Seria VZ2491R Monitor LCD Instrukcja użytkownika
Wydanie pierwsze Może 2020 Copyright © 2020 ASUSTeK COMPUTER INC. Wszelkie prawa zastrzeżone. Żadnej części tego podręcznika, łącznie z opisanymi w nim produktami i oprogramowaniem, nie można powielać, rozpowszechniać, przetwarzać, przechowywać w systemach pobierania danych ani tłumaczyć na inne języki, w jakiejkolwiek formie lub w jakikolwiek sposób, za wyjątkiem dokumentacji przechowywanej przez nabywcę w ramach kopii zapasowej, bez wyraźnego pisemnego zezwolenia firmy ASUSTeK COMPUTER INC. (“ASUS”).
Spis treści Notices.......................................................................................................... iv Informacje dotyczące bezpieczeństwa....................................................... v Konserwacja i czyszczenie......................................................................... vi Usługa odbioru zużytego sprzętu............................................................. vii 1.1 Witamy!...............................................................................
Uwagi Oświadczenie FCC (Federalnej komisji łączności) To urządzenie jest zgodne z sekcją 15 przepisów FCC. Urządzenie można obsługiwać w przypadku spełnienia dwóch następujących warunków: • Niniejsze urządzenie nie może wywoływać szkodliwych zakłóceń, oraz • Niniejsze urządzenie musi działać w warunkach wszelkich zakłóceń zewnętrznych, w tym takich, które mogą powodować niepożądane działanie.
Informacje dotyczące bezpieczeństwa • • • • • • • • • • • • • • • • Przed rozpoczęciem konfigurowania monitora, należy przeczytać uważnie całą dostarczoną w opakowaniu dokumentację. Aby uniknąć pożaru lub porażenia prądem, nie należy nigdy wystawiać monitora na działanie deszczu ani wilgoci. Nie należy nigdy otwierać obudowy monitora. Wewnątrz monitora znajdują się elementy pod niebezpiecznym wysokim napięciem, które może spowodować poważne obrażenia ciała.
Ten symbol przedstawiający przekreślony rysunek pojemnika na śmieci na kółkach, oznacza, że danego produktu (elektrycznego, elektronicznego sprzętu i zawierającej rtęć baterii guzikowej) nie należy wyrzucać wraz z odpadami komunalnymi. Sprawdź lokalne rozporządzenia dotyczące wyrzucania produktów elektronicznych. Konserwacja i czyszczenie • • • Przed podniesieniem lub zmianą położenia monitora zaleca się odłączenie kabli i przewodu zasilającego.
Źródła dalszych informacji Dodatkowe informacje oraz aktualizacje urządzenia i oprogramowania można znaleźć w poniższych źródłach. 1. Witryny firmy ASUS Witryny firmy ASUS zawierają zaktualizowane informacje dotyczące sprzętu i oprogramowania firmy ASUS. Należy sprawdzić witrynę http://www.asus.com 2. Opcjonalna dokumentacja W opakowaniu urządzenia może znajdować się opcjonalna dokumentacja dołączona przez dostawcę. Te dokumenty nie są częścią standardowej zawartości opakowania.
1.1 Witamy! Dziękujemy za zakupienie monitora LCD firmy ASUS®! Najnowszy szerokoekranowy monitor LCD firmy ASUS zapewnia bardziej wyraźny, szerszy i jaśniejszy obraz oraz dodatkowe funkcje poprawiające jakość oglądanych materiałów. Funkcje te zapewniają wygodę obsługi i wspaniałe wrażenia wizualne podczas korzystania z monitora! 1.
1.3 Montaż podstawy monitora 1. Połóż monitor ekranem w dół na stole. 2. Przymocuj podstawę do ramienia. 3. Obracaj śrubę w kierunku zgodnym z ruchem wskazówek zegara, aby przymocować podstawę. Następnie ustaw monitor pod najbardziej dla siebie wygodnym kątem. •• Aby uniknąć uszkodzenia monitora, zaleca się przykrycie powierzchni stołu miękkim materiałem.
1.4 Podłączanie kabli 1.4.1 Tył monitora LCD VGA VGA 1-3 1. Gniazdo DC-IN 2. Gniazdo HDMI 3.
1.5 Wprowadzenie do monitora 1.5.1 Używanie przycisków sterowania Użyj przycisku sterowania z tyłu monitora do regulacji ustawień obrazu. Menu Zamknij Power Off GamePlus Splendid 1. 2. 3. Wskaźnik zasilania: • Definicje kolorów wskaźnika zasilania zawiera tabela poniżej. Stan Opis Biały WŁ. Bursztynowy Tryb wstrzymania WYŁ. WYŁ. Środkowy przycisk: • Naciśnij ten przycisk, aby przejść do menu OSD. • Naciśnij ten przycisk, aby włączyć monitor po wyłączeniu.
1.5.2 Funkcja QuickFit Funkcja QuickFit zawiera trzy wzorce: (1) Siatka, (2) Rozmiar papieru, (3) 3) Rozmiar zdjęc 1. Wzorzec siatki: ułatwia projektantom i użytkownikom organizowanie zawartości oraz układu na jednej stronie, a także umożliwia uzyskanie spójnego wyglądu i stylu. Alignment Grid 1 2. Alignment Grid 2 Rozmiar papieru: umożliwia wyświetlanie na ekranie dokumentów w ich rzeczywistym rozmiarze. B5 Letter Letter B5 EXIT 3.
2.1 Regulacja monitora • W celu uzyskania optymalnego widzenia, zaleca się spojrzenie na cały monitor, a następnie ustawienie go pod kątem zapewniającym największy komfort pracy. • Podczas zmiany kąta należy przytrzymać wspornik, aby uniknąć przewrócenia monitora. • Zakres regulacji kąta monitora wynosi od -5˚ do 22˚. -5˚ to +22˚ • 2-1 Delikatne drgania monitora podczas regulacji kąta widzenia są zjawiskiem normalnym.
2.1 Odłączanie wspornika/podstawy (do montażu ściennego )(uchwyt ś c ienny tylko dla portu VGA) Odłączana podstawa tego monitora, jest przeznaczona do montażu na ścianie . W celu odłączenia wspornika/podstawy 1. Odłącz kable zasilania i sygnałowy. Ostrożnie połóż monitor ekranem w dół na czystym stole. 2. Użyj śrubokręta do odkręcenia czterech śrub na ramieniu (Rysunek 1), a następnie odłącz ramię/podstawę od monitora (Rysunek 2).
3.1 Menu OSD (menu ekranowe) 3.1.1 Zmiana konfiguracji VZ249HEG1R Splendid Tryb Standardowy VGA 1920 x 1080 @ 60Hz Tryb Standardowy Tryb sRGB Tryb Sceneria Tryb Teatr Tryb Gra Tryb Widok nocny Tryb Odczytu Tryb Ciemni 1. Naciśnij przycisk menu, aby wyświetlić menu OSD. 2. Naciśnij przycisk lub w celu przejścia między opcjami w menu. Po przejściu od jednej pozycji do drugiej nazwa wybranej opcji jest podświetlana. 3. Aby wybrać podświetloną pozycję menu, naciśnij przycisk 4.
3.1.2 1. Wprowadzenie do funkcji menu OSD Splendid Funkcja ta zawiera osiem podfunkcji, które można ustawić zgodnie z własnymi preferencjami. W każdym trybie dostępna jest pozycja Wyzeruj, umożliwiająca zachowanie ustawień lub przywrócenie trybu ustawień wstępnych.
• • • 2. Funkcje Nasycenie, Odcień skóry, Ostrość i ASCR w trybie Tryb Standardowy nie są konfigurowalne przez użytkownika. Funkcje Nasycenie, Temp. barwowa, Odcień skóry, Ostrość, Jasność, Kontrast i ASCR w trybie Tryb sRGB, nie są konfigurowalne przez użytkownika. Funkcje Nasycenie, Odcień skóry, ASCR, Kontrast i Temp. barwowa w trybie Tryb Odczytu nie są konfigurowalne przez użytkownika. Filtr światła nieb. Redukcja poziomu energii światła niebieskiego emitowanego przez podświetlenie LED.
3. Kolor Funkcja ta umożliwia wybranie wymaganych ustawień kolorów obrazu. Kolor VZ249HEG1R Tryb Standardowy VGA 1920 x 1080 @ 60Hz Jasność Kontrast Nasycenie Temp. barwowa Odcień skóry • Jasność: regulacja poziomu jasności. Zakres regulacji wynosi od 0 do 100. • Kontrast: regulacja poziomu kontrastu. Zakres regulacji wynosi od 0 do 100. • Nasycenie: regulacja poziomu nasycenia. Zakres regulacji wynosi od 0 do 100. • Temp. barwowa: wybór żądanej temperatury barwowej.
4. Obraz Za pomocą tej głównej funkcji można dostosować następujące ustawienia obrazu: Ostrość, Trace Free, Kontrola proporcji, VividPixel, ASCR, FreeSync (wyłącznie dla HDMI), ELMB,Shadow Boost,Pozycja, Ostrość i AUTOM. regulacja.
Obraz VZ249HEG1R Tryb Standardowy VGA 1920 x 1080 @ 60Hz Z powrotem Pozycja Ostrość AUTOM. regulacja (Strona 2/2) • Ostrość: regulacja ostrości obrazu. Zakres regulacji wynosi od 0 do 100. • Trace Free: skrócenie czasu odpowiedzi dzięki technologii Over Drive. Zakres regulacji wynosi od 0 (najwolniej) do 100 (najszybciej). • Kontrola proporcji: Regulacja współczynnika proporcji na “Pełny”, “4:3” lub “OverScan”.
5. • Pozycja: regulacja położenia obrazu w poziomie (Pozycja pozioma) i w pionie (Pozycja pionowa). Zakres regulacji wynosi od 0 do 100 (dostępne wyłącznie dla wejścia VGA). • Ostrość: redukcja poziomych i pionowych zakłóceń liniowych obrazu dzięki oddzielnej regulacji ustawień Faza i Zegar. Zakres regulacji wynosi od 0 do 100 (dostępne wyłącznie dla wejścia VGA). • AUTOM. regulacja: Automatyczne wykonywanie regulacji (wyłącznie dla wejścia VGA). Wybór wejścia Wybieranie źródła sygnału wejściowego.
6. Ustawienia systemu Dostosowywanie konfiguracji systemu.
• Splendid Demo Mode: uaktywnianie trybu demo funkcji Splendid. • GamePlus: Włącz funkcję Celownik, Timer lub Licznik FPS lub Wyrównanie wyświetlacza. • QuickFit : Zobacz 1.5.2 Funkcja QuickFit. • ECO Mode: uaktywnianie trybu ekonomicznego w celu oszczędzania energii. • Ustawienia OSD: dostosowywanie ustawień menu OSD Czas zakończenia, DDC/CI i Przezroczystość. • Język: wybór języka menu OSD.
7. Skrót Przypisywanie wybranej funkcji do dwóch przycisków skrótu. VZ249HEG1R Tryb Standardowy VGA 1920 x 1080 @ 60Hz Skrót Skrót 1 Filtr światła nieb. Skrót 2 Splendid Jasność AUTOM. regulacja GamePlus Kontrast Temp. barwowa QuickFit (Skrót 1) VZ249HEG1R Tryb Standardowy VGA 1920 x 1080 @ 60Hz Skrót Skrót 1 Skrót 2 Filtr światła nieb. Splendid Jasność AUTOM. regulacja GamePlus Kontrast Temp.
• • Skrót 1: przypisywanie funkcji do przycisku skrótu 1. Dostępne opcje: Filtr światła nieb., Splendid, Jasność, AUTOM. regulacja, Kontrast, Temp. barwowa, QuickFit i GamePlus. Ustawienie domyślne to GamePlus. Skrót 2: przypisywanie funkcji do przycisku skrótu 2. Dostępne opcje: Filtr światła nieb., Splendid, Jasność, AUTOM. regulacja, Kontrast, Temp. barwowa, QuickFit i GamePlus. Ustawienie domyślne to Splendid.
3.1.2.1 Funkcja GamePlus Funkcja GamePlus zapewnia zestaw narzędzi oraz lepsze środowisko podczas grania w różnego rodzaju gry. Nakładanie celownika z sześć różnymi opcjami celownika, pozwala na wybór najlepiej pasujący do używanej gry. Ekranowy timer można ustawić w lewej części wyświetlacza, aby śledzić upływ czasu gry. Licznik FPS (klatki na sekundę) zapewnia informacje o płynności działania gry.
3.2 Dane techniczne Model VZ249HEG1R Wielkość panelu 23.8’’W(60.5cm) Maks. rozdzielczość 1920x1080@75Hz 250cd/m2 Jasność (typowy) Rzeczywisty współczynnik kontrastu (typowy) 1000:1 Kąt widzenia (CR>10) 178°(H) /178°(V) Kolory wyświetlacza Czas odpowiedzi 16.
3.3 Rozwiązywanie problemów (często zadawane pytania) Problem Nie świeci wskaźnik LED zasilania Możliwe rozwiązanie • Naciśnij przycisk włączony. , aby sprawdzić, czy monitor jest • Sprawdź, czy zasilacz i przewód zasilający zostały prawidłowo podłączone do monitora i gniazda zasilania. • Sprawdź funkcję Wskaźnik zasilania w menu OSD. Wybierz opcję „WŁ.”, aby włączyć wskaźnik LED zasilania.
3.4 Lista obsługiwanego taktowania Podstawowe taktowanie obsługiwane przez komputer PC Rozdzielczość Częstotliwość odświeżania 640x480 60Hz 31.469kHz 640x480 72Hz 37.861kHz 640x480 75Hz 37.5kHz 800x600 56Hz 35.156kHz 800x600 60Hz 37.879kHz 800x600 72Hz 48.077kHz 800x600 75Hz 46.875kHz 1024x768 60Hz 48.363kHz 1024x768 70Hz 56.476kHz 1024x768 75Hz 60.023kHz 1152x864 75Hz 67.
1440x900(RB) 1440x900 1680x1050(RB) 1920x1080 1920x1080 60Hz 75Hz 60Hz 60Hz 75Hz 55.469kHz 70.635kHz 64.674kHz 66.587kHz 84.548kHz Taktowania SD/HD HDMI/DP, formaty CEA-861B, podstawowe obsługiwane taktowanie SD/HD Rozdzielczość 640 x 480 P 720 x 480 P 720 x 480 P 720 x 576 P 720 x 576 P 1280 x 720 P 1280 x 720 P 1440 x 480 P 1440 x 480 P 1440 x 576 P 1440 x 576 P 1920 x 1080 P 1920 x 1080 P 4:3 4:3 16:9 4:3 16:9 16:9 16:9 4:3 16:9 4:3 16:9 16:9 16:9 Częstotliwość odświeżania 59.94/60Hz 59.