Serie VZ24E Monitor LCD Guida dell’utente
Contenuti TCO Certified................................................................................................ iii Avvisi iv Cura e pulizia............................................................................................. viii 1.1 Benvenuto!.................................................................................... 1-1 1.2 Contenuti della confezione.......................................................... 1-1 1.3 Montaggio del monitor......................................
TCO Certified A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Avvisi Dichiarazione della Commissione Federale per le Comunicazioni Questo dispositivo è conforme alla Parte 15 delle Norme FCC. Il funzionamento è soggetto alle seguenti due condizioni: • Questo dispositivo non può provocare interferenze dannose. • Questo dispositivo deve poter ricevere qualsiasi interferenza, incluse quelle che potrebbero causare un funzionamento indesiderato.
Se dotato di una spina tripolare sul cavo di alimentazione, collegare il cavo a una presa tripolare con messa a terra. Non disabilitare il dentello di messa a terra del cavo di alimentazione, ad esempio collegando un adattatore a 2 pin. Il dentello di messa a terra è un importante requisito di protezione.
Informazioni sulla sicurezza vi • Prima di configurare il monitor, leggere attentamente tutta la documentazione fornita. • Per prevenire pericoli di incendi o scosse elettriche, non esporre il monitor a pioggia o umidità. • Non cercare di aprire l’alloggiamento del monitor. Le alte tensioni pericolose all’interno del monitor potrebbero causare gravi lesioni fisiche. • Se l’alimentatore è rotto, non cercare di ripararlo da soli. Contattare un tecnico qualificato o il proprio rivenditore.
AVVISO L'uso di cuffie o auricolari diversi da quelli specificati potrebbe causare la perdita dell'udito a causa di eccessiva pressione acustica.
Cura e pulizia • Prima di sollevare o spostare il monitor, è meglio scollegare i cavi e il cavo di alimentazione. Osservare le corrette tecniche di sollevamento durante il posizionamento del monitor. Quando si solleva o trasporta il monitor, afferrarlo dai bordi. Non sollevare il display dal supporto o dal cavo. • Pulizia. Spegnere il monitor e scollegare il cavo di alimentazione. Pulire la superficie del monitor con un panno non abrasivo privo di lanugine.
Dove trovare ulteriori informazioni Consultare le seguenti fonti per ulteriori informazioni e per gli aggiornamenti su prodotti e software. 1. Siti web ASUS I siti web ASUS in tutto il mondo forniscono informazioni aggiornate su hardware e software ASUS. Consultare http://www.asus.com 2. Documentazione opzionale La confezione del prodotto potrebbe includere documentazione opzionale aggiunta dal rivenditore. Tali documenti non fanno parte della confezione standard.
1.1 Benvenuto! Congratulazioni per l'acquisto del monitor LCD ASUS®! L’ultimo monitor LCD widescreen ASUS offre immagini nitide, più ampie e più luminose, oltre ad una miriade di caratteristiche che migliorano la visualizzazione. Con queste funzioni si godrà della comodità e della deliziosa esperienza visiva fornita dal monitor! 1.
1.3 Montaggio del monitor Per assemblare il monitor: 1. Posizionare il display su una superficie piana, ad esempio un tavolo, sopra un panno, quindi collegare la base al braccio e fissare con la vite per unirli saldamente. Le viti possono essere serrate con le dita. 2. Regolare il monitor in base all'angolo di visione più comodo.
1.4 Collegamento dei cavi 1.4.1 Retro del monitor LCD HDMI 1 1. Porta HDMI 2. Porta VGA 3. Porta uscita cuffie 4. Porta ingresso DC 5.
1.4.
1.5 Presentazione del monitor 1.5.1 Uso dei tasti di controllo Utilizzare i tasti del pannello posteriore del monitor per regolare le impostazioni dell'immagine. Menu principale 2 4 1 1. 2. 3. 4. 5. Chiudi 5 Spegnimento Selezione input 3 Luminosità Tasto Menu: • Premere questo tasto per accendere il monitor quando è spento. • Premere questo tasto per accedere al menu OSD quando il monitor è acceso. • Accedere/selezionare l’icona (la funzione) evidenziata con l’OSD attivato.
2.1 Staccare il braccio/supporto (per montaggio su parete VESA) La base staccabile di questo monitor è progettata in modo particolare per il montaggio su parete VESA. Per rimuovere il braccio/supporto • Si consiglia di coprire la superficie del tavolo con un panno morbido per evitare danni al monitor. • Il kit di montaggio a parete VESA (75 x 75 mm) deve essere acquistato separatamente.
2.2 Regolazione del monitor • Per una visione ottimale, si consiglia di guardare l’intero monitor, quindi regolare il monitor in base all’angolo di visione più comodo. • Afferrare il supporto per impedire che il monitor cada quando si cambia l'inclinazione. • È possibile regolare l'inclinazione del monitor tra +23˚ e -5˚. -5 ~ 23 È normale che il monitor tremi leggermente mentre si regola l’angolo di visuale.
3.1 Menu OSD (On-Screen Display) 3.1.1 Come effettuare la riconfigurazione Splendid ASUS VZ24E Modalità standard VGA 1920x1080@60Hz Modalità standard Modalità sRGB Modalità scenario Modalità teatro Modalità gioco Modalità notturna Modalità Lettura Mod Cam Oscura 1. Premere il tasto MENU per attivare il menu OSD. 2. Premere i tasti e per passare tra le opzioni del Menu. Quando ci si sposta da un'icona all'altra, è evidenziato il nome dell'opzione. 3.
3.1.2 1. Introduzione alle funzioni dell’OSD Splendid Questa funzione dispone di otto funzioni secondarie che possono essere selezionate in base alle preferenze personali. Ogni modalità dispone di una funzione Ripristino che consente di mantenere l’impostazione o tornare alla modalità preimpostata.
2. Eye Care In questa funzione, è possibile regolare le impostazioni per proteggere meglio gli occhi. Eye Care ASUS VZ24E Modalità standard VGA 1920x1080@60Hz Filtro luce blu Promemoria pausa Aumento colori EyeCheck • Filtro luce blu: In questa funzione, è possibile regolare il filtro della luce blu da 0 a Max. * 0: Nessuna modifica. * Max: Maggiore è il livello, minore è la diffusione di luce blu.
• Promemoria pausa: Questa funzione fornisce un promemoria di pausa in base alla durata impostata per l'orario di lavoro. Ad esempio, se si imposta un tempo di lavoro di 30 minuti, viene visualizzato un promemoria popup nell'angolo in alto a sinistra del monitor per 5 secondi allo scadere del tempo. Premere un tasto per far scomparire questo OSD di promemoria. Quando si abilita questa funzione, le seguenti funzioni non sono disponibili: Splendid Demo Mode, GamePlus e QuickFit.
3. Colore Selezionare il colore di immagine preferito con questa funzione. Colore ASUS VZ24E Modalità standard VGA 1920x1080@60Hz Luminosità Contrasto Saturazione Colore Tonalità pelle • Luminosità: La gamma di regolazione è tra 0 e 100. • Contrasto: La gamma di regolazione è tra 0 e 100. • Saturazione: La gamma di regolazione è tra 0 e 100. • Colore: Contiene tre modalità colore predefinite (Freddo, Normale, Caldo) ed una Modalità Utente.
4. Immagine Le funzioni Nitidezza, Trace Free, Controlli, VividPixel, ASCR, Posizione (solo VGA), Fuoco (solo VGA) e Sintonizzazione Auto. (solo VGA) dell’immagine possono essere regolate da questa funzione principale. Immagine ASUS VZ24E Modalità standard VGA 1920x1080@60Hz Nitidezza Trace Free Controlli VividPixel ASCR Sincronizzazione movimento FreeSync Posizione Fuoco Sintonizzazione Auto. 3-6 • Nitidezza: Regola la nitidezza dell'immagine. La gamma di regolazione è tra 0 e 100.
5. • 4:3 è disponibile solo se la sorgente di ingresso è in formato 4:3. OverScan è disponibile solo per la sorgente di ingresso HDMI. • La Fase regola la fase del segnale di frequenza dei pixel. Se la regolazione della fase non è corretta, lo schermo visualizza disturbi orizzontali. • Clock (frequenza dei pixel) regola il numero di pixel letti da una scansione orizzontale. Se la frequenza non è corretta, lo schermo visualizza strisce verticali e l'immagine non è proporzionata.
6. Imp Sistema Regola la configurazione del sistema. Imp Sistema ASUS VZ24E Modalità standard VGA 1920x1080@60Hz Splendid Demo Mode Volume GamePlus QuickFit ECO Mode Impostazione OSD Lingua Più Imp Sistema ASUS VZ24E Modalità standard VGA 1920x1080@60Hz Ndietro Blocco tasti Informazioni Indicatore alimentazione Blocco tasto accensione Regola Tutto • Splendid Demo Mode: Attiva la modalità demo per la funzione Splendid. • Volume: Regola il livello del volume in uscita.
GamePlus Menu principale GamePlus-Mirino GamePlus GamePlus Mirino Timer FPS Contatore FPS Allineamento schermo Menu principale GamePlus-Timer NEXT BACK/EXIT GamePlus-Contatore FPS GamePlus GamePlus FPS • QuickFit: contiene tre modelli: (1) Griglia (2) Dimensioni foglio (3) Dimensioni foto. 1. Griglia: Facilita ai progettisti ed agli utenti di organizzare i contenuti ed il layout su una pagina, e ad ottenere un aspetto coerente.
2. Dimensioni foglio: Permette agli utenti di visualizzare i documenti a dimensioni reali sullo schermo. B5 Lettera B5 Letter EXIT 3. Dimensioni foto: Permette ai fotografi e ad altri utenti di visualizzare e modificare accuratamente le foto a dimensioni reali sullo schermo. 8x10 3-10 EXIT 5x7 4x6 3x5 2x2 • ECO Mode: Attiva la modalità eco per il risparmio energetico. • Impostazione OSD: Regola Tempo attesa OSD, DDC/CI e Trasparenza del menu OSD. • Lingua: Seleziona la lingua OSD.
7. Collegamento Selezionando questa opzione si possono impostare due tasti di scelta rapida. ASUS VZ24E Modalità standard VGA 1920x1080@60Hz Collegamento Collegamento 1 Filtro luce blu Collegamento 2 Splendid Luminosità Sintonizzazione Auto. Contrasto Selezione input Colore QuickFit GamePlus • Collegamento 1: L'utente può scegliere tra "Filtro luce blu", "Splendid", "Luminosità", "Sintonizzazione Auto.
3.2 Specifiche Modello Dimensioni schermo 23,8”W Risoluzione max. 1920x1080 Luminosità (tipico) 250cd/m2 Rapporto di contrasto intrinseco (tipico) Angolo di visualizzazione (CR>10) Colori dello schermo Tempo di risposta 1000:1 178°(V) /178°(H) 16,7 milioni (6 bit+FRC) 5 ms (G a G) Audio da HDMI Sì Ingresso HDMI Sì Ingresso D-Sub Sì Uscita linea audio Consumo all'accensione Nota Colori coperture Sì < 14W Standard Energy Star 8.
3.3 Risoluzione dei problemi (FAQ) Problema Possibile soluzione Il LED di alimentazione non è attivo • Premere il tasto per controllare se il monitor è in modalità ATTIVO. • Controllare che il cavo di alimentazione sia collegato correttamente al monitor e alla presa di rete. • Controllare la funzione Indicatore alimentazione nel menu principale OSD. Selezionare "ATTIVO" per attivare il LED d’alimentazione.
3.
Temporizzazioni SD/HD (solo ingresso HDMI) Formati HDMI 1.3, CEA-861B, supporto temporizzazioni principali di SD/HD (solo ingresso HDMI) Risoluzione Frequenza di aggiornamento Frequenza orizzontale 640x480P 59,94 / 60Hz 31,469 / 31,5kHz 720x480P 59,94 / 60Hz 31,469 / 31,5kHz 720x576P 50Hz 31,25kHz 1280x720P 50Hz 37,5kHz 1280x720P 59,94 / 60Hz 44,955 /45 kHz 1920x1080i 50Hz 28,125kHz 1920x1080i 59,94 / 60Hz 33,716 / 33,75kHz Formati HDMI 1.