User Guide

2-1
Chapter 2: Setup
2.1 Assembling the monitor arm/base
Toassemblethemonitorbase:
1. CarefullyplacethemonitorontheEPSfoam,withthescreenfacing
down.
2. Attachthebasetothearm.
3. Liftthescrewringandturnitclockwisetosecurethebase.
4. Removethestandcover.
5. Placethearmhingeofthethestandassemblyontoitscompartment
ontherearofthemonitor.ThenusetheL-shapedscrewdriverto
secureitwithfourscrews.
6. Installthestandcovertotherearofthemonitor.
Basescrewsize:M6x12mm.
Hingescrewsize:M4x10mm.