VP279-sarja Nestekidenäyttö Käyttöopas
Ensimmäinen painos: Marraskuu 2018 Copyright © 2018 ASUSTeK COMPUTER INC. KAIKKI OIKEUDET PIDÄTETÄÄN. Mitään osaa tästä käsikirjasta, mukaan lukien siinä kuvattuja tuotteita ja ohjelmistoja, ei saa jäljentää, välittää, siirtää toiselle tietovälineelle, tallentaa tallennusjärjestelmään tai kääntää millekään kielelle missään muodossa tai millään menetelmällä, paitsi ostajan omaa varmuuskopiota varten, ilman ASUSTek COMPUTER INC:in kirjallista lupaa. ("ASUS").
Sisältö Ilmoitukset.................................................................................................... iv Turvallisuustiedot........................................................................................ vi Huolto ja puhdistus................................................................................... viii Takaisinottopalvelut.................................................................................... ix 1.1 Tervetuloa!...............................................
Ilmoitukset Federal Communications Commission (FCC) -ilmoitus Tämä laite on FCC-sääntöjen Osan 15 mukainen. Käyttöön sovelletaan kahta ehtoa: • Tämä laite ei saa aiheuttaa haitallista häiriötä ja • tämän laitteen on otettava vastaan kaikenlaiset häiriöt, mukaan lukien häiriö, joka voi aiheuttaa virheellistä toimintaa. Tämä laite on testattu, ja sen on todettu täyttävän luokan B digitaalilaitteiden rajat FCC-sääntöjen kohdan 15 mukaisesti.
TCO-tiedot Onnittelut! Tämä tuote on TCO Certified -varmennettu ympäristöä säästävää IT-toimintaa varten TCO Certified on IT-alan tuotteiden kansainvälinen kolmannen osapuolen ympäristöä säästävän tuotannon sertifikaatti. TCO Certified varmistaa, että IT-tuotteiden valmistus, käyttö ja kierrätys on ympäristöllisesti, sosiaalisesti ja taloudellisesti vastuullista toimintaa. Jokainen TCO Certified -tuote on valtuutetun, itsenäisen testilaboratorion tarkistama.
Yksityiskohtaiset kriteerit ovat ladattavissa osoitteessa www.tcodevelopment.com, jossa on myös haettavissa oleva tietokanta kaikista TCO Certified -IT-tuotteista. TCO Development, organisaatio TCO Certified -toiminnan taustalla, on ollut kansainvälinen toiminnan kehittäjä ympäristöä säästävässä IT-alan tuotannossa jo 20 vuotta. TCO Certified -kriteerit on kehitetty tiedemiesten, asiantuntijoiden, käyttäjien ja valmistajien yhteistyönä.
• Älä koskaan työnnä esineitä tai kaada mitään nesteitä näyttökotelon rakoihin. • Varmistaaksesi tyydyttävän toiminnan, käytä näyttöä vain UL listed -standardin mukaisten tietokoneiden kanssa, joilla on asianmukaisesti määritetyt liitännät, joiden merkitty jännitearvoväli on 100–240 V AC. • Pistorasian on oltava lähellä laitetta helposti tavoitettavissa olevassa paikassa. • Jos näytössä ilmenee teknisiä ongelmia, ota yhteys pätevään huoltoteknikkoon tai jälleenmyyjään.
Huolto ja puhdistus • Ennen näytön nostamista tai siirtämistä on hyvä irrottaa kaapelit ja virtajohto. Käytä oikeita nostotekniikoita, kun siirrät näyttöä. Pidä kiinni näytön reunoista, kun nostat tai kannat sitä. Älä nosta näyttöä telineestä tai johdosta. • Puhdistaminen. Sammuta näyttö ja irrota virtajohto pistorasiasta. Puhdista näytön pinta nukkaamattomalla, hiomattomalla liinalla. Piintyneet tahrat voi poistaa miedolla puhdistusaineella kostutetulla liinalla.
Mistä löytyy lisätietoja Katso lisätietoja sekä tuotteen ja ohjelmiston päivityksiä seuraavista lähteistä. 1. ASUS-web-sivustot ASUS-web-sivustot tarjoavat maailmanlaajuisesti päivitettyä tietoja ASUS-laitteisto- ja ohjelmistotuotteista. Katso lisätietoja osoitteesta http://www.asus.com 2. Valinnaiset asiakirjat Tuotepakkaukseesi saattaa sisältyä jälleenmyyjän mahdollisesti lisäämiä valinnaisia asiakirjoja. Nämä asiakirjat eivät ole osa vakiopakkausta.
1.1 Tervetuloa! Kiitos, kun valitsit ASUS®-nestekidenäytön! Uusin ASUKSEN laajakuva-nestekidenäyttö tarjoaa terävämmän, leveämmän ja kirkkaamman näytön. Siinä on myös joukko ominaisuuksia, jotka parantavat katsomiskokemustasi. Nämä ominaisuudet mahdollistavat nauttimisen mukavasta ja miellyttävästä visuaalisesta kokemuksesta, jonka näyttö sinulle tuottaa! 1.
1.3 Näytön jalustan kokoaminen VP279QG 1. Aseta näyttö kuvaruutu alaspäin pöydälle. 2. Liitä jalusta varteen. 3. Kierrä ruuvia myötäpäivään kiinnittääksesi jalustan. •• On suositeltava peittää pöydän pinta pehmeällä liinalla näytön vahingoittumisen estämiseksi.
VP279QGL 1. Aseta näyttö kuvaruutu alaspäin pöydälle. 2. Kierrä vartta 90˚ vastapäivään. 3. Liitä jalusta varteen. 4. Kierrä ruuvia myötäpäivään kiinnittääksesi jalustan. •• 1-3 On suositeltava peittää pöydän pinta pehmeällä liinalla näytön vahingoittumisen estämiseksi.
1.4 Liitä kaapelit 1.4.1 Nestekidenäyttö takaa 100 mm 100 mm 100 mm 100 mm HDMI HDMI VGA 1 1 2 3 5 2 HDMI VGA 6 7 2 3 2 4 4 5 8 VP279QG HDMI VGA 6 7 8 VP279QGL 1. Ohjainpainikkeet 5. DisplayPort 2. Kaiuttimet 6. HDMI-portti 3. AC-IN-portti 7. VGA-portti 4. Kensington-lukko 8.
1.5 Näytön johdanto 1.5.1 Ohjainpainikkeiden käyttö Käytä näytön alaosan ohjainpainikkeita kuva-asetusten säätämiseen. Paina näppäintä 1-6 aktivoidaksesi näppäinluettelosivun. Menu Close Input Select QuickFit Brightness Blue Light Filter 1. 2 3 4 5 6 1 2 3 4 5 6 7 Pikavalintanäppäin2: • 2. Tämä on pikavalintanäppäin. Blue Light Filter (Sinisen valon suodattimen) oletusasetus on Taso 0. Pikavalintanäppäin1: • 3. Tämä on pikavalintanäppäin. Oletusasetus on Brightness (Kirkkaus).
• 4. QuickFit-toiminto sisältää useita tavallisen ristikkokuvion, paperikoon ja valokuvakoon valintoja. Katso lisätietoja sivu 1-7-osasta. Tulopainike: • 5. Vaihda tulolähde. Sulje-painike: • 6. Sulkee kuvaruutuvalikon. Valikkopainike: • 7. Avaa kuvaruutuvalikko. Virtapainike / Virran merkkivalo: • Paina tätä painiketta kytkeäksesi näytön päälle/pois. • Virran merkkivalon värimääritys näkyy alla olevassa taulukossa.
1.5.2 QuickFit-toiminto QuickFit-toiminto sisältää kolme kuviota: (1) Ristikko (2) Paperikoko (3) Valokuvakoko. 1. Ristikkokuvio: Auttaa suunnittelijoita ja käyttäjä järjestämään sisältöä ja asettelua yhdellä sivulla ja saavuttamaan yhdenmukaisen ulkoasun ja tuntuman. Alignment Grid 1 2. Alignment Grid 2 Paperikoko: Tarjoaa käyttäjälle mahdollisuuden tarkastella asiakirjoja näytöllä todellisessa koossa. A4 B5 A4 B5 Kirje Letter EXIT 3.
2.1 Alustan irrottaminen (VESAseinäkiinnitys) VP279QG Toimi seuraavasti irrottaaksesi alustan: 1. Irrota virta- ja signaalikaapelit. Aseta näyttö varovasti kuvaruutu alaspäin puhtaalle pöydälle. 2. Kierrä alustan pohjassa olevaa ruuvia vastapäivään löysätäksesi sitä. 3. Poista alusta jalustakokoonpanosta. 4. Irrota jalustan kansi. Löysää sitten 4 ruuvia varren irrottamiseksi. 5. Kohdista ja asenna seinäkiinnityskannatin näytön takana.
VP279QGL Toimi seuraavasti irrottaaksesi alustan: 1. Irrota virta- ja signaalikaapelit. Aseta näyttö varovasti kuvaruutu alaspäin puhtaalle pöydälle. 2. Löysää 4 varren kiinnitysruuvia. 3. Irrota jalustakokoonpano (varsi ja näytön alusta). 4. Kohdista ja asenna seinäkiinnityskannatin näytön takana. VESA-seinäkiinnikkeen ruuvinrei'ät (100 x 100 mm) •• • • 2-2 On suositeltava peittää pöydän pinta pehmeällä liinalla näytön vahingoittumisen estämiseksi.
2.2 Näytön säätäminen • Optimaalista näyttämistä varten on suositeltavaa katsoa näyttöä kohtisuoraan ja säätää sitten näyttö itselle mukavimpaan kulmaan. • Pidä kiinni telineestä estääksesi näytön putoamisen, kun muutat sen kulmaa. VP279QG Voit säätää näytön kulmaa välillä -5˚ - 22˚.
130 mm • Säädettävä korkeus: 130mm Muuttaaksesi näytön suuntauksen, toimi seuraavasti: 1. Nosta näyttö korkeimpaan sijaintiinsa(130 mm). Kallista sitten näyttöä hieman taaksepäin. 2. Kierrä näyttöä (90° myötä- tai vastapäivään) pystyasentoon. 90° 90° •• 2-4 On normaalia, että näyttö tärisee hieman katsomiskulmaa säädettäessä.
3.1 OSD (Kuvaruutuvalikko) -valikko 3.1.1 Määrittäminen Splendid ASUS VP279 Standard Mode HDMI 1920 x 1080 @ 60Hz Scenery mode Standard Mode Theater Mode Game Mode Night View Mode sRGB Mode Reading Mode Darkroom Mode 1. Aktivoi OSD-valikko painamalla Menu-painiketta. 2. Paina - ja -painikkeita vaihtaaksesi valintojen välillä valikossa. Kun siirryt yhdestä kuvakkeesta toiseen, valinnan nimi näkyy korostettuna. 3. Paina -painiketta valitaksesi valikossa korostetun kohteen. 4. Paina ja 5.
3.1.2 1. OSD (Kuvaruutuvalikko) -toiminnon johdanto Splendid Tämä toiminto sisältää kahdeksan alatoimintoa, joista voit valita haluamasi. Kullakin tilalla on Nollausvalinta, joka antaa sinun pitää asetuksesi tai palauttaa esiasetustilaan.
• • • 2. Vakiotilassa Värikylläisyys-, Ihon väri -, Terävyys ja ASCR-toiminnot eivät ole käyttäjän määritettävissä. sRGB-tilassa Värikylläisyys, Värilämpötila, Ihon väri, Terävyys, Kirkkaus, Kontrasti ja ASCR-toiminto eivät ole käyttäjän määritettävissä. Lukemistilassa Värikylläisyys-, Ihon väri -, ASCR-, Kontrasti- ja Värilämpötila-toiminnot eivät ole käyttäjän määritettävissä. Blue Light Filter (Sinisen valon suodatin) LED-taustavalon säteilemän sinisen valon energiatason vähentämiseen.
3. Color (Väri) Valitse tällä toiminnolla kuvan väri, josta pidät. Color ASUS VX279 Standard Mode HDMI 1920 x 1080 @ 60Hz Brightness Contrast Saturation Color Temp. Skin Tone • Brightness (Kirkkaus): Kirkkaustason säätämiseen. Säätöalue on 0–100. • Contrast (Kontrasti): Kontrastitason säätämiseen. Säätöalue on 0–100. • Saturation (Värikylläisyys): Värikylläisyystason säätämiseen. Säätöalue on 0–100. • Color Temp. (Värilämpötila): Valitse haluttu värilämpötila.
4. Image (Kuva) Voit säätää kuvan Sharpness (Terävyys-), Trace Free -, Aspect Control (Kuvasuhteen ohjaus -), VividPixel-, ASCR-, Adaptive-Sync/ FreeSync, ELMB, Position (Sijainti), Focus (Tarkennus) ja Auto Adjust (Automaattinen säätö) -asetusta tästä päätoiminnosta.
• Aspect Control (Kuvasuhteen säätö): Säädä kuvasuhteeksi "Full (Täysi)", "4:3" tai "OverScan". • • • VividPixel: ASUS oma teknologia, joka tuottaa luonnonmukaisia visuaalisia näkymiä kristallinkirkkaina ja yksityiskohtaisina. Säätöalue on 0–100. • ASCR: Valitse ON (PÄÄLLE) tai OFF (POIS) ottaaksesi käyttöön tai pois käytöstä dynaamisen kontrastisuhdetoiminnon.
5. Input Select (Tulovalinta) Valitse tulolähde. ASUS VP279 Input Select Standard Mode HDMI 1920 x 1080 @ 60Hz VGA HDMI DisplayPort 6. System Setup (Järjestelmäasetus) Säädä järjestelmän määritys.
ASUS VP279 System Setup Standard Mode HDMI 1920 x 1080 @ 60Hz Power Indicator Power Key Lock All Reset (Sivu 2/2) 3-8 • Splendid Demo Mode: Aktivoi Splendid-toiminnon esittelytila. • Volume (Äänenvoimakkuus): Äänenvoimakkuuden tason säätämiseen. • GamePlus: Määritä GamePlus-toiminto. Katso lisätietoja sivu 3-10-osasta. • ECO Mode: Aktivoi ekologiatila virran säästämiseksi.
7. Shortcut (Pikavalinta) Määritä erityinen toiminto kahdelle pikavalintanäppäimelle. ASUS VP279 Shortcut Standard Mode HDMI 1920 x 1080 @ 60Hz Shortcut 1 Blue Light Filter Shortcut 2 Splendid Brightness Auto Adjust Contrast Color Temp. Volume GamePlus (Shortcut 1(Pikavalinta 1)) ASUS VP279 Shortcut Standard Mode HDMI 1920 x 1080 @ 60Hz Shortcut 1 Blue Light Filter Shortcut 2 Splendid Brightness Auto Adjust Contrast Color Temp.
• Shortcut 2 (Pikavalinta 2): Toiminnon määrittämiseen Pikavalintanäppäin 2:lle. Käytettävissä olevat valinnat: Blue Light Filter (Sinisen valon suodatin), Splendid, Brightness (Kirkkaus), Auto Adjust (Automaattinen säätö), Contrast (Kontrasti), Color Temp. (Värilämpötila), Volume(Äänenvoimakkuus) ja GamePlus. Oletusasetus on Blue Light Filter (Sinisen valon suodatin). 3.1.2.
GamePlus - Crosshair (Hiusristikko) GamePlus - Timer (Ajastin) GamePlus - Timer (Ajastin) Position (Sijainti) GamePlus - FPS - Position (Sijainti) FPS Position ASUS-nestekidenäyttö VP279-sarja Position 3-11
3.2 Tekniset tiedot Malli VP279QG VP279QGL Paneelin koko 68,58 cm (halkaisija) (Aktiivinen näyttöalue: 597,9 (V) x 336,3 (P) mm) Maksimiresoluutio 1920 x 1080 Kirkkaus (tyyp.) 250 cd/m2 Kontrastisuhde (tyyp.) 1000:1 Katsomiskulma (CR≤10) 178°(P); 178°(V) Näyttövärit 16,7 miljoonaa väriä (6 bittiä + Edistynyt FRC) Vasteaika 5 ms (GTGσ) Päätteet Tulot: HDMI x 1, DP x 1, VGA x 1 Audiolähtö: Kuulokkeet Audiokaiutin: Stereo 2 W x 2 Virrankulutus 29 W (Maks.
3.3 Vianetsintä ja usein kysyttyä Ongelma Virran LED-merkkivalo ei pala. Mahdollinen ratkaisu • Paina -painiketta tarkistaaksesi onko näyttö kytketty päälle. • Tarkista, onko verkkolaite ja virtajohto on liitetty kunnolla näyttöön ja pistorasiaan. • Tarkista Power Indicator (Virran merkkivalo) -toiminto OSD-valikossa. Valitse "PÄÄLLE" kytkeäksesi virran LED-merkkivalon päälle. Virran LED-merkkivalo palaa keltaisena eikä näytössä näy kuvaa. • Tarkista onko näyttö ja tietokone kytketty päälle.
3.
3.
VP279QGL 3-16 Luku 3: Yleinen ohje