E3702 V2 Jul 2008 VW224/VW221 Series LCD Monitor User Guide
Table of contents Notices.......................................................................................................... iii Safety information....................................................................................... iv Care & Cleaning ........................................................................................... v Chapter 1: Product introduction 1.1 Welcome! ..................................................................................... 1-1 1.
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information • • • • • • • • • • • • • • iv Before setting up the monitor, carefully read all the documentation that came with the package. To prevent fire or shock hazard, never expose the monitor to rain or moisture. Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Care & Cleaning • • • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. 2. vi ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com Optional documentation Your product package may include optional documentation, such as warranty card, that may have been added by your dealer. These documents are not part of the standard package.
1.1 Welcome! Thank you for purchasing the ASUS® VW224/VW221 Series LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the VW224/VW221 Series brings you! 1.
1.3 Assembling the monitor base To assemble the monitor base: 1. 2. Connect the base with the monitor. A click indicates that the base has been connected successfully. Adjust the monitor to the angle that is most comfortable for you. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
1.4 Monitor introduction 1.4.1 Front of the LCD monitor 1.4.1.1 1. A • • • 2. 3. 4. • • 6. 7. button: 1 2 3 4 5 6 7 Automatically adjust the image to its optimized position, clock, and phase by long pressing this button for 2-4 seconds (for VGA mode only). Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID™ Video Enhancement Technology.
1.4.1.2 1. . 3. 4. 5. 6. 7. 1-4 VW224S/VW221S 1 2 3 4 5 6 7 button: • Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID™ Video Enhancement Technology. • Exit the OSD menu or go back to the previous menu as the OSD menu is active. Button: • Press this button to decrease the value of the function selected or move to the next fuction. • This is also a hotkey for Volume adjustment.
1.4.1.3 VW224D/VW221D 1 1. • • . 3. 4. 5. 6. 7. • 2 4 3 5 6 7 button: Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID™ Video Enhancement Technology. Exit the OSD menu or go back to the previous menu as the OSD menu is active. Button: Press this button to decrease the value of the function selected or move to the next fuction. • This is also a hotkey for Contrast Ratio adjustment.
1.4.2 Rear connectors of the LCD monitor 1 1. 2. 3. 4. 1-6 2 3 4 AC-IN port. This port connects the power connector from the bundled power cord. Audio-in port. This port connects PC audio source by the bundled audio cable.(Only for some models) DVI port. This 4-pin port is for PC (Personal Computer) DVI-D digital signal connection. (Only for some models) VGA port. This 15-pin port is for PC VGA connection.
2.1 Detaching the arm/stand (for VESA wall mount) The detachable stand of the VW224/VW221 Series LCD monitor is specially designed for VESA wall mount. To detach the arm/stand: 1. Remove the arm cover. 3. Use a screwdriver to remove the three screws on the stand of the monitor as the below drawing shows. 2. 4. Have the front of the monitor face down on a table. Detach the arm from the monitor. • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
2.2 • • • Adjusting the monitor For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. Hold the stand to prevent the monitor from falling when you change its angle. You can adjust the monitor’s angle from -5º to 20º.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure 1. Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press and again to navigate through the sub-menu functions. Highlight and activate the desired sub-menu function by pressing the MENU button. 3. Press 4. and to change the settings of the selected function.
2. Image You can adjust brightness, contrast, sharpness, saturation,position (VGA only), and focus (VGA only) from this main function. P1 P2 • • • • • • • 3. Brightness: the adjusting range is from 0 to 100. activate this function. is a hotkey to Contrast: the adjusting range is from 0 to 00. Sharpness: the adjusting range is from 0 to 100. Saturation: the adjusting range is from 0 to 100. ASCR:Select YES or NO to enable or disable dynamic contrast ratio function.
• • Color Temp.: contains five color modes including Cool, Normal, Warm, sRGB, and User mode. Skin Tone: contains three color modes including Reddish, Natural, and Yellowish. In the User mode, colors of R (Red), G (Green), and B (Bluee) are userconfigurable; the adjusting range is from 0- 00. 4. Input Select 5. System Setup In this function, you could only select VGA and DVI input source. Allow you to adjust the system. • • • • • • Volume: the adjusting range is from 0 to 100. this function.
3.2 Specifications summary Model Panel Size VW224U 22"Wide VW224T 22"Wide Max. Resolution WSXGA+ 1680 x 1050 WSXGA+ 1680 x 1050 Brightness (Typ.) 300cd/㎡ 300cd/㎡ Contrast Ratio (Typ.) Viewing Angle (H/V, CR=10) 1000:1 1000:1 ≧160°(V) ; ≧170°(H) ≧160°(V) ; ≧170°(H) Display Colors 16.7 M Response Time 2ms (Gray to Gray) DVI input D-Sub input Satellite Speaker DVI with HDCP 16.
Model VW221S VW221D Panel Size 21.6"Wide 21.6"Wide Max. Resolution WSXGA+ 1680 x 1050 WSXGA+ 1680 x 1050 Brightness (Typ.) 300cd/㎡ 300cd/㎡ Contrast Ratio (Typ.) Viewing Angle (H/V, CR=10) 1000:1 1000:1 ≧160°(V) ; ≧170°(H) ≧160°(V) ; ≧170°(H) Display Colors 16.7 M 16.7 M Response Time 5ms (On/Off) 5ms (On/Off) Yes Yes D-Sub input Satellite Speaker Tilt VESA Wall Mounting 1W x 2 stereo - +20° ~ -5° +20° ~ -5° Yes (100mm x 100mm) Yes (100mm x 100mm) Phys.
3.3 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The power LED lights amber and there is no • Check if the monitor and the computer are screen image in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer. • Inspect the signal cable and make sure none of the pins are bent.
3.4 Supported Timing List Mode VGA SVGA XGA SXGA Resolution H(KHz) V(Hz) Pixel(MHz) 640x480 31.469 60Hz 25.175 640x480 37.861 72Hz 31.5 640x480 37.5 75Hz 31.5 800x600 35.156 56Hz 36 800x600 37.879 60Hz 40 800x600 48.077 72Hz 50 800x600 46.875 75Hz 49.5 1024x768 48.363 60Hz 65 1024x768 56.476 70Hz 75 1024x768 60.023 75Hz 78.75 1152x864 67.5 75Hz 108 1280x960 60 60Hz 108 1280x1024 63.981 60Hz 108 1280x1024 79.976 75Hz 135 WXGA+ 1440x900 55.
