VX279-Serie LCD-Monitor Anwenderhandbuch
Erste Ausgabe August 2013 Copyright © 2013 ASUSTeK COMPUTER INC. Alle Rechte vorbehalten. Kein Teil dieses Handbuchs sowie keine hierin beschriebenen Produkte und Programme dürfen ohne ausdrückliche schriftliche Genehmigung von ASUSTeK COMPUTER INC. (ASUS) vervielfältigt, übertragen, abgeschrieben, in einem Archivsystem abgelegt, in irgendeiner Form oder mit irgendeinem Werkzeug übersetzt werden; ausgenommen hiervon sind Kopien des Käufers für Sicherungszwecke.
Inhalt Hinweise....................................................................................................... iv Sicherheitshinweise..................................................................................... v Pflege und Reinigung.................................................................................. vi Rücknahmeservices................................................................................... vii 1.1 Herzlich willkommen!...............................................
Hinweise FCC- (Federal Communications Commission-)Hinweis Dieses Gerät erfüllt Teil 15 der FCC-Bestimmungen. Der Betrieb unterliegt den folgenden zwei Voraussetzungen: • Dieses Gerät darf keine Störungen verursachen. • Dieses Gerät muss jegliche empfangenen Störungen hinnehmen, einschließlich Störungen, die zu unbeabsichtigem Betrieb führen können. Dieses Gerät wurde getestet und als mit den Grenzwerten für Digitalgeräte der Klasse B gemäß Teil 15 der FCC-Bestimmungen übereinstimmend befunden.
Sicherheitshinweise • Es empfiehlt sich, vor dem Aufstellen des Monitors die mitgelieferte Dokumentation aufmerksam durchzulesen. • Um Brände oder einen Stromschlag zu verhindern, darf der Monitor nicht Regen oder Feuchtigkeit ausgesetzt werden. • Versuchen Sie nicht, das Monitorgehäuse zu öffnen. Die gefährliche Hochspannung im Geräteinnern kann zu schweren Verletzungen führen. • Versuchen Sie nicht, das Netzteil selbst zu reparieren.
Pflege und Reinigung • Vor Hochheben oder Versetzen des Monitors sollten sämtliche Kabel herausgezogen werden. Halten Sie sich beim Aufstellen des Monitors an die Hinweise zum Anheben des Geräts. Fassen Sie das Gerät beim Heben oder Tragen an den Kanten, nicht am Fuß oder am Kabel. • Reinigung: Schalten Sie den Monitor aus und ziehen Sie das Stromkabel heraus. Reinigen Sie die Oberfläche mit einem fusselfreien, weichen Tuch.
Weitere Informationsquellen Folgende Informationsquellen liefern weitere Hinweise sowie Updates für Produkte und Software: 1. ASUS-Internetseiten Die weltweiten ASUS-Internetseiten bieten aktualisierte Informationen zu ASUS-Hardware- und Softwareprodukten. Die allgemeine WebSite: http://www.asus.com 2. Optionale Dokumentation Ihr Paket beinhaltet möglicherweise eine optionale Dokumentation, die von Ihrem Händler ergänzt wurde. Diese Dokumente sind nicht Teil des Standardlieferumfangs.
1.1 Herzlich willkommen! Vielen Dank, dass Sie den ASUS® LCD-Monitor gekauft haben! Dieser neueste Widescreen LCD-Monitor von ASUS verfügt über ein schärferes, breiteres und helleres Display als seine Vorgänger plus eine Reihe von Funktionen, die das Arbeiten mit dem Gerät noch angenehmer und die Darstellung noch natürlicher machen. Diese Funktionen sorgen für die optimale, augenfreundliche und brillante Bildwiedergabe des Monitors! 1.
1.3 Einführung 1.3.1 Vorderansicht VX279Q / H 4 6 7 4 2 7 VX279N 1. Taste • 2. 3. Aktiviert die QuickFit-Funktion. (Bitte beachten Sie 1.3.3 QuickFit-Funktion). Taste , , : • Mit dieser Schnelltaste schalten Sie zwischen sechs Videovorgabemodi (Landschaftsmodus, Standardmodus, Theatermodus, Spielmodus, Nachtmodus und sRGB-Modus) mit SPLENDID™-Videotechnologie um. • Mit dieser Taste beenden Sie überdies das OSD-Menü oder kehren bei aktivem Menü zum vorherigen Menü zurück.
4. Taste MENU (Menü): • Aktiviert das Bildschirmmenü. • Führt das ausgewählte Bildschirmmenüelement aus. • Zum Aktivieren der Tastensperre halten Sie diese Taste 5 Sekunden lang gedrückt. Zum Abschalten der Funktion halten Sie die Taste noch einmal 5 Sekunden lang gedrückt. 5. 6. Taste : • Erhöht den Wert oder bewegt Ihre Auswahl nach rechts/oben. • Helligkeit-Schnelltaste Taste • für Eingangsauswahl: Wählt eine verfügbare Eingangsquelle (nur bei VX279Q/HModellen verfügbar).
1.3.2 Rückansicht VX279Q HDMI / MHL HDMI / MHL VGA VGA 7 1 2 3 4 5 6 VX279H HDMI / MHL-1 HDMI / MHL-1 HDMI / MHL-2 HDMI / MHL-2 VGA VGA 4 6 VX279N DVI DVI VGA 8 2 VGA 5 6 1-4 1. HDMI/MHL-Port: Dieser Port dient der Verbindung mit einem HDMI/ MHL-kompatiblen Gerät. 2. VGA-Port: Dieser 15-polige Port dient der PC-VGA-Verbindung. 3. Audioeingang: Dieser Port verbindet die PC-Audioquelle über das mitgelieferte Audiokabel. 4.
1.3.3 QuickFit-Funktion Die QuickFit-Funktion ermöglicht Benutzern eine Vorschau des Dokumentoder Fotolayouts direkt am Bildschirm, ohne Testkopien drucken zu müssen. Drücken Sie zum Aktivieren: a. Raster: Unterstützt Entwickler und Anwender beim Organisieren von Inhalten und Layout einer Seite, sorgt für einen konsistenten Eindruck. Alignment Grid EXIT b. Seitengröße: Ermöglicht die Anzeige von Dokumenten in realer Größe. A4 Letter EXIT c.
1.3.4 GamePlus-Funktion Die GamePlus-Funktion sorgt für eine perfekte Spielerfahrung bei unterschiedlichsten Spielen. Zusätzlich gibt es die Aimpoint-Funktion, die insbesondere Anfängern bei der Bewältigung von Egoshootern anfangs etwas unter die Arme greift. So aktivieren Sie GamePlus: 1. Blenden Sie das OSD-Menü mit der MENU-Taste ein. 2. Wählen Sie System-Einstellungen mit den Tasten / / , wechseln Sie dann mit der MENU-Taste in das VX279 Systemeinstellungen-Untermenü. Splendid GamePlus 3.
2.1 Zusammenbau des Monitorfußes 2.1.1 Basis montieren 1. Legen Sie den Monitor mit der Vorderseite nach vorne auf einen Tisch. 2. Befestigen Sie den Fuß am Schwenkarm und drehen Sie die Schraube fest. Sie lässt sich problemlos von Hand festziehen. 3. Stellen Sie einen für Sie bequemen Neigungswinkel ein. Um Schäden am Monitor zu verhindern, sollte der Tisch mit einem weichen Tuch bedeckt werden.
2.1.2 2-2 Basis abnehmen 1. Trennen Sie Stromversorgungs- und Signalkabel. Legen Sie den Monitor mit der Bildfläche nach unten vorsichtig auf einen sauberen Tisch. 2. Lösen Sie die Schraube am Boden der Basis mit den Fingern, nehmen Sie dann die Basis vom Ständer ab. 3. Alternativ können Sie auch gleich die Schraube, welche die Basis am Ständer fixiert, mit einem Schraubendreher lösen und die Basis dann vom Ständer abnehmen.
2.2 Einstellen des Monitors • Für eine optimale Draufsicht sollten Sie direkt auf das Display schauen und dabei den Neigungswinkel des Monitors so einstellen, dass Sie das Display bequehm ansehen können. • Halten Sie während des Einstellens des Winkels den Monitorfuß fest. • Möglich sind Neigungswinkel zwischen -5˚ und 20˚. -5 to bis+20 +20 -5  Es ist normal, dass der Monitor leicht wackelt, während Sie den Betrachtungswinkel anpassen. 2.
VX279Q HDMI / MHL HDMI / MHL VGA VGA HDMI / MHL Audio-in DisplayPort VGA DC-IN Earphone jack VX279N DVI DVI VGA VGA DC-IN DVI • • • 2-4 VGA So schließen Sie das Netzkabel an: a. Verbinden Sie das Netzteil mit dem Netzeingang des Monitors. b. Schließen Sie ein Ende des Netzkabels am Netzteil und das andere Ende an eine Steckdose an. So schließen Sie das VGA-, HDMI/MHL- oder DisplayPort-Kabel an: a.
• So verwenden Sie Kopfhörer: a. Wenn Sie ein HDMI/MHL- oder DisplayPort-Kabel verwenden, verbinden Sie den kleinen, runden Stecker mit dem Kopfhöreranschluss des Monitors. b. Wenn VGA- und Audio-Line-In-Kabel angeschlossen werden, verbinden Sie den kleinen, runden Stecker mit dem Kopfhöreranschluss des Monitors. Wenn mehrere Videosignalkabel angeschlossen sind, können Sie das Eingangsauswahl-Taste bzw. gewünschte Signal durch Betätigung der über das Eingangswahl im Bildschirmmenü wählen. 2.
3.1 OSD-(On-Screen Display-)Menü 3.1.1 Konfiguration 1. Aktivieren Sie das OSD-Menü mit der Taste MENU (Menü). Landschaftsmodus Farbe Standardmodus 2. Bildeinrichtung Theatermodus Steuern Sie mit / Eingangswahl Spielmodus und durch die einzelnen System-Einstellungen Nachtmodus Funktionen. Drücken Sie erneut sRGBmodus die Taste MENU zum Markieren Move Menu Exit und Aktivieren der gewünschten Funktion.
 Im Standardmodus können die Funktionen Sättigung, Hautton, Schärfe und ASCR nicht vom Benutzer eingestellt werden. Im sRGBmodus können die Funktionen Helligkeit, Kontrast, Sättigung, Farbtemperatur, Hautton, Schärfe und ASCR nicht vom Benutzer eingestellt werden. 2. Farbe Über dieses Menü können Sie Helligkeit, Kontrast, Sättigung, Farbtemperatur und Hautton einstellen. • Helligkeit: Möglich sind Werte zwischen 0 und 100. Zum Aktivieren dieser als Funktion dient Schnelltaste.
• Fokus: Verringert vertikales und horizontales Zeilenrauschen; hierbei werden Phase und Takt getrennt eingestellt. Möglich sind Werte zwischen 0 und 100.  4. • Phase passt die Phase des Pixeltaktsignals an. Mit einer falschen Phaseneinstellung erscheinen horizontale Störungen am Bildschirm. • Takt (Pixelfrequenz) kontrolliert die Anzahl der bei einem horizontalen Durchlauf gescannten Pixel.
• • • • Sprache: Wählen Sie die Sprache des Bildschirmmenüs. möglich sind Englisch, Französisch, Deutsch, Spanisch, Italienisch, Holländisch, Russisch, traditionelles und vereinfachtes Chinesisch sowie Japanisch. Tastensperre: Schaltet die Tastensperre ein und aus. Information: Rufen Sie Monitorinformationen zu Eingang, Auflösung, horizontaler Frequenz, vertikaler Frequenz und Modellnamen auf. Fabrikeinstellungen: Mit "Ja" werden alle Einstellungen auf die werksseitigen Standardvorgaben zurückgesetzt.
3.2 Übersicht über die technischen Daten VX279H Modellname VX279N TFT-LCD Display-Größe 27 Zoll-Breitbildschirm (16:9, 68,6 cm) Max. Auflösung 1920 x 1080 Helligkeit (typ.) 250 cd/m2 (Bildmitte, typisch) Kontrastverhältnis (typ.) 1000:1 (typisch) ASUS Smart Contrast Ratio (ASCR) ≥ 80.000.
VX279 H / Q / N Modellname Spannung (VX279H/Q) 65 W; Netzteil: 19 V Gleichspannung, 3,42 A; 100 – 240 V~, 50/60 Hz Spannung (VX279N) 40 W; Netzteil: 19 V Gleichspannung, 2,10A; 100 – 240 V~, 50/60 Hz Eingeschaltet: 46 W (maximal) Stromverbrauch (VX279H/Q) Bereitschaft: < 0,5 W bei 110 – 220 V Wechselspannung Abgeschaltet: < 0,5 W bei 110 – 220 V Wechselspannung Eingeschaltet: 32,5 W (maximal) Stromverbrauch (VX279N) Bereitschaft: < 0,5 W bei 110 – 220 V Wechselspannung Abgeschaltet: < 0,5 W bei 110
3.3 Problembeseitigung (FAQ) Problem Lösungsvorschlag Strom-LED leuchtet NICHT • Drücken Sie , um festzustellen, ob der Monitor eingeschaltet ist. • Prüfen Sie, ob Netzteil und Netzkabel richtig an Monitor und Steckdose angeschlossen sind. Die Strom-LED leuchtet • Überprüfen Sie, ob PC und Monitor eingeschaltet bernsteinfarben, doch auf dem sind. Display ist nichts zu sehen. • Überprüfen Sie, ob das Signalkabel ordnungsgemäß am Monitor und am PC eingesteckt ist.
3.