VS228T-P LCD-monitor Gebruikshandleiding
Inhoudsopgave Opmerkingen................................................................................................ iii Veiligheidsinformatie.................................................................................. iv Onderhoud en reiniging............................................................................... v 1.1 Welkom!......................................................................................... 1-1 1.2 Inhoud van verpakking..........................................
Opmerkingen Kennisgeving van Federal Communications Commission Het apparaat voldoet aan deel 15 van de FCC-regels. De werking is onderhevig aan de volgende twee omstandigheden: • Dit apparaat mag geen schadelijke interferentie veroorzaken, en • Dit apparaat moet alle ontvangen interferentie accepteren, waaronder interferentie die een ongewenste werking kan veroorzaken. Dit apparatuur is getest en voldoet aan de beperkingen voor een digitaal apparaat klasse B, volgens deel 15 van de FCC-regels.
Veiligheidsinformatie iv • Alle documentatie die bij de verpakking is geleverd zorgvuldig doorlezen, alvorens de monitor in te stellen. • De monitor niet blootstellen aan regen of vocht om gevaar op brand of schokken te vermijden. • Probeer de monitorkast nooit te openen. De gevaarlijke hoge spanningen in de monitor kunnen ernstig lichamelijk letsel tot gevolg hebben. • Als de stroomtoevoer defect is, deze niet zelf proberen te repareren.
Onderhoud en reiniging • Voordat u de monitor optilt of verplaatst, is het beter om alle kables en de stroomkabel te ontkoppelen. Volg de juiste heftechnieken bij het plaatsen van de monitor. Pak de randen van de monitor beet wanneer u de monitor optilt of draagt. Til het scherm niet op aan de voet of de kabel. • Reinigen. Schakel uw monitor uit en haal de stroomkabel uit het stopcontact. Reinig het oppervlak van de monitor met een pluisvrije, niet schurende doek.
Waar kunt u meer informatie vinden Raadpleeg de volgende bronnen voor aanvullende informatie en producten softwarebijwerkingen. vi 1. ASUS websites De wereldwijde ASUS websites bieden bijgewerkte informatie over de hardware- en softwareproducten van ASUS. Raadpleeg http://www. asus.com 2. Optionele documentatie Uw productverpakking kan aanvullende documentatie bevatten die door uw dealer kunnen zijn toegevoegd. Deze documenten vormen geen onderdeel van de standaardverpakking.
1.1 Welkom! Hartelijk dank voor het aanschaffen van de ASUS® LCD-monitor van de serie VS228T-P! De meest recente breedbeeld LCD-monitor van ASUS biedt een scherpere, bredere en helderdere weergave, evenals een reeks kenmerken die uw kijkervaring verruimen. Met deze kenmerken kunt u genieten van het gemak en de geweldige visuele ervaring die de VS228T-P Serie u geeft! 1.
1.3 De voet van de monitor installeren De voet van de monitor installeren: 1. Sluit de voet aan op de monitorarm en draai deze rechtsom. Wanneer u een klik hoort, betekent dit dat de voet goed is bevestigd. 2. Pas de monitor aan op de hoek die het meest comfortabel is voor u. Wij raden aan dat u het tafeloppervlak afdekt met een zachte doek om schade aan de monitor te voorkomen. 2 1 1.4 Kabels aansluiten De kabels aansluiten: Sluit de kabels die u nodig hebt aan op basis van hoofdstuk 1.5.
1.5 Inleiding tot de monitor 1.5.1 Voorzijde van de LCD-monitor 1 1. 3 4 5 6 Knop: • Het beeld automatisch aanpassen op de optimale positie, klok en fase door gedurende 2 tot 4 seconden op deze knop te drukken (uitsluitend voor VGA-modus). ( ) • Gebruik deze sneltoets om te schakelen tussen de zes vooraf ingestelde modi (Landschap, Standaard, Theater, Spel, Nacht en sRGB) met SPLENDID™-videoverbeteringstechnologie.
• 5. Invoerselectieknop: • 6. 1-4 Dit is ook een sneltoets voor het aanpassen van de helderheid. Gebruik deze sneltoets om te schakelen tussen de VGA- en DVI-ingangen. Stroomknop/stroomindicator: • Druk op de knop om de monitor aan en uit te zetten. • de kleurendefinitie van de stroomindicator staat in de onderstaande tabel.
1.5.2 Achterzijde van de LCD-monitor 1 1. AC-ingang 2. Audio-ingang 3. DVI-ingang 4.
2.1 De arm/voet ontkoppelen (voor VESAwandbevestiging) De afneembare standaard van de LCD-monitor van de VS228T-P-serie is speciaal ontworpen voor VESA-wandbevestiging. De arm/voet afnemen: 1. Trek aan de stophendel en draai deze linksom om te ontgrendelen. 2. Maak de voet los van de monitor. 3. Gebruik uw vingers om de plaat die de hals van de standaard bedekt, voorzichtig los te maken. Gebruik een schroevendraaier om de vier schroeven te verwijderen die de voet op de monitor bevestigen.
2.2 De monitor afstemmen • Voor een optimale weergave, raden wij aan dat u naar de volledige voorzijde van de monitor kijkt en de monitor op de hoek afstemt die het meest comfortabel is voor u. • Hou de voet vast om te voorkomen dat de monitor valt bij het wijzigen van de hoek. • U kunt de hoek van de hoek van de monitor veranderen van -5 tot 20 graden.
3.1 OSD (On-Screen Display) menu 3.1.1 Opnieuw configureren VS228 Splendid Landschap Kleur Standaard Beeldinst Theater Ingangsselectie Spel Systeem-instelling Nacht sRGB Move 1. 2. 3. 4. Exit Druk op de menuknop [MENU] om het OSD-menu te activeren. Druk op en om door de functies te bladeren. Markeer en activeer de gewenste functie door op de knop [MENU] te drukken.
• • • • • Standaard: Dit is de beste keuze om een document te bewerken met SPLENDID™ videoverbetering. Theater: Dit is de beste keuze om een film te bekijken met SPLENDID™ videoverbetering. Spel: Dit is de beste keuze om een spel te spelen met SPLENDID™ videoverbetering. Nacht: Dit is de beste keuze om een donker spel te spelen of een film te kijken met SPLENDID™ videoverbetering. sRGB: Dit is de beste keuze voor het weergeven van foto's en afbeeldingen van pc's.
3. Beeldinst U kunt de Scherpte, Beeldaspect aanpassen, de Positie (alleen VGA) en de Scherpstellen (alleen VGA) afstemmen vanaf deze hoofdfunctie. VS228 Splendid Scherpte Kleur Beeldaspect aanpassen Beeldinst ASCR • • • • • Uit Ingangsselectie Positie Systeem-instelling Scherpstellen Move 40 Volledig scherm Menu Exit Scherpte: stemt de scherpte van de foto af. Het afstelbereik gaat van 0 tot 100. (Uitgeschakeld in “Standaard” en “sRGB” in het Splendidmenu.
4. Ingangsselectie Kies voor de ingangsbron tussen VGA en DVI. VS228 Splendid VGA Kleur DVI Beeldinst Ingangsselectie Systeem-instelling Move 5. Menu Exit Systeem-instelling Stemt de systeemconfiguratie af.
3-5 • ECO Mode: activeer de ecologiemodus voor energiebesparing. (Sommige grijswaarden worden mogelijk niet onderscheiden als ECO is ingesteld op AAN. De helderheid is lager dan dat wanneer de contrastverhouding wordt ingesteld op 100.) • OSD-instelling: stemt de horizontale positie (H-positie), verticale positie (V-positie), OSD Timeout, DDC/CI en Doorzichtigheid af van het OSD-scherm. • Taal: selecteer de OSD-taal.
3.2 Specificaties Model Paneelgrootte Max. Resolutie Achtergrondverlichtingstechnologie Helderheid (std.) Intrinsieke contrastverhouding (std.) VS228T-P 54,6 cm (21,5") B 1920 x 1080 (FHD) LED-achtergrondverlichtingstechnologie 250cd/m2 1000:1 Kijkhoek (CR = 10) ≧170° (H) / ≧160° (V) Weergavekleuren 16,7 miljoen Responstijd 5 ms Audio-ingang Ja DVI-ingang Ja D-Sub ingang Ja Stroom AAN verbruik NB Stroom AAN < 21,1W* * Gebaseerd op de Energy Star 6.
3.3 Probleemoplossing (Veelgestelde vragen) Probleem Stroom-LED brandt niet De stroom-LED brandt amberkleurig en er is geen schermbeeld Het schermbeeld is te licht of te donker Schermbeeld is niet gecentreerd of heeft niet de juiste afmeting Mogelijke oplossing • Druk op de knop om te controleren of de monitor aan staat. • Controleer of de stroomkabel goed is aangesloten op de monitor en de netvoeding. • Controleer of de monitor en de computer aan staan.
3.