User guide

3-4
5. If you select
Share-WEP
or
WPA-
PSK
in Step 4, you are required to
input a password. You can choose
to configure the password in
either ASCII or HEX mode. If you
choose HEX mode, input 10 hex
digits for 64-bit encrytion, or 26
hex digits for 128-bit encryption.
Click
Next
to continue.
6. Select your Internet connection
and click
Next
.
7. The soft AP configuration is
complete. Record the setup
information on your note and
click
Finish
to quit the ASUS
WiFi-AP Solo™ wizard.
8. The default IP address of WiFi-AP
Solo™ is 192.168.0.1. To modify the
IP settings, double-click the wireless
network icon in the system tray ->
click
Properties
-> double-click
Internet Protocol (TCP/IP)
.