User Guide

3-6
Chapter 3: General Instruction
4. Image
YoucanadjusttheimageSharpness,TraceFree,AspectControl,
ASCR,MotionSync,Adaptive-Sync,Position(VGAonly),Focus(VGA
only),andAutoAdjust(VGAonly),fromthismainfunction.
VY229HF
1920 x 1080 100 Hz
Splendid
Standard Mode
Signal
HDMI
Brightness
65
Splendid
EyeCare
Image
Signal
Back/Exit Enter
Color
Aspect Control
Sharpness
Adaptive-Sync
ASCR
Motion Sync
Position
Focus
Trace Free
60
0
• Sharpness:Adjuststhepicturesharpness.Theadjustingrangeisfrom
0to100.
• Trace Free:SpeedsuptheresponsetimebyOverDrivetechnology.The
adjustingrangeisfromlower0tofaster100.
• Aspect Control:Adjuststheaspectratioto“Full”,“1:1 Ratio”.
• ASCR: Select ON or OFFtoenableordisabledynamiccontrastratio
function.
• Motion Sync: Checktodecreasemotionblurandminimizeghostingpart
whenon-screenobjectsarefastmoving.Whenthisfunctionisturnedon,
thescreenmayflashslightlyandthebrightnesswilldecrease.
• Adaptive-Sync:ItcanallowaAdaptive-Syncsupportedgraphicssource
todynamicallyadjustdisplayrefreshratebasedontypicalcontentframe
ratesforpowerefficient,virtuallystutterfreeandlow-latencydisplay
update.
• Position (VGA only)：Adjuststhehorizontalposition(H-Position)and
theverticalposition(V-Position)oftheimage.Theadjustingrangeisfrom
0to100(OnlyavailableforVGAinput).
• Focus (VGA only)：Reduces Horizonal-line noise and Vertical-line noise
oftheimagebyadjusting(Phase)and(Clock)separately.Theadjusting
rangeisfrom0to100(OnlyavailableforVGAinput).
• Auto Adjust (VGA only)：Automaticallyadjusttheimagetoits
optimizedposition,clock,andphase.(OnlyavailableforVGAinput.)