Operation Manual

2-2 Chapter 2: Setup
2.3 Connecting the cables
1. Connect the cables as the following instructions:
VX24AH/VX249H
VX249N
VX24AQ
VX24AH/VX249H
VX249N
VX24AQ
VGA
HDMI/MHL
Earphone jackDisplayport
DVI
Audio-in
 :
a. Connect the power adapter securely to the monitor’s DC input port.
b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
 :
a. Plug one end of the VGA/DVI/HDMI/DisplayPort cable to the monitor’s
VGA/DVI/HDMI/DisplayPort port.
b. Connect the other end of the VGA/DVI/HDMI/DisplayPort cable to your
computer’s VGA/DVI/HDMI/DisplayPort port.
c. Tighten the two screws to secure the VGA/DVI connector.
 :connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
  connect the end with plug type to the monitor’s
earphone jack when an HDMI/DisplayPort signal is fed.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.