User guide

3-11
1. Open the WiFi-AP Solo™ setup wizard
by right-clicking the system tray icon and
selecting
WiFi-AP Solo Wizard
.
3.4 Setting up a wireless card (Ad-hoc)
If there is no wireless access point in your environment, you can switch your
WiFi-AP Solo™ to the Ad-hoc mode to connect and communicate with other
wireless-enabled computers. Refer to section 1.4.3 for network topology.
3.4.1 Setting up Ad-hoc with setup wizard
2. Select
Station
and click
Next
.
3. Select
Ad-hoc
and click
Next
. If
there is no Ad-hoc node in your
environment, you are directed to
Wireless Network Properties
page to create an Ad-hoc profile
so that you can be detected and
connected by other wireless
stations.
4. Setup the
operation
channel
and the
wireless network
security settings
.
The operation channel
and security settings
must be identical
between two Ad-hoc
nodes. Click
Finish
to
apply and return to the
wizard.