VZ229-Serie LCD-Monitor Anwenderhandbuch
Erste Ausgabe Januar 2017 Copyright © 2017 ASUSTeK COMPUTER INC. Alle Rechte vorbehalten. Kein Teil dieses Handbuchs sowie keine hierin beschriebenen Produkte und Programme dürfen ohne ausdrückliche schriftliche Genehmigung von ASUSTeK COMPUTER INC. (ASUS) vervielfältigt, übertragen, abgeschrieben, in einem Archivsystem abgelegt, in irgendeiner Form oder mit irgendeinem Werkzeug übersetzt werden; ausgenommen hiervon sind Kopien des Käufers für Sicherungszwecke.
Inhalt Notices.......................................................................................................... iv Sicherheitshinweise..................................................................................... v Pflege und Reinigung.................................................................................. vi Rücknahmedienste..................................................................................... vii 1.1 Herzlich willkommen!............................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Sicherheitshinweise • • • • • • • • • • • • • • • • Es empfiehlt sich, vor dem Aufstellen des Monitors die mitgelieferte Dokumentation aufmerksam durchzulesen. Um Brände oder einen Stromschlag zu verhindern, darf der Monitor nicht Regen oder Feuchtigkeit ausgesetzt werden. Versuchen Sie nicht, das Monitorgehäuse zu öffnen. Die gefährliche Hochspannung im Geräteinnern kann zu schweren Verletzungen führen. Versuchen Sie nicht, das Netzteil selbst zu reparieren.
Pflege und Reinigung • Vor Hochheben oder Versetzen des Monitors sollten sämtliche Kabel herausgezogen werden. Halten Sie sich beim Aufstellen des Monitors an die Hinweise zum Anheben des Geräts. Fassen Sie das Gerät beim Heben oder Tragen an den Kanten, nicht am Fuß oder am Kabel an. • Reinigung: Schalten Sie den Monitor aus und ziehen Sie das Stromkabel heraus. Reinigen Sie die Oberfläche mit einem fusselfreien, weichen Tuch.
Weitere Informationsquellen Folgende Informationsquellen liefern weitere Hinweise sowie Updates für Produkte und Software: 1. ASUS-Websites Die Websites des Unternehmens für die einzelnen Länder liefern aktualisierte Informationen über Hardware und Software von ASUS. Die allgemeine Website: http://www.asus.com 2. Optionale Dokumentation Das Gerätepaket enthält u. U. eine vom Händler beigelegte Zusatzdokumentation. Diese ist nicht Teil des Standardpakets.
1.1 Herzlich willkommen! Wir bedanken uns, dass Sie einen ASUS® LCD-Monitor gekauft haben! Dieser neueste Widescreen-LCD-Monitor von ASUS verfügt über ein schärferes, breiteres und helleres Display als seine Vorgänger, plus eine Reihe von Funktionen, die das Arbeiten mit dem Gerät noch angenehmer und die Darstellung noch natürlicher machen. Diese Funktionen sorgen für optimale, augenfreundliche und brillante Bildwiedergabe am Monitor! 1.
1.3 Monitorbasis montieren 1. Legen Sie den Monitor mit der Bildfläche nach unten auf einen Tisch. 2. Bringen Sie den Fuß am Arm an. 3. Drehen Sie die Schraube zur Befestigung des Fußes im Uhrzeigersinn. Stellen Sie dann einen für Sie angenehmen Neigungswinkel ein. •• 1-2 Um Schäden am Monitor zu verhindern, sollte der Tisch mit einem weichen Tuch bedeckt werden.
1.4 Kabel anschließen 1.4.1 Rückseite des LCD-Monitors 1 HDMI VGA HDMI 2 2 3 1 HDMI VGA 4 5 6 7 VZ229H VGA 3 HDMI VGA 4 5 7 VZ229HE DVI VGA 2 3 DVI 8 VGA 5 7 VZ229N 1. Lautsprecher 5. VGA-Anschluss 2. Bedientasten 6. Audioeingang 3. Kensington-Schloss 7. Gleichstromeingang 4. HDMI-Anschluss 8.
1.5 Übersicht über den Monitor 1.5.1 Bedientasten verwenden Passen Sie die Bildeinstellungen mit den Bedientasten an der Unterseite des Monitors an. Drücken Sie die Tasten 1 bis 6 zum Einblenden der Tastenlistenseite. Menü Menü Schließen Schließen Eingangswahl Auto QuickFit Helligkeit Helligkeit GamePlus Blaulichtfilter Blaulichtfilter 1 2 3 4 5 6 1 2 3 4 5 6 7 VZ229H/VZ229HE 1. 1 2 3 4 5 6 1 2 3 4 5 6 7 VZ229N Schnelltaste 2: • 2. Dies ist eine Schnelltaste.
4. Eingangstaste (nur bei Modell VZ229H/VZ229HE): Schaltet die Eingangsquelle um. Auto-Einstellung (nur bei Modell VZ229N): Führt die automatische Anpassung durch (nur bei VGA-Eingang verfügbar). 5. Schließen-Taste: • 6. Schließt das OSD-Menü. Menütaste: • 7. Ruft das OSD-Menü auf. Ein-/Austaste / Betriebsanzeige: • Taste zum Ein- und Ausschalten des Monitors.
1.5.2 QuickFit-Funktion Die QuickFit-Funktion verfügt über zwei Muster: (1) Muster (2) Fotogröße. 1. Gittermuster: Vereinfacht Designern und Nutzern das Organisieren von Inhalten und Layout auf einer Seite und die Erzielung eines einheitlichen Aussehens und Gefühls. Alignment Grid 2. Fotogröße: Ermöglicht Fotografen und anderen Nutzern die exakte Anzeige und Bearbeitung ihrer Fotos in realer Größe am Bildschirm.
2.1 Monitor anpassen • Für eine optimale Sicht sollten Sie direkt auf das Display schauen und dabei den Neigungswinkel des Monitors so einstellen, dass Sie das Display bequem ansehen können. • Halten Sie während der Winkeleinstellung den Monitorständer fest. • Möglich sind Neigungswinkel zwischen -5˚ und 22˚. -5˚-5˚ und to +22˚ •• Es ist normal, dass der Monitor leicht wackelt, während Sie den Betrachtungswinkel anpassen.
3.1 Bildschirmmenü (On-Screen Display) 3.1.1 Neu konfigurieren Splendid VZ229 Standardmodus VGA 1920 x 1080 @ 60Hz Landschaftsmodus Standardmodus Theatermodus Spielmodus Nachtmodus sRGBmodus Lesemodus Dunkelkammer-Modus 3-1 1. Blenden Sie das Bildschirmmenü mit der Menü-Taste ein. 2. Drücken Sie zum Umschalten zwischen den Menüoptionen die Tasten und . Während Sie von einem Symbol zum nächsten navigieren, wird der jeweilige Optionsname hervorgehoben. 3.
3.1.2 1. OSD-Funktionen: Einführung Splendid Diese Funktion enthält 8 Optionen, die Sie nach Bedarf einstellen können. Alle Modi verfügen über eine Funktion zum Zurücksetzen, d. h., Sie können die Einstellung beibehalten oder zum vordefinierten Modus zurückkehren.
• • • 2. Im Standardmodus können die Funktionen Sättigung, Hautton, Schärfe und ASCR nicht vom Nutzer konfiguriert werden. Im sRGBmodus können die Funktionen Sättigung, Farbtemp., Hautton, Schärfe, Helligkeit, Kontrast und ASCR nicht vom Nutzer konfiguriert werden. Im Lesemodus können die Funktionen Sättigung, Hautton, ASCR, Kontrast und Farbtemp. nicht vom Nutzer konfiguriert werden. Blaulichtfilter Verringert die Intensität des von der LED-Hintergrundbeleuchtung abgestrahlten blauen Lichts.
3. Farbe Mit dieser Funktion wählen Sie die gewünschte Bildfarbe. Farbe VZ229 Standardmodus VGA 1920 x 1080 @ 60Hz Helligkeit Kontrast Sättigung Farbtemp. Hautton • Helligkeit: Zum Anpassen der Helligkeit. Möglich sind Werte zwischen 0 und 100. • Kontrast: Zum Anpassen des Kontrasts. Möglich sind Werte zwischen 0 und 100. • Sättigung: Zum Anpassen der Sättigung. Möglich sind Werte zwischen 0 und 100. • Farbtemp.: Wählen Sie die gewünschte Farbtemperatur.
4. Bildeinrichtung Über diese Hauptfunktion können Sie Schärfe, Trace Free, Kontrollen, VividPixel, ASCR, Position, Fokus und Auto-Einstellung anpassen. Bildeinrichtung VZ229 Standardmodus VGA 1920 x 1080 @ 60Hz Schärfe Trace Free Kontrollen VividPixel ASCR Position Fokus Auto-Einstellung • Schärfe: Zum Einstellen der Bildschärfe. Möglich sind Werte zwischen 0 und 100. • Trace Free: Zur Beschleunigung der Reaktionszeit per Overdrive-Technologie. Möglich sind Werte zwischen 0 und 100.
5. Eingangswahl Zum Auswählen der Eingangsquelle.
6. System-Einstellungen Zum Einstellen der Systemkonfiguration.
VZ229N/VZ229HE VZ229 System-Einstellungen Standardmodus VGA 1920 x 1080 @ 60Hz Splendid Demo Mode ECO Mode OSD-Einstellungen Sprache Tastensperre Information Betriebsanzeige Mehr (Seite 1/2) VZ229 System-Einstellungen Standardmodus VGA 1920 x 1080 @ 60Hz Zurück Ein-/Austaste-Sperre Fabrikseinst (Seite 2/2) • Splendid Demo Mode: Aktiviert den Demomodus für "Splendid"-Funktion. • Lautstärke (nur bei Modell VZ229H): Zum Anpassen der Lautstärke.
3-9 • Information: Zur Anzeige der Monitordaten. • Mehr: Zum Aufrufen der nächsten Seite mit Systemeinstellungen. • Zurück: Zum Aufrufen der vorherigen Seite mit Systemeinstellungen. • Betriebsanzeige: Zum Ein-/Ausschalten der Betriebsanzeige (LED). • Ein-/Austaste-Sperre: Zum Deaktivieren/Aktivieren der Ein-/ Austaste. • Fabrikseinst: Mit JA werden alle Einstellungen auf die werksseitigen Standardvorgaben zurückgesetzt.
7. Verknüpfung Weisen Sie den beiden Schnelltasten spezifische Funktionen zu. VZ229H VZ229 Verknüpfung Standardmodus VGA 1920 x 1080 @ 60Hz Verknüpfung 1 Blaulichtfilter Verknüpfung 2 Splendid Helligkeit Auto-Einstellung Kontrast Farbtemp. Lautstärke GamePlus (Verknüpfung 1) VZ229 Verknüpfung Standardmodus VGA 1920 x 1080 @ 60Hz Verknüpfung 1 Blaulichtfilter Verknüpfung 2 Splendid Helligkeit Auto-Einstellung Kontrast Farbtemp.
VZ229N/VZ229HE VZ229 Verknüpfung Standardmodus VGA 1920 x 1080 @ 60Hz Verknüpfung 1 Blaulichtfilter Verknüpfung 2 Splendid Helligkeit Auto-Einstellung Kontrast Farbtemp. GamePlus (Verknüpfung 1) VZ229 Verknüpfung Standardmodus VGA 1920 x 1080 @ 60Hz Verknüpfung 1 Blaulichtfilter Verknüpfung 2 Splendid Helligkeit Auto-Einstellung Kontrast Farbtemp. GamePlus (Verknüpfung 2) • • Verknüpfung 1: Weisen Sie der Schnelltaste 1 eine Funktion zu.
3.1.2.1 GamePlus-Funktion Die GamePlus-Funktion sorgt für eine perfekte Spielerfahrung bei unterschiedlichsten Spielen. Darüber hinaus wurde eine Fadenkreuzfunktion speziell für Anfänger entwickelt, die ihnen beim Spielen von Egoshootern anfangs etwas unter die Arme greift. So aktivieren Sie GamePlus: 1. Blenden Sie das Bildschirmmenü mit der Menu-Taste ein. 2. Wählen Sie mit oder die Option Verknüpfung. Rufen Sie dann mit der -Taste das Verknüpfung-Menü auf. 3. Wählen Sie mit Verknüpfung 2. 4.
3.2 Technische Daten Modell VZ229H VZ229HE VZ229N Display-Größe 21,5-Zoll-Diagonale (aktiver Anzeigebereich: 476,06 (H) x 267,79 (V) mm) Max. Auflösung 1920 x 1080 Helligkeit (typ.) 250 cd/m2 Kontrastverhältnis (typ.
3.3 Problembeseitigung (FAQ) Problem Betriebsanzeige (LED) leuchtet NICHT Lösungsvorschlag • Prüfen Sie durch Drücken der Monitor eingeschaltet ist. -Taste, ob der • Überprüfen Sie, ob Netzteil und Netzkabel richtig an Monitor und Steckdose angeschlossen sind. • Prüfen Sie die Betriebsanzeige-Funktion im Bildschirmmenü. Wählen Sie zum Einschalten der Betriebsanzeige (LED) „EIN“.
3.