WL-500W Wireless Router Quick Start Guide 1. Package contents • WL-500W wireless router x 1 • Power adapter x 1 • Utility CD x 1 • RJ45 cable x 1 • Quick Start Guide x 1 2.
WL-500W Wireless Router Quick Start Guide PWR (Power) Off On Flashing-slow Flashing-quick No power System ready Firmware upgrade failed EZsetup processing AIR (Wireless Network) Off On Flashing No power Wireless system ready Transmitting or receiving data (wireless) WAN (Wide Area Network) Off On Flashing No power or no physical connection Has physical connection to an Ethernet network Transmitting or receiving data (through Ethernet ca
WL-500W Wireless Router Quick Start Guide 3. Getting started The ASUS WL-500W Wireless Router can meet various working scenarios with proper configuration. The default settings of the wireless router may change to meet your individual needs. Thus, before using the wireless router, check the basic settings to make sure they all work in your environment. ASUS provides a utility named EZSetup for fast wireless configuration.
WL-500W Wireless Router Quick Start Guide Setting up the IP address manually To manually set the IP address, you need to know the default settings of the wireless router: • I P a d d r e s s 192.168.1.1 • Subnet Mask 255.255.255.0 To set up the connection with a manually assigned IP address, the address of your PC and the wireless router must be within the same subnet: • I P a d d r e s s : 192.168.1.xxx (xxx can be any number between 2 and 254.
WL-500W Wireless Router Quick Start Guide After logging in, you can see the ASUS Wireless Router home page. The homepage displays quick links to configure the main features of the wireless router. 5) Quick setup To start quick setup, click Next to enter the “Quick Setup” page. Follow the instructions to setup the ASUS Wireless Router. 1. Select your time zone and click Next. 2. ASUS wireless router supports five types of ISP services: cable, PPPoE, PPTP, static WAN IP, and Telstra BigPond.
WL-500W Wireless Router Quick Start Guide PPPoE user If you use PPPoE service, select ADSL connection that requires username and password. It is known as PPPoE. You need to input the username and password provided by your ISP. Click Next to continue. PPTP user If you are using PPTP services, select ADSL connection that requires username, password and IP address. Fill in the username, password and IP address provided by your ISP into the fields. Click Next to continue.
WL-500W Wireless Router Quick Start Guide If you want to protect transmitted data, select a Security Level to enable encryption methods. Medium: Only users with the same WEP key settings can connect to your wireless router and transmit data using 64bits or 128bits WEP key encryption. High: Only users with the same WPA pre-shared key settings can connect to your wireless router and transmit data using TKIP encryption. 4.
WL-500W Wireless Router Quick Start Guide 6. To connect the wireless router from a wireless client, you can use Windows® Wireless Zero Configuration service to set up the connection. If you use ASUS Wireless Card on your computer, you can use the One Touch Wizard utility supplied in WLAN Card support CD for wireless connection. Configuring WLAN card with Windows® WZC service If you use non-ASUS wireless card, you can set up the wireless connection with Windows® Wireless Zero Configuration (WZC) service.
WL-500W Wireless Router Quick Start Guide FCC Warning Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
WL-500W Wireless Router Quick Start Guide Safety Information To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements – Article 3 Protection requirements for health and safety – Article 3.1a Testing for electric safety according to EN 60950-1 has been conducted.