Serie VZ24E Monitor LCD Guía del usuario
Tabla de contenido Certificación TCO........................................................................................ iii Avisos iv Limpieza y mantenimiento........................................................................ viii 1.1 ¡Bienvenido!.................................................................................. 1-1 1.2 Contenido del paquete................................................................. 1-1 1.3 Ensamblar el monitor...........................................
Certificación TCO A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Avisos Declaración de la Comisión Federal de Comunicaciones (FCC, Federal Communications Commission) Este dispositivo cumple la Parte 15 de las Reglas de la FCC. Su funcionamiento está sujeto a dos condiciones: • Este dispositivo no puede causar interferencias perjudiciales, y • Este dispositivo debe aceptar cualquier interferencia recibida, incluida la interferencia que pueda causar un funcionamiento no deseado.
Si el cable de alimentación dispone de un enchufe de 3 clavijas, conéctelo a una toma de corriente de tres clavijas con conexión a tierra. No deshabilite la clavija de conexión a tierra por cable, por ejemplo, conectando un adaptador de 2 clavijas. La clavija de conexión a tierra es una característica de seguridad importante.
Información de seguridad vi • Antes de instalar el monitor, lea atentamente toda la documentación incluida en el paquete. • Para evitar incendios o descargas eléctricas, no exponga el monitor a la lluvia ni a la humedad. • No abra la carcasa del monitor. En el interior del mismo hay componentes con voltaje alto y peligroso que puede provocar graves daños personales. • Si la fuente de alimentación se avería, no intente arreglarla usted mismo.
ADVERTENCIA El uso de otros auriculares o audífonos que no sean los especificados puede producir pérdida de audición debido a las presiones de sonido excesivas.
Limpieza y mantenimiento • Antes de levantar o reparar el monitor, debe desconectar los cables y el cable de alimentación. Siga las técnicas correctas para levantar el monitor cuando lo coloque. Cuando levante o transporte el monitor, agárrelo por los bordes. No levante la pantalla por la base ni el cable de alimentación. • Limpieza. Apague el monitor y desenchufe el cable de alimentación. Limpie la superficie del monitor con un paño sin pelusas y no abrasivo.
Dónde encontrar más información Consulte las siguientes fuentes para obtener información adicional y las actualizaciones del software. 1. Sitios Web de ASUS Los sitios Web de ASUS en todo el mundo proporcionan información actualizada del hardware y los productos de software de ASUS. Consulte el sitio Web http://www.asus.com 2. Documentación opcional El paquete del producto puede incluir documentación opcional que puede haber agregado su distribuidor. Estos documentos no forman parte del paquete estándar.
1.1 ¡Bienvenido! ¡Gracias por adquirir el monitor LCD de ASUS®! Los monitores LCD panorámicos más modernos de ASUS proporcionan una visualización más nítida, clara y brillante, además de una gran cantidad de funciones que mejoran la experiencia de visualización. ¡Con estas funciones, disfrutará de la comodidad y la experiencia visual agradable que proporciona el monitor! 1.
1.3 Ensamblar el monitor Para ensamblar el monitor: 1. Coloque la pantalla plana sobre un paño encima de una mesa. A continuación, acople la base al brazo y fíjela con el tornillo para que ambas piezas queden firmemente unidas. Puede apretar fácilmente el tornillo con los dedos. 2. Ajuste el monitor con el ángulo que le resulte más cómodo.
1.4 Conectar los cables 1.4.1 Parte posterior del monitor LCD HDMI 1 2 1. Puerto HDMI 2. Puerto VGA 3. Puerto de salida de auriculares 4. Puerto ENTRADA DE CC 5.
1.4.
1.5 Presentación del monitor 1.5.1 Utilizar los botones de control Utilice los botones de control situados en la parte posterior del monitor para ajustar la configuración de la imagen. Menú principal 2 4 1 1. 2. 3. 4. 5. Cerrar 5 Apagar Selección de entrada 3 Brillo Botón Menú: • Presione este botón para encender el monitor cuando está apagado. • Presione este botón para entrar en el menú OSD cuando el monitor está encendido.
2.1 Desmontar el brazo y la base (para el soporte para pared VESA) El brazo desmontable de este monitor LCD está especialmente diseñado para soportes para pared VESA. Para desmontar el brazo y la base • Es recomendable que cubra la superficie de la mesa con un paño suave para no dañar el monitor. • El kit para instalación en pared VESA (75 mm x 75 mm) se adquiere por separado.
2.2 Ajustar el monitor • Para conseguir la mejor visualización posible, es recomendable mirar a toda la superficie del monitor y, a continuación, ajustarlo con el ángulo que le resulte más cómodo. • Sujete la base para impedir que el monitor se caiga cuando cambie su ángulo. • Puede ajustar el ángulo del monitor entre +23˚ y -5˚. -5 ~ 23 Es normal que el monitor tiemble ligeramente mientras ajusta el ángulo de visualización.
3.1 Menú en pantalla (OSD) 3.1.1 Cómo realizar la reconfiguración Splendid ASUS VZ24E Modo Estándar VGA 1920x1080@60Hz Modo Estándar Modo sRGB Modo Escenario Modo Cine Modo Juego Modo Noche Modo De Lectura Modo Sala Oscura 1. Pulse el botón Menú para activar el menú OSD. 2. Presione los botones y para alternar entre las opciones de Menú. A medida que pase de un icono a otro, el nombre de opción se resaltará. 3. Para seleccionar el elemento resaltado en el menú, presione el botón Centro. 4.
3.1.2 1. Presentación de las funciones OSD Splendid Esta función contiene ocho funciones secundarias que puede seleccionar según sus preferencias. Cada modo tiene la opción Reiniciar que permite mantener la configuración o recuperar el modo preestablecido.
2. Cuidado ocular En esta función, puede ajustar la configuración para proteger mejor sus ojos. Cuidado ocular ASUS VZ24E Modo Estándar VGA 1920x1080@60Hz Filtro de luz azul Aviso de descanso Aumento de color EyeCheck • Filtro de luz azul: En esta función puede ajustar el filtro de luz azul de 0 al máximo. * 0: Sin cambios. * Máximo: Cuanto mayor sea el nivel, más luz azul se reducirá.
• Aviso de descanso: Esta función le proporciona un recordatorio de descanso, de acuerdo a lo que establece como su horario de trabajo. Por ejemplo, si establece un tiempo de trabajo de 30 minutos, cuando terminen, aparecerá un aviso recordatorio en la esquina superior izquierda del monitor durante 5 segundos. Presione cualquier tecla para hacer que este recordatorio OSD desaparezca.
3. Color Esta función permite seleccionar el color de la imagen que desea. Color ASUS VZ24E Modo Estándar VGA 1920x1080@60Hz Brillo Contraste Saturación Temp del color Tono de piel • Brillo: El intervalo de ajuste está comprendido entre 0 y 100. • Contraste: El intervalo de ajuste está comprendido entre 0 y 100. • Saturación: El intervalo de ajuste está comprendido entre 0 y 100. • Temp del color: Contiene tres modos de color predefinidos (Frío, Normal y Cálido) y la opción Modo Usuario.
4. Imagen Desde esta función principal puede ajustar las siguientes opciones: Nitidez, Trace Free, Controle de Aspecto, VividPixel, ASCR, Posición (solamente VGA), Enfoque (solamente VGA) y SINTONIZ. AUTOMÁT. (solamente VGA). Imagen ASUS VZ24E Modo Estándar VGA 1920x1080@60Hz Nitidez Trace Free Controle de Aspecto VividPixel ASCR Sincronización de movimiento FreeSync Posición Enfoque SINTONIZ. AUTOMÁT. • • • • • • • • • • 3-6 Nitidez: Permite ajustar la nitidez de la imagen.
5. • 4:3 solamente está disponible cuando la fuente de entrada tiene el formato 4:3. La opción OverScan solamente está disponible para la fuente de entrada HDMI. • La opción Fase ajusta la fase de la señal del reloj de píxeles. Con un ajuste de fase intenso, la pantalla muestra perturbaciones horizontales. • La opción Frecuencia (frecuencia de píxeles) controla el número de píxeles explorados por barrido horizontal.
6. Config. Sistema Permite ajustar la configuración del sistema. Config. Sistema ASUS VZ24E Modo Estándar VGA 1920x1080@60Hz Splendid Demo Mode Volumen GamePlus QuickFit ECO Mode Config. OSD Idioma Más Config. Sistema ASUS VZ24E Modo Estándar VGA 1920x1080@60Hz Atrás Bloqueo de teclas Información Indicador de encendido Bloq. botón encendido Reset Todo • Splendid Demo Mode: Permite activar el modo de demostración para la función Splendid. • Volumen: permite ajustar el nivel de volumen de salida.
GamePlus Menú principal GamePlus-Punto de mira GamePlus GamePlus Punto de mira Temporizador FPS Contador de FPS Alineación de pantallas Temporizador principal GamePlus NEXT BACK/EXIT GamePlus-Contador de FPS GamePlus GamePlus FPS • QuickFit: contiene tres patrones (1) Cuadrícula (2) Tamaño de papel (3) Tamaño de fotografía. 1.
2. Tamaño de papel: Permite a los usuarios ver sus documentos a tamaño real en la pantalla. B5 Carta B5 Letter EXIT 3. Tamaño de fotografía: Permite a los fotógrafos y otros usuarios ver y editar sus fotografías de forma precisa a tamaño real en la pantalla. 8x10 3-10 EXIT 5x7 4x6 3x5 2x2 • ECO Mode: permite activar el modo ecológico para ahorrar energía. • Config. OSD: Permite ajustar las opciones Temporizador OSD, DDC/CI y Transparencia para la pantalla OSD.
7. Acceso directo Seleccione esta opción para establecer dos botones de acceso directo. ASUS VZ24E Modo Estándar VGA 1920x1080@60Hz Acceso directo Acceso directo 1 Filtro de luz azul Acceso directo 2 Splendid Brillo SINTONIZ. AUTOMÁT. Contraste Selección de entrada Temp del color QuickFit GamePlus • Acceso directo 1: El usuario puede seleccionar una de las siguientes opciones como botón de acceso directo: “Filtro de luz azul”, “Splendid”, “Brillo”, “SINTONIZ. AUTOMÁT.
3.2 Especificaciones Modelo VZ24EHE Tamaño del panel 23,8” AN Resolución máxima 1920x1080 Brillo (típ.) 250 cd/m2 Relación de contraste intrínseco (típ.) Ángulo de visualización (CR>10) 178° (V), 178° (H) Colores de visualización 16,7 M (6 bit+FRC) Tiempo de respuesta 5 ms (G a G) Sonido de HDMI Sí Entrada HDMI Sí Entrada D-Sub Sí Entrada de línea de audio Sí Consumo en estado de ENCENDIDO Nota < 14W Estándar Energy Star 8.
3.3 Solucionar problemas (preguntas más frecuentes) Problema Solución posible El indicador LED de alimentación • Presione el botón para comprobar si el monitor no se ENCIENDE se encuentra en el modo ENCENDIDO. • Compruebe si el cable de alimentación está correctamente conectado al monitor y a la toma de corriente. • Compruebe la función Indicador de encendido en el menú principal OSD. Seleccione “ENCENDER” para iluminar el LED de alimentación.
3.
Tiempos SD/HD (solo entrada HDMI) HDMI 1.3, formatos CEA-861B, tiempo principales admitidos SD/HD (solo entrada HDMI) Resolución Tasa de actualización Frecuencia horizontal 640 x 480P 59,94 / 60Hz 31,469 / 31,5KHz 720x480P 59,94 / 60Hz 31,469 / 31,5KHz 720x576P 50Hz 31,25KHz 1280x720P 50Hz 37,5KHz 1280x720P 59,94 / 60Hz 44,955/45 kHz 1920 x 1080i 50Hz 28,125KHz 1920 x 1080i 59,94 / 60Hz 33,716 / 33,75KHz HDMI 1.