introducere Selectați sursa de intrare.
VP249Q Selectare introducere VP249 Mod standard VGA 1920 x 1080 @ 60Hz VGA HDMI DisplayPort 3-7 Capitolul 3: Instrucțiuni generale
6. Configurare sistem Ajustați configurația sistemului. VP249N VP249 Configurare sistem Mod standard VGA 1920 x 1080 @ 60Hz Splendid Demo Mode GamePlus ECO Mode Configurare OSD Limbă Blocare taste Informații Mai mult (Pagina 1/2) VP249 Configurare sistem Mod standard VGA 1920 x 1080 @ 60Hz Înapoi Indicator alimentare Bloc. cu tasta de alim.
VP249H / VP249Q VP249 Configurare sistem Mod standard VGA 1920 x 1080 @ 60Hz Splendid Demo Mode Volum GamePlus ECO Mode Configurare OSD Limbă Blocare taste Mai mult (Pagina 1/2) VP249 Configurare sistem Mod standard VGA 1920 x 1080 @ 60Hz Înapoi Informații Indicator alimentare Bloc. cu tasta de alim. Resetare totală (Pagina 2/2) 3-9 • Splendid Demo Mode: Activați modul demonstrativ pentru funcția Splendid. • Volum (numai pentru modelele VP249H/VP249Q): Ajustați nivelul de volum.
7. • Configurare OSD: Ajustați valorile Pauză OSD, DDC/CI și Transparență pentru ecranul OSD. • Limbă: Selectați limba OSD. • Blocare taste: Apăsați pe al doilea buton din dreapta timp de mai mult de cinci secunde pentru a activa funcția de blocare a tastelor. • Informații: Afișați informații despre monitor. • Mai mult: Reveniți la pagina următoare din Setare sistem. • Înapoi: Reveniți la pagina precedentă din Setare sistem.
VP249 Scurtătură Mod standard VGA 1920 x 1080 @ 60Hz Scurtătură 1 Filtru Lumină Albastră Scurtătură 2 Splendid Strălucire AUTO reglare Contrast Culoare temperatură GamePlus (Scurtătură 2) VP249H / VP249Q VP249 Scurtătură Mod standard VGA 1920 x 1080 @ 60Hz Scurtătură 1 Filtru Lumină Albastră Scurtătură 2 Splendid Strălucire AUTO reglare Contrast Culoare temperatură Volum GamePlus (Scurtătură 1) 3-11 Capitolul 3: Instrucțiuni generale
VP249 Scurtătură Mod standard VGA 1920 x 1080 @ 60Hz Scurtătură 1 Filtru Lumină Albastră Scurtătură 2 Splendid Strălucire AUTO reglare Contrast Culoare temperatură Volum GamePlus (Scurtătură 2) • • Scurtătură 1: Atribuie o funcție pentru Tasta scurtătură 1. Opțiuni disponibile: Filtru Lumină Albastră, Splendid, Strălucire, AUTO reglare, Contrast, Culoare temperatură, Volum (numai pentru modelele VP249H /VP249Q) și GamePlus. Setarea implicită este Strălucire.
3.1.2.1 Funcție GamePlus Funcția GamePlus oferă un set de instrumente și creează un mediu mai bun pentru gaming utilizatorilor în diferite tipuri de jocuri. Suprapunerea folosind funcția Punct ochit cu patru opțiuni diferite vă permite să alegeți varianta care se potrivește cel mai bine pentru jocul dvs. Temporizatorul de pe ecran poate fi poziționat în stânga afișajului, pentru a ține evidența timpului petrecut în joc. Pentru a activa GamePlus: 1. 2. 3. 4. 5. 6. 7. 8.
3.2 Specificații Model VP249N VP249H VP249Q Dimensiune panou Diagonală de 23,8 inchi (60,5 cm) (Suprafață afișare activă: 527,04 (Î) x 296,46 (V) mm) Rezoluție max.
3.3 Identificarea erorilor (întrebări frecvente) Problemă LED-ul de alimentare nu este PORNIT Posibilă soluție • Apăsați pe butonul pentru a verifica dacă monitorul este pornit. • Verificați dacă ați conectat corect cablul de alimentare la monitor și la priză. • Verificați funcția Indicator alimentare din meniul OSD. Selectați „PORNIT” pentru a porni LED-ul de alimentare. LED-ul de alimentare se aprinde, • Verificați dacă monitorul și computerul sunt are culoarea galbenă, dar nu pornite.
3.