Instruction Manual

3-3

Chapter 3: General Instruction

3. Image

You can adjust the image Sharpness, Aspect Control, Position (VGA

only), and Focus (VGA only) from this main function.

VS247

Splendid

Color

Image

Input Select

Move Menu Exit

System Setup

Sharpness

Aspect Control

ASCR

Position

Full

OFF

Focus

• Sharpness: Asjust the picture sharpness. The adjusting range

is from 0 to 100. (Only available for selecting “Standard Mode” in

Splendid menu.)

• Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, or “Over

Scan”. (The “Over Scan” ratio is only available for HDMI input.)

• ASCR: Select ON or OFF to enable or disable dynamic contrast

ratio function. (ASCR: ASUS Smart Contrast Ratio. Disabled at

“Standard Mode”.)

• Position: Adjust the horizontal postition (H-Position) and the

vertical position (V-Position) of the image. The adjusting range is

from 0 to 100. (Only available for VGA input.)

• Focus: Reduce Horizonal-line noise and Vertical-line noise of

the image by adjusting (Phase) and (Clock) separately. The

adjusting range is from 0 to 100. (Only available for VGA input.)

4. Input Select

Select the input source from VGA, DVI, or HDMI.