VZ249 sorozat LCD-monitor Felhasználói útmutató
Első kiadás 2017. áprilisa Szerzői jog © 2017 ASUSTeK COMPUTER INC. Minden jog fenntartva! Az ASUSTeK COMPUTER INC. („ASUS”) előzetes írásos engedélye nélkül ennek a kiadványnak, illetve a benne leírt termékeknek vagy szoftvernek, semmilyen részletét nem szabad sokszorosítani, továbbítani, átírni, adatfeldolgozó rendszerben tárolni, bármilyen nyelvre lefordítani, legyen az bármilyen formában vagy eszközzel, kivéve a vásárlói dokumentációt tartalékmásolat készítése céljából. (“ASUS”).
Tartalomjegyzék Notices.......................................................................................................... iv Biztonsági információ................................................................................. vi Gondozás és tisztítás................................................................................ viii Visszavételi szolgáltatások......................................................................... ix 1.1 Üdvözöljük!..............................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
TCO információ Gratulálunk! Ez a termék TCO Certified hitelesítéssel rendelkezik – a fenntartható IT tekintetében A TCO Certified hitelesítés nemzetközi, harmadik fél általi fenntarthatósági hitelesítés IT termékek számára A TCO Certified biztosítja azt, hogy az IT termékek gyártása, használata és újrahasznosítása a környezetvédelmi, társadalmi és gazdasági felelősségvállalás tekintetében történjen. Minden TCO Certified terméket akkreditált, független bevizsgáló laboratórium ellenőriz.
A TCO Development, a TCO Certified mögött álló szervezet, már 20 éve a fenntartható IT nemzetközi mozgatórugója. A TCO Certified kritériumait tudósokkal, szakértőkkel, felhasználókkal és gyártókkal együttműködésben fejlesztették ki. A szervezetek a világ minden részén a TCO Certifiedra támaszkodnak mint eszköz a fenntartható informatikai céljaik elérésében. Tulajdonosunk a TCO, egy, az irodai dolgozókat képviselő non-profit szervezet.
• A megfelelő működés érdekében a monitort kizárólag UL-minősítéssel rendelkező számítógéppel használja, amely megfelelően konfigurált aljzatokkal rendelkezik és 100 - 240 V~ jelzéssel van ellátva. • A konnektor a berendezés közelében és könnyen elérhető legyen. • Ha olyan problémát tapasztal a monitorral kapcsolatban, amelyet nem tud megoldani, kérjük lépjen kapcsolatba szerviz szakemberrel vagy a kiskereskedővel.
Gondozás és tisztítás • Mielőtt felemelné vagy áthelyezné a monitort, tanácsos leválasztani róla a tápkábelt és a jelkábeleket. Alkalmazza a megfelelő emelési technikát a monitor elhelyezésénél. A monitor emelése vagy hordozása alkalmával mindig a szélénél fogja meg. Ne emelje meg a monitort a talpánál vagy a tápkábelnél fogva. • Tisztítás. Kapcsolja ki a monitort és húzza ki a hálózati tápkábelt. A monitort nem szöszölő, puha kendővel tisztítsa.
Hol tájékozódhatom részletesebben? További információkért, illetve termék- vagy szoftverfrissítésekért vegye igénybe az alábbi forrásokat: 1. ASUS weboldalak Az ASUS nemzetközi weboldalai a legfrissebb információkat közlik az ASUS hardver- és szoftvertermékeivel kapcsolatban. Látogassa meg a http://www.asus.com weboldalt. 2. Opcionális dokumentáció A termék csomagja opcionális dokumentációt is tartalmazhat, amelyet a kereskedő biztosított. Ezek a dokumentumok nem részei a szabvány csomagnak.
1.1 Üdvözöljük! Köszönjük, hogy ASUS® LCD-monitort választott! Az ASUS legújabb szélesképernyős LCD monitorja élesebb, szélesebb és világosabb képet biztosít, valamint számos szolgáltatást, amelyek fokozzák élményét. A szolgáltatások élvezetessé és praktikussá teszik a monitor nyújtotta vizuális élményt! 1.
1.3 A monitortalp összeszerelése 1. Helyezze a monitort a panellel lefelé egy sima felületre, pl. asztalra. 2. Illessze a talpat a karhoz. 3. Forgassa a csavart az óramutató járásával megegyező irányba a talp rögzítéséhez. Ezután állítsa a monitort kényelmes szögbe. •• 1-2 Tanácsos az asztal felületét puha kendővel leteríteni, nehogy megsérüljön a monitor. 1.
1.4 Kábelek csatlakoztatása 1.4.1 Az LCD-monitor hátulnézete DV I 1 HDMI VG A 3 1 4 DVI VGA 6 7 2 3 4 5 7 8 VGA 2 4 VGA HDMI 5 2 VGA VP249H HDMI 1 2 3 HDMI VP249N VGA 9 7 8 VP249Q 1. Vezérlőgomb 6. DVI-csatlakozó 2. Hangszórók 7. VGA-csatlakozó 3. AC tápcsatlakozó 8. Audió bemeneti csatlakozó 4. Kensington típusú zár 9. DisplayPort 5.
1.5 A monitor bemutatása 1.5.1 A vezérlőgomb használata Használja a monitor hátulján lévő vezérlőgombot a képbeállítások elvégzéséhez. Érintse meg az 1-6. gombot a gomblista oldal megnyitásához. Auto 1 1 2 Menü Menü Bezárás Bezárás Input Select AUTO. Beállítás Bemenetválasztás QuickFit QuickFit GamePlus Fényerő Fényerő Kék Fényszűrő Kék Fényszűrő 2 3 3 4 5 4 5 6 6 VP249N 1. 7 1 2 2 3 3 4 5 4 5 6 6 7 VP249H & VP249Q Parancsikon2: • 2. Ez egy gyorsgomb.
4. AUTO. Beállítás gomb (csak VP249N típus esetén): Az Auto. beállítás automatikus végrehajtása (csak VGA-bemenet esetén érhető el). Bemenet gomb (csak a VP249H / VP249Q típusok esetén): A bemeneti videó jelforrás váltása. 5. Bezárás gomb: • 6. Kilépés az OSD menüből. Menü gomb: • 7. Belépés az OSD menübe. Üzemkapcsoló/Működésjelző: • Nyomja meg a gombot a monitor be-/kikapcsolásához. • Az alábbi táblázat tartalmazza a bekapcsolt állapotot jelző fény színeinek meghatározását.
1.5.2 QuickFit funkció A QuickFit funkció három mintát tartalmaz: (1) Rács (2) Papírméret (3) Fotóméret. A QuickFit három mintázattal rendelkezik: 1. Rácsminta: Lehetővé teszi a tervezők és felhasználók számára, hogy a tartalmat és képelrendezést megszervezzék az oldalon és egységes megjelenést és hatást biztosítsanak. Alignment Grid 2. Papírméret: A segítségével a felhasználók valós méretben megtekinthetik dokumentumaikat a képernyőn. B5 Letter B5 Letter EXIT 3.
2.1 A talp leszerelése (VESA fali konzolhoz) A talp leszereléséhez tegye a következőket: 1. Válassza le a táp- és jelkábeleket. Óvatosan helyezze a monitort a panellel lefelé egy tiszta felületre, pl. asztalra. 2. Lazítsa meg a talp alján lévő csavart az óramutató járásával ellenkező irányban. 3. Távolítsa el a talpat az állványról. 4. Távolítsa el az állvány fedelét. Ezután távolítsa el a gumidugókat a fali konzol 4 csavarlyukának belsejéből. 5.
2.2 A monitor beállítása • Az optimális nézőszög beállításához tanácsos szemből néznie a monitort, majd a lehető legkényelmesebb állásra beállítania a monitor szögét. • Fogja meg a talpat, nehogy leessen a monitor, amikor beállítja a szögét. • A monitor nézőszögét -5˚ és 22˚ között állíthatja be. -5˚ és +22˚ to +22˚ •• A nézőszög beállítása közben normális, ha a monitor kissé rázkódik.
3.1 OSD (képernyőn megjelenő) menü 3.1.1 Útmutató a beállításhoz VP249 Splendid Normál mód VGA 1920 x 1080 @ 60Hz Tájkép mód Normál mód Színház mód Játék mód Éjszakai mód sRGB mód Olvasási Mód Sötét Szoba Mód 3-1 1. Nyomja meg a MENU gombot, hogy aktiválja az OSD menüt. 2. Nyomja meg a és gombot a menülehetőségek váltásához. Ahogy az ikonok között lépked, a lehetőség neve kiemelésre kerül. 3. Nyomja meg a gombot a menü kiemelt elemének kiválasztásához. 4. Nyomja meg a és 5.
3.1.2 1. Az OSD funkciók bemutatása Splendid Ez a funkció nyolc alfunkciót tartalmaz, amelyeket tetszés szerint kiválaszthat. Mindegyik üzemmód alaphelyzet funkcióval rendelkezik, ami lehetővé teszi saját beállításának megtartását, illetve az alapértelmezett módba történő visszalépést.
• • • 2. Normál módban a Telítettség, Bőrtónus, Élesség és ASCR funkciók nem állíthatók be a felhasználó által. sRGB módban a Telítettség, Színhőmérs., Bőrtónus, Élesség, Fényerő, Kontraszt és ASCR funkciók nem állíthatók be a felhasználó által. Olvasás módban a Színtelítettség, Bőrtónus, ASCR, Kontrasz és Színhőmérséklet funkciók nem állíthatók be a felhasználó által. Kék fényszűrő Itt a kékfény szűrési szintet szabályozhatja. Kék Fényszűrő VP249 Normál mód VGA 1920 x 1080 @ 60Hz 0. szint 1. szint 2.
3. Szín Válassza ki az Önnek legjobban tetsző színezetet. Szín VP249 Normál mód VGA 1920 x 1080 @ 60Hz Fényerő Kontraszt Telítettség Színhőmérs. Bőrtónu • Fényerő: Fényerő beállítása. A beállítási tartomány 0-tól 100-ig terjed. • Kontraszt: Kontraszt beállítása. A beállítási tartomány 0-tól 100ig terjed. • Telítettség: A színtelítettség beállításához. A beállítási tartomány 0-tól 100-ig terjed. • Színhőmérs.: A kívánt színhőmérséklet kiválasztására való.
4. Kép A kép élességét, méretarányát, VividPixelt, ASCR-t, helyzetét, fókuszát és az automata beállítást csak ebből a főmenüből állíthatja be. Kép VP249 Normál mód VGA 1920 x 1080 @ 60Hz Élesség Trace Free Képarány-beállítás VividPixel ASCR Helyzet Fókusz AUTO. Beállítás • Élesség: A kép keménységének beállítása. A beállítási tartomány 0-tól 100-ig terjed. • Trace Free: a válaszidő gyorsításához Over drive technologia segítségével.
5. Bemenetválasztás Válassza ki a bemeneti forrást.
VP249Q Bemenetválasztás VP249 Normál mód VGA 1920 x 1080 @ 60Hz VGA HDMI DisplayPort 3-7 3.
6. Rendszer beállítás Beállítja a rendszerkonfigurációt. VP249N VP249 Rendszer beállítás Normál mód VGA 1920 x 1080 @ 60Hz Splendid Demo Mode GamePlus ECO Mode OSD beállítás Nyelv Gombzár Információ Több (1/2. oldal) VP249 Rendszer beállítás Normál mód VGA 1920 x 1080 @ 60Hz Vissza Működésjelző Főkapcsoló zár Összes alaphelyzetbe (2/2.
VP249H / VP249Q VP249 Rendszer beállítás Normál mód VGA 1920 x 1080 @ 60Hz Splendid Demo Mode Hangerő GamePlus ECO Mode OSD beállítás Nyelv Gombzár Több (1/2. oldal) VP249 Rendszer beállítás Normál mód VGA 1920 x 1080 @ 60Hz Vissza Információ Működésjelző Főkapcsoló zár Összes alaphelyzetbe (2/2. oldal) 3-9 • Splendid Demo Mode: a Splendid funkció demonstrációját aktiválja. • Hangerő (csak a VP249H / VP249Q típusokon): A hangerő beállításához.
7. • ECO Mode: Energiatakarékosság érdekében aktiválja az ökológiai üzemmódot. • OSD beállítás: Az OSD képernyő OSD időtúllépésének, DDD/ CI átvitelének és Átlátszóságának beállítását teszi lehetővé. • Nyelv: Az OSD nyelv kiválasztását teszi lehetővé. • Gombzár: A jobb oldali második gomb több mint öt másodpercig tartó lenyomása aktiválja a billentyűzár funkciót. • Információ: Megjeleníti a monitorra vonatkozó információkat. • Több: Visszatér a Rendszerbeállítások menü következő oldalához.
VP249 Parancsikon Normál mód VGA 1920 x 1080 @ 60Hz Parancsikon 1 Kék Fényszűrő Parancsikon 2 Splendid Fényerő AUTO. Beállítás Kontraszt Színhőmérs. GamePlus (Parancsikon 2) VP249H / VP249Q VP249 Parancsikon Normál mód VGA 1920 x 1080 @ 60Hz Parancsikon 1 Kék Fényszűrő Parancsikon 2 Splendid Fényerő AUTO. Beállítás Kontraszt Színhőmérs. Hangerő GamePlus (Parancsikon 1) 3-11 3.
VP249 Parancsikon Normál mód VGA 1920 x 1080 @ 60Hz Parancsikon 1 Kék Fényszűrő Parancsikon 2 Splendid Fényerő AUTO. Beállítás Kontraszt Színhőmérs. Hangerő GamePlus (Parancsikon 2) • • Parancsikon 1: Funkció rendelése az 1. gyorsgombhoz. Lehetséges opciók: Kék Fényszűrő, Splendid, Fényerő, Auto. Beállítás, Kontraszt, Színhőm., Hangerő (csak a VP249H/VP249Q típusok) és GamePlus. Az alapbeállítás: Brightness (Fényerő). Parancsikon 2: Funkció rendelése a 2. gyorsgombhoz.
3.1.2.1GamePlus funkció A GamePlus funkció eszköztárat kínál és jobb játékkörnyezetet biztosít a játékosok számára különböző típusú játékok játszása esetén. A négy különböző célkereszt lehetőséggel rendelkező Célkereszt overlay lehetővé teszi a játékhoz legmegfelelőbb kiválasztását. A képernyőn látható Időzítő a kijelző bal oldalán helyezhető el az eltelt játékidő nyomon követéséhez. A GamePlus aktiválásának módja: 1. 2. 3. 4. 5. 6. 7. 8. Nyomja meg a Menu gombot, hogy aktiválja az OSD menüt.
3.2 Műszaki adatok Típus VP249N VP249H VP249Q Panel mérete 23,8 hüvelyk (60,5 cm) átlósan (Aktív képterület: 527,04 (V) x 296,46 (F) mm) Max. felbontás 1920 x 1080 Fényerő (jellemző) 250 cd/m2 Kontrasztarány (jellemző) 1000:1 Látószög (CR≤10) 178°(F); 178°(V) Megjeleníthető színek száma 16,7 M szín (6 bit + FRC) Válaszidő (jellemző) 5 ms (GTG s) Kivezetések Hangszóró Bemenetek: 1 VGA, 1 DVI 1 VGA, 1 HDMI Hangbemenet: n.a. Igen Hangszóró teljesítménye: n.a.
3.3 Hibaelhárítás (GYIK) Probléma A bekapcsolt állapotot jelző LED NEM világít Lehetséges megoldás • Nyomja meg a gombot, hogy meggyőződjön, bekapcsolt állapotban van a monitor. • Ellenőrizze, hogy megfelelően csatlakozik-e a hálózati tápkábel a monitorhoz, illetve a konnektorhoz. • A bekapcsolt állapotot jelző fény funkciójának ellenőrzése az OSD főmenüben. Válassza az “ON” (Be) lehetőséget a működésjelző LED bekapcsolásához. A működésjelző LED sárga színnel világít és nincs kép.
3.