VS229D/N/NR/H/ HR/H-P VS239N/NR/H/HR/H-P Monitor LCD Podręcznik użytkownika
Spis treści Uwagi iii Informacje związane z bezpieczeństwem.................................................. iv Dbanie i czyszczenie................................................................................... vi 1.1 Witamy!.......................................................................................... 1-2 1.2 Zawartość opakowania................................................................. 1-2 1.3 Montaż podstawy monitora..........................................................
Uwagi Oświadczenie o zgodności z przepisami Federal Communications Commission (Federalna Komisja Łączności) Urządzenie to jest zgodne z Częścią 15 przepisów FCC. Jego działanie wymaga spełnienia następujących dwóch warunków: • Urządzenie to nie może powodować żadnych szkodliwych zakłóceń i • Urządzenie to musi akceptować wszelkie odbierane zakłócenia, włącznie z zakłóceniami nieprzewidywalnymi.
Informacje związane z bezpieczeństwem iv • Przed wykonaniem ustawień monitora należy uważnie przeczytać całą, dostarczoną w opakowaniu dokumentację. • Aby zapobiec pożarowi lub porażeniu prądem elektrycznym, nigdy nie należy narażać monitora na działanie deszczu lub wilgoci. • Nigdy nie należy otwierać obudowy monitora. Niebezpieczne, wysokie napięcie wewnątrz monitora może spowodować poważne obrażenia fizyczne. • W przypadku uszkodzenia zasilacza nie wolno naprawiać go samemu.
• W przypadku wystąpienia problemów technicznych z monitorem należy skontaktować się z wykwalifikowanym technikiem serwisu lub ze sprzedawcą. • Gniazdko ścienne powinno być zainstalowane w pobliżu urządzenia i łatwo dostępne. • Przy wyświetlaczach z połyskującymi ramkami, użytkownik powinien rozważyć usytuowanie wyświetlacza, ponieważ ramka może powodować przeszkadzające odbicia od światła otoczenia i jasnych powierzchni.
Dbanie i czyszczenie • Przed zmianą pozycji monitora zaleca się odłączenie kabli i przewodu zasilającego. Podczas zmiany pozycji monitora należy stosować właściwe techniki podnoszenia. Podczas podnoszenia lub przenoszenia należy chwycić za krawędzie monitora. Nie należy podnosić wyświetlacza za podstawę lub za przewód. • Czyszczenie. Wyłącz monitor i odłącz przewód zasilający. Oczyść powierzchnię monitora pozbawioną luźnych włókien, nie szorstką szmatką.
Gdzie można znaleźć więcej informacji W celu uzyskania dodatkowych informacji i aktualizacji produktu i oprogramowania, sprawdź następujące źródła. 1. Strony sieci web ASUS Ogólnoświatowe strony sieci web ASUS zapewniają zaktualizowane informacje o urządzeniach i programowych produktach ASUS. Sprawdź http://www.asus.com 2. Opcjonalna dokumentacja Opakowanie z produktem może zawierać opcjonalną dokumentację, która mogła zostać dodana przez dostawcę. Te dokumenty nie są części standardowego opakowania.
1.1 Witamy! Dziękujemy za zakupienie monitora LCD ASUS serii® VS229/VS239! Najnowszy szerokoekranowy monitor LCD ASUS zapewnia wyraźny, szerszy i bardziej jasny wyświetlacz, plus funkcje zwiększające doznania podczas oglądania. Dzięki tym funkcjom, można korzystać z wygodnego i ładnego obrazu, jaki zapewnia seria VS229/VS239! 1.
1.3 Montaż podstawy monitora W celu montażu podstawy monitora: 1. Zamontuj podstawę do wspornika i zamocuj śrubą w celu ich mocnego połączenia. Śrubę można łatwo dokręcić palcami. 2. Wyreguluj kąt nachylenia monitora, do najbardziej wygodnej pozycji. Zalecamy przykrycie powierzchni stołu miękkim materiałem, aby zabezpieczyć monitor przed uszkodzeniem. 1 2 2 1 Upewnij się, że podstawa jest pewnie przykręcona do wspornika. 1.
1.5 Wprowadzenie do monitora 1.5.1 Przód monitora LCD H/HR/H-P D/N/NR 1 1. 2. Przycisk 3 4 5 6 : • Automatyczna regulacja optymalnej pozycji obrazu, zegara i fazy, poprzez długie naciśnięcie tego przycisku na 2-4 sekundy (wyłącznie dla trybu VGA). • Użyj tego przycisku skrótu do przełączania pomiędzy sześcioma wstępnie ustawionymi trybami (Scenery [Sceneria], Standard [Standardowy], Theater [Teatr], Game [Gry], Night View [Widok nocny] i sRGB) z technologią poprawiania video SPLENDID™.
3. 4. 5. • Naciśnij ten przycisk, aby uaktywnić funkcję QuickFit, przeznaczoną do dopasowywania. • Funkcja QuickFit zawiera 7 stron wzorców siatki, rozmiarów papieru i rozmiarów zdjęć. (Sprawdź część 1.5.3 Funkcja QuickFit) Przycisk MENU: • Naciśnij ten przycisk, aby przejść do menu OSD. • Naciśnij ten przycisk, aby przejść/wybrać podświetloną ikonę (funkcję), przy uaktywnionym OSD.
1.5.2 Tył monitora LCD Otwory na śruby do Screw Holes for montażu na ścianie VESA Wall Mount w standardzie VESA 1 1-6 2 3 4 5 1. Wejście prądu zmiennego 2. Wejście HDMI (Dostępne wyłącznie dla modeli VS229H/HR/H-P, VS239H/HR/H-P) 3. Wejście DVI (Dostępne wyłącznie dla modelu VS229N/NR/H/HR/H-P, VS239N/ NR/H/HR/H-P) 4. Wejście VGA 5.
1.5.3 Funkcja QuickFit Funkcja QuickFit zawiera trzy wzorce: (1) Siatka (2) Rozmiar papieru (3) Rozmiar zdjęcia. 1. Wzory siatki Wzory siatki wspomagają projektantów i służą do organizacji zawartości i układu na stronie i osiągnięcie spójnego wyglądu i odczucia. Siatka wyrównania 2.
3. Rozmiar zdjęć Różne rzeczywiste rozmiary zdjęć, wyświetlane w funkcji QuickFit, zapewniają fotografom i innym użytkownikom dokładne widzenie i edycję zdjęć na ekranie w rzeczywistym rozmiarze.
2.1 Odłączanie wspornika/podstawy (do montażu ściennego VESA) Odłączana podstawa monitora LCD serii VS229/VS239 jest specjalnie zaprojektowana do montażu ściennego VESA. W celu odłączenia wspornika/podstawy: 1. Odłacz kable zasialnia i sygnałowy. Ostrożnie połóż monitor ekranem w dół na czystym stole. 2. Delikatnie odciągnij palcami płytę, która zakrywa wspornik podstawy. Użyj śrubokręta do odkręcenia czterech śrub mocujących podstawę do monitora. 3. Odłącz podstawę od monitora.
2.2 Regulacja monitora • Dla uzyskania optymalnego widzenia, zaleca się, aby spojrzeć na pełny ekran monitora, a następnie wyregulować monitor pod najbardziej wygodnym kątem. • Przytrzymaj podstawę, aby zabezpieczyć monitor przed upadkiem podczas zmiany jego kąta nachylenia. • Kąt nachylenia monitora, można regulować pod kątem -5˚ do 20˚.
3.1 Menu OSD (On-Screen Display [menu ekranowe]) 3.1.1 Jak wykonać ponowną konfigurację VS239 Splendid Scenery Mode Color Standard Mode Image Theater Mode Input Select Game Mode System Setup Night View Mode sRGB Move Menu Exit 1. Naciśnij przycisk [MENU], aby uaktywnić menu OSD. 2. Naciśnij i w celu przechodzenia pomiędzy funkcjami. Podświetl i uaktywnij wymaganą funkcję, naciskając przycisk [MENU].
• Standard Mode (Tryb Standardowy): Najlepszy wybór do edycji dokumentów z wykorzystaniem technologii poprawiania video SPLENDID™. • Theater Mode (Tryb Teatr): Najlepszy wybór do oglądania filmów z wykorzystaniem technologii poprawiania video SPLENDID™. • Game Mode (Tryb Gry): Najlepszy wybór do korzystania z gier z wykorzystaniem technologii poprawiania video SPLENDID™.
• Skin Tone (Odcień skóry): Zawiera trzy tryby kolorów, obejmujące Reddish (Czerwonawe), Natural (Naturalne) oraz Yellowish (Żółtawe).  W trybie User Mode (Tryb Użytkownika), użytkownik może konfigurować kolory R (Czerwony), G (Zielony) i B (Niebieski); zakres regulacji wynosi 0 ~ 100. 3. Image (Obraz) Ta główna funkcja umożliwia regulację Sharpness (Wyostrzenie), Aspect Control (Regulacja proporcji), Position (Pozycja) (wyłącznie VGA), i Focus (Ostrość) (wyłącznie VGA).
• 4. Focus (Ostrość): Zmniejsza liniowe zakłócenia poziome i liniowe zakłócenia pionowe obrazu, poprzez oddzielną regulację Phase (Faza) oraz Clock (Zegar). Zakres regulacji wynosi od 0 do 100. (Dostępna wyłącznie dla wejścia VGA.) Input Select (Wybór wejścia) Wybierz źródło wejścia spośród VGA, DVI lub HDMI. VS239 Splendid VGA Color DVI Image HDMI Input Select System Setup Move 5. Menu Exit • DVI: Dostępne wyłącznie dla modelu VS229N/NR/H/HR/H-P, VS239N/NR/H/HR/H-P.
VS239 Splendid Splendid Demo Mode Color Volume Image ECO Mode Input Select OSD Setup System Setup Language OFF 50 OFF English Information 1/2 strona 2/2: Move Menu Exit • Splendid Demo Mode (Tryb Demo Splendid): Uaktywnienie trybu demo dla funkcji Splendid. • Volume (Głośność): Regulacja poziomu wyjścia głośności słuchawek. Zakres regulacji wynosi 0 do 100.
3.2 Specyfikacje Model Wielkość panela VS229D/N/H VS239N/H S 21,5” (54,6 cm) S 23” (58,4 cm) Maks. rozdzielczość 1920 x 1080 (FHD) Techn. podświetlenia Technologia podświetlenia LED Jasność (Typowa) 250cd/m2 Rzeczywisty współczynnik kontrastu (typowy) Kąt widzenia (CR=10) 1000:1 ≧178°(w poziomie) / ≧178°(w pionie) Kolory wyświetlacza 16,7 M Czas odpowiedzi Wyjście słuchawek Dźwięk z HDMI Wejście HDMI (HDMI 1.
Model Wielkość panela VS229NR/HR VS239NR/HR S 21,5” (54,6 cm) S 23” (58,4 cm) Maks. rozdzielczość 1920 x 1080 (FHD) Techn. podświetlenia Technologia podświetlenia LED Jasność (Typowa) 250cd/m2 Rzeczywisty współczynnik kontrastu (typowy) Kąt widzenia (CR=10) 1000:1 ≧178°(w poziomie) / ≧178°(w pionie) Kolory wyświetlacza 16,7 M Czas odpowiedzi Wyjście słuchawek Dźwięk z HDMI Wejście HDMI (HDMI 1.
Model VS229H-P VS239H-P Wielkość panela S 21,5” (54,6 cm) S 23” (58,4 cm) Maks. rozdzielczość 1920 x 1080 (FHD) Techn. podświetlenia Technologia podświetlenia LED Jasność (Typowa) 250cd/m2 Rzeczywisty współczynnik kontrastu (typowy) Kąt widzenia (CR=10) 1000:1 ≧178°(w poziomie) / ≧178°(w pionie) Kolory wyświetlacza 16,7 M Czas odpowiedzi 5 ms (Szary do szarego) Wyjście słuchawek Tak Dźwięk z HDMI Tak Wejście HDMI (HDMI 1.
3.3 Rozwiązywanie problemów (FAQ) Problem Możliwe rozwiązanie WŁĄCZONA dioda LED zasilania • Naciśnij przycisk , aby sprawdzić, czy monitor znajduje się w trybie ON (WŁĄCZENIE). • Sprawdź, czy przewód zasilający jest prawidłowo podłączony do monitora i do gniazda zasilania. Pomarańczowe światło diody LED zasilania i brak obrazu na ekranie • Sprawdź, czy monitor i komputer są w trybie ON (WŁĄCZENIE). • Sprawdź, czy kabel sygnałowy jest prawidłowo podłączony do monitora i komputera.
3.