User Guide

2-1

ASUS LCD Monitor VT168

2.1 Detaching the base/stand

(for VESA wall mount)

ThedetachablestandoftheLCDmonitorisspeciallydesignedforVESA

wallmount.

To detach the arm/stand:

1. Disconnectpowerandsignalcables.Carefullyputthefrontofthe

monitorfacedownonacleantable.

2. Useyourngertoloosenthescrewlocatedatthebottomofthebase,

andremovethebasefromthestand.Andthenremovethehinge

coverfrommonitorbodybyusingyourngers.

3. Useascrewdrivertoremovethefourscrewsonthearm,andthen

detachthearm/standfromthemonitor.

• Werecommendthatyoucoverthetablesurfacewithsoftclothto

preventdamagetothemonitor.

• Holdthestandofthemonitorwhileremovingthescrews.

• TheVESAwallmountkit(75x75mm)ispurchasedseparately.

• UseonlytheULListedWallMountBracketwithminimumweight/

load4.8kgaccordingtothemodellistedinthespecificationtable

(Screwsize:M4x10mm).