Řada VY279 LCD monitor Uživatelská příručka
Obsah Upozornění................................................................................................... iii Péče a údržba................................................................................................ v 1.1 Vítejte!............................................................................................ 1-1 1.2 Obsah balení.................................................................................. 1-1 1.3 Sestavení monitoru.........................................
Upozornění Prohlášení pro Federální komunikační komisi Toto zařízení vyhovuje části 15 předpisů FCC. Provoz vyžaduje splnění následujících dvou podmínek: • Toto zařízení nesmí způsobovat škodlivé rušení, a • Toto zařízení musí přijmout veškeré přijaté rušení, včetně rušení, které by mohlo způsobit nežádoucí činnost. Toto zařízení bylo testováno a bylo shledáno, že vyhovuje omezením pro digitální zařízení třídy B, dle části 15 pravidel Federální komunikační komise (FCC).
Bezpečnostní informace iv • Před přípravou monitoru k použití si pečlivě přečtěte veškerou dodávanou dokumentaci. • Aby nedošlo k požáru nebo zásahu elektrickým proudem, nevystavujte monitor dešti ani vlhkosti. • Nepokoušejte se rozebírat kryt monitoru. Uvnitř je vysoké napětí, které by mohlo způsobit úraz. • Při poruše napájecího zdroje se jej nepokoušejte opravovat. Obraťte se na kvalifikovaného servisního technika nebo prodejce.
VAROVÁNÍ Používáním jiných než určených extraaurálních nebo intraaurálních sluchátek může dojít ke ztrátě sluchu způsobené nadměrným hlukem. Ujistěte se, že rozvodová síť budovy obsahuje jistič 120/240 V, 20 A (maximálně). Pokud je napájecí kabel opatřen tříkolíkovou zástrčkou, zapojte kabel do uzemněné tříkolíkové zásuvky. Nebraňte ve funkčnosti uzemňovacího kolíku na zástrčce, například použitím dvoukolíkového adaptéru. Uzemňovací kolík je důležitým bezpečnostním prvkem.
DŮLEŽITÉ: Pokyny, které MUSÍTE přesně dodržet. POZNÁMKA: Další informace a tipy pomáhající při činnosti. Kde najdete další informace Další informace a aktualizace produktu a softwaru jsou dostupné z níže uvedených zdrojů. vi 1. Web ASUS Celosvětový web ASUS nabízí aktualizované informace o hardwaru a softwaru ASUS. Viz http://www.asus.com 2. Volitelná dokumentace S produktem může být dodávána volitelná dokumentace, poskytovaná prodejcem. Tyto dokumenty nejsou standardní součástí balení.
1.1 Vítejte! Děkujeme, že jste zakoupili LCD monitor ASUS®! Nejnovější širokoúhlý LCD monitor firmy ASUS poskytuje čistší, širší a jasnější zobrazení a navíc řadu funkcí zlepšujících váš zážitek z obrazu. Díky bohaté nabídce funkcí si můžete vychutnat pohodlí a krásné zobrazení, kterým se tento monitor vyznačuje! 1.
1.3 Sestavení monitoru Pokyny pro sestavení monitoru: 1. Položte monitor obrazovkou na stůl potažený látkou. Poté upevněte podstavec na rameno a pevně spojte šroubem. Šrouby lze snadno dotáhnout jen prsty. 2. Nastavte sklon monitoru, který vám nejvíce vyhovuje. 2 4 -5 ~ 23 1 3 1.
1.5 Připojení kabelů 1.5.1 Zadní strana LCD monitoru 5 1 1. Port AC-IN 2. Port HDMI 3. Port VGA 4. Výstupní port pro sluchátka 5.
Instalace 1. Vypněte počítač a odpojte jeho napájecí kabel. 2. Připojte kabel signálu k zásuvce vstupu HDMI (volitelně) a/nebo VGA (volitelně) monitoru a k zásuvce výstupu HDMI (volitelně) a/ nebo VGA (volitelně) grafické karty počítače. Potom utáhněte ruční šroubky na konektoru kabelu signálu. 3. Zasuňte napájecí kabel monitoru do napájecího portu na zadní straně monitoru. 4. Připojte napájecí kabely počítače a monitoru do nejbližší elektrické zásuvky.
• Technické údaje NAPÁJECÍHO KABELU jsou uvedeny na stránce v. • Pokyny pro instalaci náhradních dílů jsou uvedeny ve výše uvedené části. • Uživatelé mohou požádat o výměnu/zakoupit kompatibilní náhradní díly v místní servisní síti. • Kontaktní údaje místních servisních středisek jsou k dispozici na adrese https://www.asus.
1.6 Představení monitoru 1.6.1 Používání ovládacího tlačítka Ovládací tlačítko na zadní straně monitoru slouží k úpravám nastavení obrazu. 2 5 Signál → 4 3 Napájení Zavřít Jas 6 1. • 2. 5. 6. Popis Bílá ZAPNUTO Oranžová Režim připravenosti VYPNUTO VYPNUTO Stiskem tlačítka otevřete menu OSD. Ukončí nabídku OSD a vrátí se na předchozí úroveň. Tlačítko vpravo: • Klávesová zkratka pro vypnutí. • Otevření možnosti v další úrovni. Tlačítko nahoru: • Klávesová zkratka signálu.
2.1 Odpojení ramena/stojanu (pro upevnění na stěnu VESA) Odnímatelný stojan monitoru je speciálně navržen pro upevnění na stěnu VESA. Odpojení ramena/stojanu 1. Odpojte napájecí a signálové kabely. Opatrně položte monitor přední stranou na čistý stůl. 2. Prsty sejměte kryt závěsu z těla monitoru. 3. Pomocí šroubováku demontujte šrouby ramena a poté oddělte rameno/stojan od monitoru. • Doporučujeme položit na stůl měkký hadr, aby se monitor nepoškodil.
2.2 Nastavení monitoru • V zájmu optimálního pozorování doporučujeme podívat se tak, abyste viděli celou plochu monitoru, a pak nastavit sklon, který vám nejvíc vyhovuje. • Při nastavování sklonu držte stojan, aby monitor nespadl. • Sklon monitoru můžete nastavit v rozmezí +23˚ až -5˚. -5 ~ 23 Je normální, že se monitor při nastavování úhlu mírně třese.
3.1 Nabídka OSD (On-Screen Display) 3.1.1 Změna konfigurace VY279HE 1080p Splendid EyeCare Barva Obraz 60 Hz Splendid Standardní režim Signál HDMI Jas 100 Standardní režim Režim sRGB Režim Krajina Režim Divadlo Režim Hra Režim Noční záběr Režim Čtení Režim Tmavá Místnost Signál Back/Exit Enter 1. Stisknutím tlačítka Nabídka otevřete nabídku OSD. 2. Stisknutím tlačítek a můžete přepínat mezi volbami v nabídce. Při přechodu z jedné ikony na jinou je zvýrazněn název volby. 3.
3.1.2 1. Představení funkcí OSD Splendid Tato funkce nabízí osm dílčích funkcí, které vybíráte podle toho, co se vám líbí. VY279HE 1080p Splendid EyeCare Barva Obraz 60 Hz Splendid Standardní režim Signál HDMI Jas 100 Standardní režim Režim sRGB Režim Krajina Režim Divadlo Režim Hra Režim Noční záběr Režim Čtení Režim Tmavá Místnost Signál Back/Exit 3-2 Enter • Standardní režim: Nejlepší volba pro úpravu dokumentů s technologií optimalizace videa SPLENDID™ Video Intelligence Technology.
2. EyeCare Upravte úroveň energie z podsvícení LED pomocí funkce Péče o zrak. VY279HE 1080p Splendid EyeCare 60 Hz Splendid Standardní režim Signál HDMI Jas 100 Filtr Modrého Světla Připomínka odpočinku VYPNUTO Vylepšení barev EyeCheck Barva Obraz Signál Back/Exit • • Filtr Modrého Světla: Tato funkce umožňuje upravit filtr modrého světla od 0 po maximum. 0: žádná změna; maximum: Čím vyšší úroveň, tím méně modrého světla je vyzařováno.
• EyeCheck: Funkce EyeCheck nabízí tři testovací obrazce: (1) Snellenovu tabuli, (2) Amslerovu mřížku a (3) Astigmatismus. 1. Snellen Chart (Snellenova tabule) P1 P2 P3 2. Amsler Grid (Amslerova mřížka) Při pohledu zaměřeném na středa mřížky zkontrolujte, že jsou všechny čáry rovné. 3. Astigmatism (Astigmatismus) Zkontrolujte, že mají všechny čáry stejnou šířku.
Pro uvolnění zatížení zraku dodržujte následující zásady: • Během vícehodinového používání displeje musí uživatelé dělat přestávky. Doporučujeme provádět krátké přestávky (alespoň 5 minut) přibližně po každé 1 hodině souvislé práce. Častější kratší přestávky jsou účinnější, než jedna dlouhá. • Aby se minimalizovala zátěž zraku a vysoušení vašich očí, musí uživatelé pravidelně uvolňovat zrak tím, že budou pravidelně zaostřovat na vzdálené objekty. • Cvičení s očima může přispět k omezení únavy zraku.
3. Barva Tato funkce umožňuje nastavit barvu obrazu. VY279HE 1080p Splendid EyeCare Barva Jas Splendid Standardní režim 60 Hz Signál HDMI Jas 100 100 Kontrast 80 Sytost 50 Teplota barev Pleťový tón Obraz Signál Back/Exit • Jas: Rozsah nastavení je 0 až 100. • Kontrast: Rozsah nastavení je 0 až 100. • Sytost: Rozsah nastavení je 0 až 100. • Teplota barev: Obsahuje tři přednastavené barevné režimy (Studené, Normální, Teplé) a Uživatelský režim.
4. Obraz Z této hlavní funkce lze upravovat nastavení Ostrost, Trace Free, Nastavení poměru stran, VividPixel, ASCR, Synchronizace pohybu, AMD FreeSync, Shadow Boost, Pozice (pouze VGA), Zaostření (pouze VGA) a AUTO nast. (pouze VGA).
3-8 • Zaostření (pouze VGA): Samostatné omezení šumu vodorovných čar a svislých čar pomocí nastavení Phase (fáze) a Clock (Frekvence). Rozsah nastavení je 0 až 100 (k dispozici jen pro režim VGA). • AUTO nast. (pouze VGA): Automatické seřízení optimální pozice obrazu, frekvence a fáze. (K dispozici pouze pro vstup VGA.) • Možnost 4:3 je k dispozici pouze pro vstupní zdroj formátu 4:3. • Fáze je nastavení fáze bodového kmitočtu.
5. Signál Vyberte vstupní signál z možností VGA, HDMI. VY279HE 1080p Splendid Splendid Standardní režim 60 Hz Signál HDMI Jas 100 VGA HDMI EyeCare Barva Obraz Signál Back/Exit 6. Enter Nastavení Nastavení konfigurace systému.
Hlavní nabídka GamePlus GamePlusVlasový kříž GamePlusČasovač 90 GamePlusPočítadlo FPS • QuickFit: obsahuje tři vzory: (1) Mřížka (2) Velikost papíru (3) Velikost fotografie. 1. Vzorek mřížky: Usnadňuje grafikům i běžným uživatelům uspořádání prvků na jedné stránce, aby se dosáhlo konzistentního vzhledu a dojmu.
2. Velikost papíru: Umožňuje uživatelům zobrazit dokumenty ve skutečné velikosti na obrazovce. A4 B5 Letter A4 B5 Letter EXIT 3. EXIT EXIT Velikost fotografie: Umožňuje fotografům a dalším uživatelům přesně zobrazit a upravovat fotografie ve skutečné velikosti na obrazovce. 8x10 5x7 4x6 3x5 2x2 • ECO Mode: Aktivujte úsporný režim pro úsporu energie. • Nastavení OSD: Slouží k úpravám nastavení Časový interval OSD, DDC/CI a Průhlednost obrazovky OSD. • Jazyk: Výběr jazyka OSD.
7. Zástupce Výběrem této volby můžete nastavit dvě tlačítka zástupců. VY279HE 1080p Nastavení 60 Hz Splendid Standardní režim Signál HDMI Jas 100 Zástupce 1 Zástupce 2 Zástupce Back/Exit 3-12 Enter • Zástupce 1: Jako zástupce může uživatel vybrat a nastavit funkce „Filtr Modrého Světla“, „Splendid“, „Jas“, „AUTO nast.“, „Kontrast“, „Signál“, „Teplota barev“, „Hlasitost“, „GamePlus“, „QuickFit“, „Připomínka odpočinku“, „Vylepšení barev“ nebo „EyeCheck“. Výchozí nastavení je výběr vstupu.
3.2 Specifikace Model VY279HE Velikost panelu 27” W Max. rozlišení 1920 x 1080 při 75 Hz Jas (typ.) Intrinsický kontrastní poměr (typ.
3.3 Řešení potíží (FAQ) Problém LED kontrolka napájení nesvítí Možné řešení • Stisknutím tlačítka ověřte, zda je monitor zapnutý. • Zkontrolujte, zda je dobře zapojen napájecí kabel mezi monitor a zásuvku elektrické sítě. • Zkontrolujte funkci indikátoru napájení v hlavní nabídce OSD. Výběrem „ZAPNUTO“ zapnete indikátor LED napájení. Kontrolka napájení svítí oranžově • Ověřte, zda je monitor a počítač zapnutý.
3.
Frekvence SD/HD Formáty HDMI 1.4, CEA-861B, podporované primární frekvence SD/HD (pouze vstup HDMI) Rozlišení Obnovovací kmitočet Řádkový kmitočet 640 x 480 P 720 x 480 P 720 x 576 P 1280 x 720 P 1280 x 720 P 59,94/60 Hz 59,94/60 Hz 50Hz 50Hz 59,94/60 Hz 31,469/31,5kHz 31,469/31,5kHz 31,25kHz 37,5kHz 44,955/45kHz Formáty HDMI 1.