VZ24E sorozat LCD-monitor Útmutató
Tartalomjegyzék TCO-tanúsítással......................................................................................... iii Megjegyzések............................................................................................... iv Gondozás és tisztítás................................................................................ viii 1.1 Üdvözöljük!.................................................................................... 1-1 1.2 A csomag tartalma.......................................
TCO-tanúsítással A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Megjegyzések A Federal Communications Commission nyilatkozata Az eszköz megfelel az FCC-előírások 15. fejezetében meghatározott határértékeknek. A működtetésnek az alábbi két feltétele van: • • A készülék nem okozhat káros interferenciát, és Az eszköznek minden zavart el kell viselnie, ideértve az olyan interferenciát is, amely nem kívánt működést eredményezhet. Az elvégzett tesztek eredményei alapján kijelenthető, hogy a készülék az FCC szabályainak 15.
Ha a tápkábel 3 érintkezős csatlakozóval rendelkezik, akkor a kábelt egy földelt, 3 érintkezős aljzatba csatlakoztassa. Ne iktassa ki a tápkábel földelő érintkezőjét, például egy 2 érintkezős adapter csatlakoztatásával. A földelő érintkező fontos biztonsági funkció. Elhasznált berendezések ártalmatlanítása felhasználók által az Európai Unióban lévő magánháztartásokban. Az ilyen jelzéssel ellátott terméket, illetve csomagolását nem szabad háztartási szemétként kezelni.
Biztonsági információ vi • Mielőtt üzembe helyezné a monitort, figyelmesen olvassa el a csomagban mellékelt dokumentációt. • A tűz és áramütés veszélyének elkerülése érdekében, soha ne tegyék ki a monitort eső vagy nedvesség hatásának. • Ne próbálja felnyitni a monitor burkolatát. A monitor belsejében uralkodó veszélyes nagyfeszültség súlyos testi sérülést okozhat. • Ha a tápegység elromlik, ne kísérelje meg saját maga megjavítani. Forduljon szakemberhez vagy a termék viszonteladójához.
FIGYELEM A megadott fej- vagy fülhallgatótól eltérő típus használata maradandó halláskárosodást okozhat a túlzott hangnyomás miatt.
Gondozás és tisztítás • Mielőtt felemelné vagy áthelyezné a monitort, tanácsos leválasztani róla a tápkábelt és a jelkábeleket. Alkalmazza a megfelelő emelési technikát a monitor elhelyezésénél. A monitor emelése vagy hordozása alkalmával mindig a szélénél fogja meg. Ne emelje meg a kijelzőt a talpánál vagy a tápkábelnél fogva. • Tisztítás. Kapcsolja ki a monitort és húzza ki a hálózati tápkábelt. A monitort nem szöszölő, puha kendővel tisztítsa.
Hol tájékozódhatom részletesebben További információkért, illetve termék- vagy szoftverfrissítésekért vegye igénybe az alábbi forrásokat. 1. ASUS weboldalak Az ASUS nemzetközi weboldalai a legfrissebb információkat közlik az ASUS hardver- és szoftvertermékeivel kapcsolatban. Látogassa meg a http://www.asus.com weboldalt. 2. Opcionális dokumentáció A termék csomagja opcionális dokumentációt is tartalmazhat, amelyet a kereskedő biztosított. Ezek a dokumentumok nem részei a szabvány csomagnak.
1.1 Üdvözöljük! Köszönjük, hogy ASUS® LCD-monitort választott! Az ASUS legújabb szélesképernyős LCD monitorja élesebb, szélesebb és világosabb képet biztosít, valamint számos szolgáltatást, amelyek fokozzák élményét. A szolgáltatások élvezetessé és praktikussá teszik a monitor nyújtotta vizuális élményt! 1.
1.3 A monitor összeszerelése A monitor összeszereléséhez: 1. Fektesse a kijelzőt egy kendővel lefedett asztallapra, majd illessze a talpat a karhoz, és rögzítse szorosan a csavarral. A csavart ujjal is könnyen meghúzhatja. 2. A monitort kényelmes szögbe döntse. -5 ~ 23 1 4 1-2 2 3 1.
1.4 A kábelek csatlakoztatása 1.4.1 Az LCD-monitor hátulnézete HDMI 1 DCIN VGA 2 3 1. HDMI csatlakozó 2. VGA csatlakozó 3. Fülhallgató-kimeneti csatlakozó 4. Egyenfeszültségű bemeneti csatlatkozó 5.
1.4.1 Ábrák hat szögből UNIT:mm(inch) 1-4 1.
1.5 A monitor bemutatása 1.5.1 A vezérlőgomb használata Használja a monitor hátulján lévő vezérlőgombot a képbeállítások elvégzéséhez. Főmenü 2 4 1 1. 2. 3. 4. 5. Bezárás 5 Kikapcsolás Bemenetválasztás 3 Fényerő Menü gomb: • Nyomja meg ezt a gombot a monitor bekapcsolásához, ha a monitor ki van kapcsolva. • Nyomja meg ezt a gombot az OSD menübe lépéshez, ha a monitor be van kapcsolva. • Belépés vagy a kiemelt ikon (funkció) kiválasztása, ha az OSD aktív.
2.1 A kar/talp leszerelése (VESA fali konzolhoz) A monitor leszerelhető karját/talpát külön VESA fali konzollal való használatra tervezték. A kar/talp leszerelése • Tanácsos az asztal felületét puha kendővel leteríteni, nehogy megsérüljön a monitor. • A VESA fail konzolkészlet (75 x 75 mm) külön megvásárolható. • Kizárólag UL-minősítéssel rendelkező fali konzollal használható, amelynek tömeg/terhelés értéke legalább 12 kg (csavarméret: M4 x 10 mm).
2.2 A monitor beállítása • Az optimális nézőszög beállításához tanácsos szemből néznie a monitort, majd a lehető legkényelmesebb állásra beállítania a monitor szögét. • Fogja meg a talpat, nehogy leessen a monitor, amikor beállítja a szögét. • A monitor nézőszögét +23˚ és -5˚ között állíthatja be. -5 ~ 23 A nézőszög beállítása közben normális, ha a monitor kissé rázkódik. 2-2 2.
3.1 OSD (képernyőn megjelenő) menü 3.1.1 Útmutató a beállításhoz Splendid ASUS VZ24E Normál mód VGA 1920x1080@60Hz Normál mód sRGB mód Tájkép mód Színház mód Játék mód Éjszakai mód Olvasási Mód Sötét Szoba Mód 1. Nyomja meg a MENÜ gombot, hogy aktiválja az OSD menüt. 2. Nyomja meg a és gombot a menülehetőségek közötti váltáshoz. Ahogy az ikonok között lépked, a lehetőség neve kiemelésre kerül. 3. A menü kiemelt elemének kiválasztásához nyomja meg a Középső gombot. 4.
3.1.2 1. OSD funkciók leírása Splendid Ez a funkció nyolc alfunkciót tartalmaz, amelyeket tetszés szerint kiválaszthat. Mindegyik üzemmód Alaphelyzet funkcióval rendelkezik, ami lehetővé teszi saját beállításának megtartását, illetve az alapértelmezett módba történő visszalépést.
2. Szemvédelem Ezt a funkciót a szemének jobb védelmét célzó beállítások elvégzésére lehet használni. Szemvédelem ASUS VZ24E Normál mód VGA 1920x1080@60Hz Kék Fényszűrő Pihenő emlékeztető Színjavítás EyeCheck • Kék Fényszűrő: Ebben a funkcióban a kékfény-szűrő értéke 0 és a Max. között állítható. * 0: Nincs módosítás. * Max: Minél magasabb a szint, annál kevesebb kékfény szóródik szét.
• Pihenő emlékeztető: Ez a funkció pihenésre emlékeztet a munkaidő beállításának megfelelően. Ha például 30 perces munkaidőt állít be, akkor a monitor bal felső sarkában 5 másodpercig megjelenik egy emlékeztető, amikor letelik az idő. Az OSD emlékeztető eltüntetéséhez nyomja meg bármelyik gombot. Ha ez a funkció engedélyezve van, akkor a következő funkciók nem érhetők el: Splendid Demo Mode, GamePlus, QuickFit. • • Színjavítás: A színjavítás beállítási tartománya 0-tól 100-ig terjed.
3. Szín Válassza ki az Önnek legjobban tetsző színezetet. Szín ASUS VZ24E Normál mód VGA 1920x1080@60Hz Fényerő Kontraszt Telítettség Színhőmérs. Bőrtónu • Fényerő: A beállítási tartomány 0-tól 100-ig terjed. • Kontraszt: A beállítási tartomány 0-tól 100-ig terjed. • Telítettség: A beállítási tartomány 0-tól 100-ig terjed. • Színhőmérs.: Három szín-üzemmódot (Hideg, Normál, Meleg) és Felhasználói mód beállítást tartalmaz.
4. Kép A kép Élesség, Trace Free, Képarány-beállítás, VividPixel, ASCR, Helyzet (csak VGA), Fókusz (csak VGA) és AUTO. Beállítás (csak VGA) ebből a főmenüből állíthatja be. Kép ASUS VZ24E Normál mód VGA 1920x1080@60Hz Élesség Trace Free Képarány-beállítás VividPixel ASCR Mozgás-szinkronizálás FreeSync Helyzet Fókusz AUTO. Beállítás • • • • • • • • • • 3-6 Élesség: A kép élességének beállításához való. A beállítási tartomány 0-tól 100-ig terjed.
5. • a 4:3 funkció csak 4:3 formátumú bemeneti jelforrás választása esetében áll rendelkezésre. Az OverScan (Túlpásztázás) csak akkor elérhető, ha a bemeneti forrás HDMI. • A Fázis a pixel-órajel fázisának beállítására szolgál. A nem megfelelő fázisbeállítással rendelkező képben vízszintes zavarok vannak. • A Órajel (pixelfrekvencia) szabályozza, hogy hány képpontot érint egy vízszintes pásztázás.
6. Rendszer beállítás Beállíthatja a rendszerkonfigurációt. Rendszer beállítás ASUS VZ24E Normál mód VGA 1920x1080@60Hz Splendid Demo Mode Hangerő GamePlus QuickFit ECO Mode OSD beállítás Nyelv Több Rendszer beállítás ASUS VZ24E Normál mód VGA 1920x1080@60Hz Vissza Gombzár Információ Működésjelző Főkapcsoló zár Összes alaphelyzetbe • Splendid Demo Mode: a Splendid funkció demonstrációját aktiválja. • Hangerő: Beállítja a kimeneti hangerőt.
GamePlus főmenü GamePlus – Célkereszt GamePlus GamePlus Célkereszt Időzítő FPS FPS számláló Megjelenítés igazítása GamePlus főmenü-Időzítő GamePlus – FPS számláló NEXT BACK/EXIT GamePlus GamePlus FPS • QuickFit: három mintázatot tartalmaz: (1) Rács (2) Papírméret (3) Fotóméret. 1. Rácsminta: Lehetővé teszi a tervezők és felhasználók számára, hogy a tartalmat és képelrendezést megszervezzék az oldalon és egységes megjelenést és hatást biztosítsanak.
2. Papírméret: A segítségével a felhasználók valós méretben megtekinthetik dokumentumaikat a képernyőn. B5 Letter B5 Letter EXIT 3. Fotóméret: A segítségével a fotósok és egyéb felhasználók pontosan megtekinthetik és valós méretben szerkeszthetik dokumentumaikat a képernyőn. 8x10 3-10 EXIT 5x7 4x6 3x5 2x2 • ECO Mode: Aktiválja a környezetbarát módot az energiatakarékosság érdekében. • OSD beállítás: Az OSD időtúllépés, DDC/CI átvitelének és Átlátszóság beállítását teszi lehetővé.
7. Parancsikon Ennek az opciónak a kiválasztása két gyorsgomb beállítását teszi lehetővé. ASUS VZ24E Normál mód VGA 1920x1080@60Hz Parancsikon Parancsikon 1 Kék Fényszűrő Parancsikon 2 Splendid Fényerő AUTO. Beállítás Kontraszt Bemenetválasztás Színhőmérs. QuickFit GamePlus • Parancsikon 1: „Kék Fényszűrő”, „Splendid”, „Fényerő”, „AUTO. Beállítás”, „Kontraszt”, „Bemenetválasztás”, „Színhőmérs.”, „Hangerő”, „QuickFit” és „GamePlus” közül lehet választani, illetve beállítani ezeket gyorsgombként.
3.2 Műszaki adatok Típus Panelméret 23,8” széles Max. felbontás 1920x1080 Fényerő (jellemző) Valódi kontrasztarány (jellemző) Betekintési szög (CR>10) 250cd/m2 1000:1 178°(F) /178°(V) Megjeleníthető színek száma 16,7 millió (6 bit + FRC) Válaszidő 5 ms (szürkétől szürkéig) HDMI hang Igen HDMI bemenet Igen D-sub bemenet Igen Vonalszintű hangkimenet Igen Bekapcsolt állapot melletti áramfogyasztás < 14W Megjegyzés Energy Star 8.
3.3 Hibaelhárítás (GYIK) Probléma A bekapcsolt állapotot jelző LED NEM világít Lehetséges megoldás • Nyomja meg a gombot, hogy meggyőződjön, bekapcsolt állapotban van a monitor. • Ellenőrizze, hogy megfelelően csatlakozik-e a hálózati tápkábel a monitorhoz, illetve a konnektorhoz. • A Működésjelző funkció ellenőrzése az OSD főmenüben. Válassza az „Be” lehetőséget a bekapcsolt állapotot jelző LED bekapcsolásához.
3.
SD/HD időzítési lista (csak HDMI-bemenet esetében) HDMI 1.3, CEA-861B formátumok, SD/HD támogatott elsődleges időzítések (csak HDMIbemenet esetében) Felbontás Képfrissítési sebesség Vízszintes frekvencia 640x480P 59,94 / 60Hz 31,469 / 31,5kHz 720x480P 59,94 / 60Hz 31,469 / 31,5kHz 720x576P 50Hz 31,25kHz 1280x720P 50Hz 37,5kHz 1280x720P 59,94 / 60Hz 44,955 / 45kHz 1920x1080i 50Hz 28,125kHz 1920x1080i 59,94 / 60Hz 33,716 / 33,75kHz HDMI 1.