Serie VT207 Monitor LCD Guida dell’utente
Contenuti Avvisi .......................................................................................................... iii Informazioni sulla sicurezza....................................................................... iv Cura e pulizia................................................................................................ v 1.1 Benvenuto!.................................................................................... 1-1 1.2 Contenuti della confezione................................
Avvisi Dichiarazione della Commissione Federale per le Comunicazioni Questo dispositivo è conforme alla Parte 15 delle Norme FCC. Il funzionamento è soggetto alle seguenti due condizioni: • Questo dispositivo non può provocare interferenze dannose. • Questo dispositivo deve poter ricevere qualsiasi interferenza, incluse quelle che potrebbero causare un funzionamento indesiderato.
Informazioni sulla sicurezza iv • Prima di configurare il monitor, leggere attentamente tutta la documentazione fornita. • Per prevenire pericoli di incendi o scosse elettriche, non esporre il monitor a pioggia o umidità. • Non cercare di aprire l’alloggiamento del monitor. Le alte tensioni pericolose all’interno del monitor potrebbero causare gravi lesioni fisiche. • Se l’alimentatore è rotto, non cercare di ripararlo da soli. Contattare un tecnico qualificato o il proprio rivenditore.
Cura e pulizia • Prima di sollevare o spostare il monitor, è meglio scollegare i cavi e il cavo di alimentazione. Osservare le corrette tecniche di sollevamento durante il posizionamento del monitor. Quando si solleva o trasporta il monitor, afferrarlo dai bordi. Non sollevare il display dal supporto o dal cavo. • Pulizia. Spegnere il monitor e scollegare il cavo di alimentazione. Pulire la superficie del monitor con un panno non abrasivo privo di lanugine.
Dove trovare ulteriori informazioni Consultare le seguenti fonti per ulteriori informazioni e per gli aggiornamenti su prodotti e software. vi 1. Siti web ASUS I siti web ASUS in tutto il mondo forniscono informazioni aggiornate su hardware e software ASUS. Consultare http://www.asus.com 2. Documentazione opzionale La confezione del prodotto potrebbe includere documentazione opzionale aggiunta dal rivenditore. Tali documenti non fanno parte della confezione standard.
1.1 Benvenuto! Congratulazioni per l'acquisto del monitor LCD ASUS® Serie VT207! L’ultimo monitor LCD widescreen ASUS offre immagini nitide, più ampie e più luminose, oltre ad una miriade di caratteristiche che migliorano la visualizzazione. Con queste funzioni si godrà della comodità e della deliziosa esperienza visiva fornita dalla Serie VT207! 1.
1.3 Montaggio della base del monitor Per montare la base del monitor: 1. Collegare la base al supporto del monitor e girare in senso orario. Uno scatto indicherà che la base è stata attaccata correttamente. 2. Regolare il monitor in base all'angolo di visione più comodo. Si consiglia di coprire la superficie del tavolo con un panno morbido per evitare danni al monitor. 2 1 1.4 Collegamento dei cavi Per collegare i cavi: Collegare i cavi necessari in base al capitolo 1.5.2, pagina 1-5.
1.5 Presentazione del monitor 1.5.1 Parte anteriore del monitor LCD 1 1. 2. Tasto 2 3 4 5 : • Consente di regolare automaticamente l'immagine in base a posizione, clock e fase ottimali premendo a lungo questo tasto per 2-4 secondi (solo modalità VGA).
3. 4. Tasto MENU: • Premere questo tasto per accedere al menu OSD. • Quando il menu OSD è attivo, premere questo tasto per accedere/selezionare l'icona (funzione) evidenziata. • Sequenza del tasto QuickFit. Tasto • 5. 1-4 : Premere questo tasto per aumentare il valore della funzione selezionata, oppure per spostarsi alla funzione precedente. È anche un tasto di scelta rapida per la regolazione della Luminosità.
1.5.2 Parte posteriore del monitor LCD 6 5 7 1 1. Porta AC-IN 2. Porta USB (solo per la funzione di tocco) 3. Porta DVI 4. Porta VGA 5. Sistema antifurto Kensington 6. Fori per le viti per il montaggio su parete VESA 7.
1.5.3 Funzione QuickFit La funzione QuickFit contiene due modelli: (1) Griglia (2) Dimensioni foto. 1. Modelli di griglia I modelli di griglia aiutano i designer e gli utenti ad organizzare i contenuti ed il layout di una pagina ed ottenere un look ed una sensazione consistente. Griglia di allineamento 2.
2.1 Staccare il braccio/supporto (per montaggio su parete VESA) Il supporto rimovibile del monitor LCD serie VT207 è ideato particolarmente per montaggio a parete VESA. Per rimuovere il braccio/supporto: 1. Tirare la leva d’arresto e girare in senso antiorario per sbloccare. 2. Staccare la base dal monitor. 3. Con le dita, estrarre delicatamente la piastra che copre il collo del supporto. Utilizzare un cacciavite per rimuovere le quattro viti di fissaggio del supporto al monitor. 4.
2.2 Regolazione del monitor • Per una visione ottimale, si consiglia di guardare l’intero monitor, quindi regolare il monitor in base all’angolo di visione più comodo. • Mantenere il supporto per evitare che il monitor cada mentre si modifica l’angolo. • È possibile regolare l'inclinazione del monitor tra -5˚ e 20˚. • Non toccare lo schermo sensibile al tocco quando si modifica l’angolazione. Diversamente lo schermo sensibile al tocco o lo schermo LCD potrebbe danneggiarsi o rompersi.
3.1 Operazioni di tocco • ASUS VT207 è un monitor sensibile al tocco che utilizza la tecnologia touch panel 10 punti. Utilizzare con sistemi operativi recenti, come Windows 8. • È possibile utilizzare il tocco singolo, oppure il multi-tocco fino a toccare simultanei un massimo di 10 punti. Tocco 10 punti • Per attivare la funzionalità di tocco è necessario collegare il display al computer utilizzando il cavo USB fornito in dotazione. • Non è necessario installare alcun altro software.
Scorrimento dal bordo sinistro (solo su Windows 8) Far scorrere il dito dal lato sinistro dello schermo per mescolare le applicazioni in esecuzione. Scorrimento dal bordo destro (solo su Windows 8) Far scorrere il dito dal lato destro dello schermo per avviare la Charm bar. Scorrimento (solo su Windows 8) Far scorrere il dito per scorrere verso l’alto o il basso e lateralmente per spostare la schermata verso sinistra o destra.
Riduzione Avvicinare due dita sul pannello sensibile al tocco. Ingrandimento Allontanare due dita sul pannello sensibile al tocco. Tocco singolo/Tocco doppio Tocco singolo Toccare rapidamente una volta l’elemento sullo schermo, poi rilasciare.
Doppio tocco Toccare rapidamente due volte l’elemento sullo schermo, poi rilasciare. Toccare un'applicazione per avviarla (solo su Windows 8). Toccare due volte un elemento per avviarlo. Toccare e tenere premuto Per spostare un'applicazione, toccare e tenere premuta l’icona dell’app e trascinarla in una nuova posizione. Per chiudere un'applicazione (solo su Windows 8), toccare e tenere premuto il lato superiore dell’applicazione in esecuzione e trascinarlo verso il basso dello schermo per chiuderla.
NOTA: • È possibile accedere al sito internet del sistema operativo per ottenere altre descrizioni sul funzionamento del tocco. • Non toccare lo schermo con oggetti appuntiti, poiché possono causare danni ed annullare la garanzia. • Non premere con forza, né appoggiare nulla sulla superficie di vetro (se in posizione orizzontale) poiché si può danneggiare lo schermo ed annullare la garanzia. • Toccare lo schermo con mani pulite e asciutte per garantire un funzionamento omogeneo del tocco.
4.1 Menu OSD (On-Screen Display) 4.1.1 Come effettuare la riconfigurazione VT207 Splendid Modalità scenario Colore Modalità standard Immagine Modalità teatro Selezione input Modalità gioco Impostazione Sistema Modalità notturna sRGB Move Menu Exit 1. Premere il tasto [MENU] per attivare il menu OSD. 2. Premere e per navigare tra le funzioni. Evidenziare e attivare la funzione desiderata premendo il tasto [MENU].
• Modalità scenario: è la scelta ottimale per la visualizzazione di foto di paesaggi con SPLENDID™ Video Enhancement. • Modalità standard: è la scelta ottimale per l'editing di documenti con SPLENDID™ Video Enhancement. • Modalità teatro: è la scelta ottimale per guardare film con SPLENDID™ Video Enhancement. • Modalità gioco: è la scelta ottimale per giocare con SPLENDID™ Video Enhancement.
2. Colore Selezionare il colore di immagine preferito con questa funzione. VT207 Splendid Luminosità 100 Colore Contrasto 80 Immagine Saturazione Selezione input Colore Impostazione Sistema Tonalità pelle Naturale Smart View SPENTO Move 50 Modalità Utente Menu Exit • Luminosità: la gamma di regolazione è tra 0 e 100. Il tasto anche un tasto di scelta rapida per attivare questa funzione. • Contrasto: La gamma di regolazione è tra 0 e 100.
4. • Nitidezza: Regola la nitidezza dell’immagine. La gamma di regolazione va da 0 a 100. (Disabilitato solo per la selezione di “Modalità standard” e “Modalità sRGB” nel menu Splendid). • Controlli: Permette di regolare il rapporto proporzioni su “Schermo intero” o “4:3”. • ASCR: Selezionare ATTIVO o DISATTIVA per abilitare o disabilitare la funzione di rapporto contrasto dinamico. (ASCR: ASUS Smart Contrast Ratio. Disabilitato in “Modalità standard” e “Modalità sRGB”.
5. Impostazione Sistema Regola la configurazione del sistema. VT207 Splendid Splendid Demo Mode SPENTO Colore ECO Mode SPENTO Immagine Impostazione OSD Selezione input Lingua Impostazione Sistema Informazioni Italiano Regola Tutto Move 4-5 Menu Exit • Splendid Demo Mode: attiva la modalità demo per la funzione Splendid. • ECO Mode: Attiva la modalità eco per il risparmio energetico. (alcuni livelli di grigio potrebbero non distinguersi con ECO su ON.
4.2 Specifiche Modello Dimensioni schermo VT207N 19,5” W (49,53 cm) Risoluzione max. 1600 x 900 Luminosità (tipica) 200cd/m2 Rapporto di contrasto intrinseco (tipico) Angolo di visione (CR=10) 1000:1 ≧170°(H) / ≧160°(V) Colori dello schermo 16,7 M Tempo di risposta 5ms Ingresso DVI Sì Ingresso D-Sub Sì Porta USB (solo per la funzione di tocco) Sì Consumo all'accensione (ON) Nota Accensione < 16,4 W* * In base allo standard Energy Star 6.
4.3 Risoluzione dei problemi (FAQ) Problema Il LED di alimentazione non è attivo Il LED di alimentazione si accende in giallo e non appare alcuna immagine sullo schermo Immagine su schermo troppo chiara o scura Immagine su schermo non centrata o dimensionata adeguatamente Possibile soluzione • Premere il tasto per controllare se il monitor è in modalità ATTIVO. • Controllare che il cavo di alimentazione sia collegato correttamente al monitor e alla presa di rete.
4.