Manual

WL-500gP V2 Wireless Router User Manual
24
ASUS WL-500gP V2 Wireless Router provides two USB2.0 ports for connecting
USB storage, USB camera, and USB printer, therefore, you can monitor the
working environment, share data and printer with both wired and wireless users in
your network.
Warning:
Before unplugging the USB storage disk from WL-500gP V2, you must
eject the disk in
Status & Log -> USB
page to prevent data corruption.
Note:
Before applying change and rebooting WL-500gP V2, make sure all USB
applications are disabled, it would take more than 20 seconds for WL-500gP V2 to
reboot.
1) Sharing USB storage
To use this feature, you need to plug a USB hard disk to the USB2.0 port on the rear
panel of WL-500gP V2. Make sure the hard disk is formatted and partitioned properly.
Note:
FAT32 has a 4GB le size limitation and do not support les above that size. If
you want to use les of above 4GB, you must format the disk to EXT2 le system.
Creating user account
To share the data in the USB storage, you need to create
user accounts rst.
2. I np ut
U s er N a m e
a n d
Password
for the accounts.
C l i c k
A d d
t o a d d t h e
account to the list.
3. To d e le te an a cc o u n t,
select the account from
the list and click
Del
.
4. Click
Apply
to apply the
changes and restart the
wireless router.
Creating share folder and access right
You can create a new share folder or share an existing
folder in your hard disk.
1. Click
USB Application -> User List
in the left side
menu to open the conguration page.
1. Click
USB Application -> Basic Cong
in the left
side menu to open the conguration page.
5. Application features