Seria VX239 Monitor LCD Podręcznik użytkownika
Wydanie pierwsze Lipiec 2013 r. Copyright © 2013 ASUSTeK COMPUTER INC. Wszelkie prawa zastrzeżone. Żadnej z części tego podręcznika, włącznie z opisem produktów i oprogramowania, nie można powielać, przenosić, przetwarzać, przechowywać w systemie odzyskiwania danych ani tłumaczyć na inne języki, w jakiejkolwiek formie lub w jakikolwiek sposób, z wyjątkiem wykonywania kopii zapasowej dokumentacji otrzymanej od dostawcy, bez wyraźnego, pisemnego pozwolenia firmy ASUSTeK COMPUTER INC. (“ASUS”).
Spis treści Uwagi............................................................................................................ iv Informacje związane z bezpieczeństwem................................................... v Dbanie i czyszczenie................................................................................... vi Usługa odbioru zużytego sprzętu............................................................. vii 1.1 Witamy!............................................................................
Uwagi Oświadczenie o zgodności z przepisami Federalna Komisja Łączności Urządzenie to jest zgodne z Częścią 15 przepisów FCC. Jego działanie wymaga spełnienia następujących dwóch warunków: • • Urządzenie to nie może powodować żadnych szkodliwych zakłóceń i Urządzenie to musi akceptować wszelkie odbierane zakłócenia, włącznie z zakłóceniami nieprzewidywalnymi.
Informacje związane z bezpieczeństwem • • • • • • • • • • • • • • • Przed wykonaniem ustawień monitora należy uważnie przeczytać całą, dostarczoną w opakowaniu dokumentację. Aby zapobiec pożarowi lub porażeniu prądem elektrycznym, nigdy nie należy narażać monitora na działanie deszczu lub wilgoci. Nigdy nie należy otwierać obudowy monitora. Niebezpieczne, wysokie napięcie wewnątrz monitora może spowodować poważne obrażenia fizyczne. W przypadku uszkodzenia zasilacza nie wolno naprawiać go samemu.
Dbanie i czyszczenie • Przed zmianą pozycji monitora zaleca się odłączenie kabli i przewodu zasilającego. Podczas zmiany pozycji monitora należy stosować właściwe techniki podnoszenia. Podczas podnoszenia lub przenoszenia należy chwycić za krawędzie monitora. Nie należy podnosić monitora za podstawę lub za przewód. • Czyszczenie. Wyłącz monitor i odłącz przewód zasilający. Oczyść powierzchnię monitora pozbawioną luźnych włókien, nie szorstką szmatką.
Gdzie można znaleźć więcej informacji W celu uzyskania dodatkowych informacji i aktualizacji produktu i oprogramowania, sprawdź następujące źródła. 1. Strony sieci web ASUS Ogólnoświatowe strony sieci web ASUS zapewniają zaktualizowane informacje o urządzeniach i oprogramowaniu firmy ASUS. Sprawdź http://www.asus.com 2. Opcjonalna dokumentacja Opakowanie z produktem może zawierać opcjonalną dokumentację, która mogła zostać dodana przez dostawcę. Te dokumenty nie są części standardowego opakowania.
1.1 Witamy! Dziękujemy za zakupienie monitora LCD ASUS®! Najnowszy szerokoekranowy monitor LCD ASUS zapewnia wyraźny, szerszy i jasny wyświetlacz, plus funkcje zwiększające doznania podczas oglądania. Dzięki tym funkcjom, można cieszyć się wygodnymi i wspaniałymi obrazami, jakie zapewnia monitor! 1.
1.3 Wprowadzenie do monitora 1.3.1 Widok z przodu VX239H/H-W 4 6 7 4 2 7 VX239N/N-W 1. Przycisk • 2. 3. 1-2 : Uaktywnianie funkcji QuickFit. (Sprawdź część 1.3.3 Funkcja QuickFit). Przycisk / : / • Naciśnij ten przycisk skrótu, aby przełączyć z sześciu wstępnie ustawionych trybów video (Tryb Sceneria, Tryb Standardowy, Tryb Teatr, Tryb Gra, Tryb Widok nocny i Tryb sRGB) z technologią inteligencji video SPLENDID™.
4. 5. Przycisk MENU: • Włączanie menu OSD. • Uruchamianie wybranego elementu OSD. • Naciśnij ten przycisk i przytrzymaj go przez 5 sekund, aby włączyć funkcję Blokada klawiszy. Naciśnij go ponownie na 5 sekund, aby wyłączyć tę funkcję. Przycisk : • Zwiększanie wartości lub przesuwanie zaznaczenia w prawo/w górę. • Przycisk skrótu Brightness (Jasność) 6.
1.3.2 Widok z tyłu VX239H/H-W HDMI / MHL-1 HDMI / MHL-1 HDMI / MHL-2 HDMI / MHL-2 VGA VGA 4 6 VX239N/N-W DVI DVI VGA 7 2 VGA 5 6 1-4 1. Port HDMI/MHL: Ten port służy do połączenia z urządzeniem zgodnym z HDMI/MHL. 2. Port VGA: Ten 15-pinowy port służy do podłączenia VGA komputera PC. 3. Gniazdo Audio-in: Ten por służy do podłączania źródła audio PC dostarczonym kablem audio. 4. Gniazdo słuchawek: Ten port umożliwia podłączenie słuchawek. 5.
1.3.3 Funkcja QuickFit Funkcja QuickFit umożliwia wyświetlenie podglądu układu dokumentu lub zdjęcia bezpośrednio na ekranie, bez konieczności wykonywania wydruków próbnych. Funkcja QuickFit zawiera trzy wzorce: a. Wzór siatki: Wspomaga projektantów i użytkowników w organizacji zawartości i układu na stronie i osiągnięciu spójnego wyglądu i odczucia. Alignment Grid EXIT b. QuickFit Rozmiar papieru: Udostępnia użytkownikom widok ich dokumentów na ekranie w rozmiarze rzeczywistym. Letter EXIT c.
1.3.4 Funkcja GamePlus Funkcja GamePlus udostępnia zestaw narzędzi i tworzy lepsze środowisko do gier, dla użytkowników grających w różne rodzaje gier. Dodatkowo oferowana jest także funkcja Punkt docelowy, stworzona specjalnie dla nowych i początkujących graczy zainteresowanych grami FPS (ang. First Person Shooter). W celu uaktywnienia GamePlus: 1. Naciśnij przycisk MENU, aby uaktywnić menu OSD. 2.
2.1 Montaż podstawy monitora 2.1.1 Montaż podstawy 1. Połóż monitor ekranem w dół na stole. 2. Zamontuj podstawę do wspornika i zamocuj śrubą w celu ich mocnego połączenia. Śrubę można łatwo dokręcić palcami. 3. Wyreguluj kąt nachylenia monitora, do najbardziej wygodnej pozycji. Zalecamy przykrycie powierzchni stołu miękkim materiałem, aby zabezpieczyć monitor przed uszkodzeniem.
2.1.2 2-2 Demontaż podstawy 1. Odłacz kable zasialnia i sygnałowy. Ostrożnie połóż monitor ekranem w dół na czystym stole. 2. Palcami poluzuj wkręty znajdujące się w spodzie podstawy i zdemontuj podstawę ze stojaka. 3. Albo możesz użyć wkrętaka do odkręcenia wkrętów mocujących podstawę do monitora i odłącz podstawę od wspornika. • Zalecamy przykrycie powierzchni stołu miękkim materiałem, aby zabezpieczyć monitor przed uszkodzeniem. • Przytrzymaj podstawę podczas odkręcania śrub.
2.2 Regulacja monitora • Dla uzyskania optymalnego widzenia, zaleca się, aby spojrzeć na pełny ekran monitora, a następnie wyregulować monitor pod najbardziej wygodnym kątem. • Przytrzymaj podstawę, aby zabezpieczyć monitor przed upadkiem podczas zmiany jego kąta nachylenia. • Kąt nachylenia monitora, można regulować pod kątem -5° do 20°. -5 do +20 Podczas regulacji kąta widzenia monitor może lekko drgać, jest to normalne. 2.
VX239N/N-W DVI DVI VGA VGA DC-IN DVI • • VGA W celu podłączenia przewodu zasilającego: a. Podłącz zasilacz do wejścia DC monitora. b. Podłącz jeden koniec kabla zasilającego do zasilacza, a drugi koniec do gniazda elektrycznego. Aby podłączyć kabel VGA, HDMI/MHL, lub DVI: a. Podłącz jeden koniec kabla VGA, HDMI/MHL, lub DVI do gniazda VGA, HDMI/MHL, lub DVI monitora. b. Podłącz jeden koniec kabla VGA, HDMI/MHL lub DVI do gniazda VGA, HDMI/MHL lub DVI komputera. c.
2.4 Włączanie monitora Naciśnij przycisk zasilania . Lokalizację przycisku zasilania można sprawdzić w części 1.3.1 Widok z przodu. Po włączeniu monitora wskaźnik zasilania zacznie świecić białym światłem.
3.1 Menu OSD (menu ekranowe) 3.1.1 Jak wykonać ponowną konfigurację 1. 2. Naciśnij przycisk MENU, aby uaktywnić menu OSD. VX239 Tryb Sceneria Splendid Kolor Tryb Standardowy Obraz Tryb Teatr Wybór wejścia Tryb Gra Ustawienia systemu Tryb Widok nocny Naciśnij i w / celu przechodzenia pomiędzy funkcjami. Podświetl i uaktywnij wymaganą funkcję, naciskając przycisk MENU. Jeśli wybrana funkcja posiada podmenu, ponownie naciśnij i / w celu przechodzenia pomiędzy funkcjami podmenu.
W Tryb Standardowy, funkcje Nasycenie, Odcień skóry, Ostrość i ASCR nie są regulowane przez użytkownika. W Tryb sRGB, użytkownik nie może konfigurować funkcji Jasność, Kontrast, Nasycenie, Temp. barwowa, Odcień skóry, Ostrość, i ASCR. 2. Kolor Za pomocą tego menu można dostosować ustawienia Jasność, Kontrast, Nasycenie, Temp. barwowa, oraz Odcień skóry. • Jasność: Zakres regulacji wynosi 0 do 100. Przycisk jest także przyciskiem skrótu do uaktywniania tej funkcji.
• ASCR: Włączanie/wyłączanie funkcji ASCR (ASUS Smart Contrast Ratio) (Dostępny wyłącznie w Tryb Sceneria, Tryb Teatr, Tryb Gra, i Tryb Widok nocny). Pozycja: Regulacja pozycji poziomej (Pozycja pozioma) i pozycji pionowej (Pozycja pionowa) obrazu. Zakres regulacji wynosi od 0 do 100 (dostępna wyłącznie dla wejścia VGA). • • 4. Ostrość:Zmniejsza liniowe zakłócenia poziome i liniowe zakłócenia pionowe obrazu, poprzez oddzielną regulację (Faza) oraz (Zegar). Zakres regulacji wynosi 0 do 100.
• Głośność (dostępny tylko w modelach VX239H/H-W): Regulacja poziomu wyjścia głośności słuchawek. Zakres regulacji wynosi 0 do 100. • GamePlus: Uaktywnianie funkcji GamePlus. • ECO Mode: Uaktywnienie trybu ekologicznego w celu oszczędzania energii. (Po włączeniu trybu ECO, niektóre poziomy szarości mogą nie być rozpoznawane. Jasność jest niższa niż przy ustawieniu Współczynnik kontrastu na 100.
3.2 Podsumowanie danych technicznych VX239H/H-W Nazwa modelu TFT LCD Wielkość panelu 23” (16:9, 58 cm) - szeroki ekran Maks.
Nazwa modelu VX239H/H-W VX239N/N-W Dioda LED zasilania Biały (włączenie)/pomarańczowy (tryb gotowości) Nachylenie -5° ~ +20° Napięcie znamionowe Zasilacz 65 W DC 19 V 3,42 A 100~240 V przy 50/60 Hz Zasilacz 40 W DC 19 V 2,1 A 100~240 V przy 50/60 Hz Włączenie zasilania: 42W (maks.), Oczekiwanie: < 0,5 W przy 110~220 V AC Włączenie zasilania: 25W (maks.
3.3 Rozwiązywanie problemów (FAQ) Problem Możliwe rozwiązanie WŁĄCZONA dioda LED zasilania • Naciśnij przycisk , aby sprawdzić, czy monitor znajduje się w trybie WŁĄCZENIE. • Sprawdź, czy zasilacz i kabel zasilający są prawidłowo podłączone do monitora i gniazda elektrycznego. Pomarańczowe światło diody • Sprawdź, czy monitor i komputer są w trybie LED zasilania i brak obrazu na WŁĄCZENIE. ekranie • Sprawdź, czy kabel sygnałowy jest prawidłowo podłączony do monitora i komputera.
3.