User guide

3-8

5. Conﬁgure the

security settings (if

have) in the Wireless

Network Property

page. Select the key

type, key length and

input the keys. Click

Finish

to apply the

settings and return to

the setup wizard.

Ask your network administrator for the wireless AP settings. The WiFi-AP

Solo™ settings must be identical with the wireless AP it connects to.

6. Setting up the TCP/IP for your

computer. If DHCP server function

is enabled on the AP, you can

automatically get the IP address,

subnet mask, gateway and DNS

server from the AP by selecting

Automatically obtain IP address

and

Automatically obtain DNS

server

. If DHCP server is disabled

or not supported on the AP,

you must manually input these

parameters. When the settings

are complete, click

Finish

to exit the

setup wizard.

If DHCP server is disabled on the wireless AP in your network, refer to your

network administrator for a valid IP address.