WL-520g Quick Reference Guide Index 1. Package Contents .........................................................3 2. Connecting ADSL Modem and Wireless Router ........5 1) Cable Connection ..................................................5 2) Status Indicators ...................................................6 3. Clients Setup: Example: Installing WL-167g USB WLAN Adapter ....7 4. Router and Client Wireless Connection Setup ......... 11 1) Utility Installation for WL-520g .............................
WL-520g Quick Reference Guide Index 4) Setting up Netmeeting, MSN, Online Gaming and Remote Control Program .....................................29 5) Setting up DDNS .................................................31 6) Setting up WDS ...................................................35 7. Trouble Shooting .........................................................36 8. Appendix ......................................................................
WL-520g Quick Reference Guide 1.
WL-520g Quick Reference Guide Manufacturer Contact Information ASUSTeK COMPUTER INC. (Asia-Pacific) Company address: 15 Li-Te Road, Beitou, Taipei 11259 General (tel): +886-2-2894-3447 Web site address: General (fax): +886-2-2894-7798 General email: www.asus.com.tw info@asus.com.tw ASUS COMPUTER INTERNATIONAL (America) Company address: 44370 Nobel Drive, Fremont, CA 94538, USA General (fax): +1-510-608-4555 Web site address: usa.asus.
WL-520g Quick Reference Guide 2.
WL-520g Quick Reference Guide 2) Status Indicators PWR (Power) Off On Flashing-slow Flashing-quick No power System ready Firmware upgrade failed EZsetup processing Note: If the setup button is pushed without running the EZsetup wizard utility, the PWR indicator will flash and Internet connections will pause for a short period but will then return to normal operation without changes.
WL-520g Quick Reference Guide 3. Client Setup: Example: Installing WL-167g USB WLAN Adaptor * Caution: Before plugging the WL-167g into the USB port of your computer, please first insert the support CD to your CD drive and run the installations program of ASUS Wireless LAN Card Utilities . 1. Click the first line "Install ASUS WLAN Card Utilities/ Driver" to run the installation program. 2. Click "Next" to continue.
WL-520g Quick Reference Guide 3. Client Setup:(Cont.) Example: Installing WL-167g USB WLAN Adaptor 3. Click "Next" to accept the designated location for files to be installed. 4. Please select a Program Folder and click "Next" to continue.
WL-520g Quick Reference Guide 3. Client Setup:(Cont.) Example: Installing WL-167g USB WLAN Adaptor 5. Installation is now in process, please wait for several seconds. 6. After completing the installation, a "Restart Computer" dialog box will appear. Connect WL-167g WLAN adaptor to USB port, then select "Yes" and press "Finish" to restart your computer.
WL-520g Quick Reference Guide 3. Client Setup:(Cont.) Example: Installing WL-167g USB WLAN Adaptor **For Windows XP users, there are some more steps to click through. 7. After rebooting your Windows XP, a "Wireless Option" message box will appear. Please click "OK". 8. Then "ASUS ONE TOUCH WIZARD" will appear, please click "Cancel". 9. A warning box from " A S U S O N E TO U C H WIZARD" will appear. Please click "OK" to shut it down.
WL-520g Quick Reference Guide 4. WL-520g (Router), WL-167g (Client) Wireless Connection Setup 1) Utility Installation for WL-520g 1.Click the first line "Install ASUS Wireless Router Utilities" to run the setup installation program. 2. Click "Next" to continue.
WL-520g Quick Reference Guide 4. WL-520g (Router), WL-167g (Client) Wireless Connection Setup (Cont.) 1) Utility Installation for WL-520g (Cont.) 3. Click "Next" to confirm the designated location for installation. 4. Select a program folder and click "Next".
WL-520g Quick Reference Guide 4. WL-520g (Router), WL-167g (Client) Wireless Connection Setup (Cont.) 1) Utility Installation for WL-520g (Cont.) 5. After completing installation, "Restart Computer" dialog box will appear. Select "Yes" and press "Finish" to restart your computer. 6.Open the "EZSetup Wizard".
WL-520g Quick Reference Guide 4. WL-520g (Router), WL-167g (Client) Wireless Connection Setup (Cont.) 2) EZSetup (Default) Wireless LAN setup will complete in two easy steps. 1 Push “Setup” over 3 sec. and release. LAN4 LAN3 LAN2 LAN1 WAN 2 Click the EZSetup button in the utility. 3 Security-enabled wireless LAN environment is built now.You can print your key and your other network settings for your reference. Wireless LAN setup is complete. Click Next to make Internet connection settings.
WL-520g Quick Reference Guide 2) EZSetup (Default) (Cont.) 4 Choose the time zone where you are located in. 5 Select the connection type (Cable or ADSL) you use.(Example: Cable modem or other connection type that gets IP automatically ) Depending on the connection type you selected, you may require additional information from your ISP. Some fields are optional and may be left blank. 6 (ISP requirements depend on selection in the connection type.
WL-520g Quick Reference Guide 2) EZSetup (Default) (Cont.) 7 Depending on the service level you applied for with your ISP, your IP may be random (automatic) or fixed (enter manually). Example 1: Cable Modem or other connection type that gets IP automatically. 8 16 Example 2: ADSL or other connection type that uses static IP address.
WL-520g Quick Reference Guide 3) EZSetup (Customized) Only differences between the default setup will be shown below. Select the “ Customization” check box for advanced wireless LAN functions. 1 2 You can check for automatic or uncheck for manual wireless network naming. You must enter a name if unchecked.
WL-520g Quick Reference Guide 3) EZSetup (Customized) (Cont.) 3 You can choose to use automatic or manual security key. If all your clients are using ASUS WPA capable wireless network adapters, you can select WPA for extra strength security. (This selection will only be available for ASUS WPA adapters.) (WEP or WPA depends on security selection in the previous screen.) 4 If you chose “Manually assign”, enter a WEP (Wired Equivalent Privacy) key following the guideline as shown.
WL-520g Quick Reference Guide 3) EZSetup (Customized) (Cont.) 5 If you chose “Manually assign” and selected the WPA check box , enter a WPA (Wi-Fi Protected Access) key following the guideline as shown. 6 Security-enabled wireless LAN environment is built now.You can print your key and your other network settings for your reference. Wireless LAN setup is complete. Click Next to make Internet connection settings. *For the following steps of Internet settings, please refer to P14~P15 Step 4~8.
WL-520g Quick Reference Guide 5. Configuring the ASUS Wireless Router The ASUS Wireless Router can be configured to meet various usage scenarios. Some of the factory default settings may suit your usage; however, others may need changing. Prior to using the ASUS Wireless Router, you must check the basic settings to guarantee it will work in your environment. Configuring the ASUS Wireless Router is done through a web browser.
WL-520g Quick Reference Guide Wireless-Connection Refer to your wireless adapter userʼs manual on associating with the ASUS Wireless Router. The default SSID of the ASUS Wireless Router is “default” (lower case), encryption is disabled and open system authentication is used.
WL-520g Quick Reference Guide 2) Setting IP address for Wired or Wireless Connection (Cont.) Setting IP Manually If you want to set your IP address manually, the following default settings of the ASUS Wireless Router should be known: • IP address 192.168.1.1 • Subnet Mask 255.255.255.0. If you set your computerʼs IP manually, it needs to be on the same segment. For example: • IP address 192.168.1.xxx (xxx can be any number between 2 and 254 that is not used by another device) • Subnet Mask 255.255.255.
WL-520g Quick Reference Guide 3) Configuring the Wireless Router 2 1 Enter the following address in your web browser: http://192.168.1.1 Defaults User name: admin Password: admin 3 After logging in, you will see the ASUS Wireless Router home page. The homepage displays quick links to configurate the main features of the router.
WL-520g Quick Reference Guide 6. Commonly Used Features The following pages are setup examples for your reference, you could setup these features in web browser. 1) How to Setup Encryption 1-1) WL-520g Encryption Setup ASUS WL-520g provides a short cut to set up encryption for your wireless router via EZSetup features. Please refer to P.16-P.17 EZSetup (customized) procedures to set up WEP or WPA encryptions.
WL-520g Quick Reference Guide 1-2) WL-167g Encryption Setup (Cont.) 1. Click "Yes" and jump to config page, then set the config indentical with the router. (Use WEP-64bit Key: 2627F68597 as shown) 2. Click "Apply" when finish.
WL-520g Quick Reference Guide 1-2) WL-167g Encryption Setup (Cont.) 3. Click "Status" button to verify if the device is connected. 4. Remember to save the settings, click "Save as profile" and click "Save", then click "OK" to finish the setup.
WL-520g Quick Reference Guide 2) Setting up a Server in Your LAN Virtual Server is a kind of technology which enables a computer to receive specialized packets from network. It is to assign a certain host to act as a link between inner LAN and outside Web, FTP server. Virtual DMZ provides an allport-match function, which grants specified computers unlimited authority to get access to network resources.
WL-520g Quick Reference Guide 3) Setting up Switching Hub & Pure AP(No IP Share NAT) 1 DSL or Cable Modem WAN LAN4 LAN3 ASUS Wireless Router 2 3 4 5 28 LAN2 LAN1 WAN
WL-520g Quick Reference Guide 4) Setting up Net Meeting, MSN, Online Gaming, and Remote Control Programs (Cont.
WL-520g Quick Reference Guide 4) Setting up Net Meeting, MSN, Online Gaming, and Remote Control Programs (Cont.
WL-520g Quick Reference Guide 5) Setting up DDNS 1 2 1 2 3 3 4 4 (More on next page) 31
WL-520g Quick Reference Guide 5) Setting up DDNS (Cont.
WL-520g Quick Reference Guide 5) Setting up DDNS (Cont.
WL-520g Quick Reference Guide 5) Setting up DDNS (Cont.
WL-520g Quick Reference Guide 6) Setting up WDS 1 2 3 4 2 5 1 6 35
WL-520g Quick Reference Guide 7. Trouble Shooting 1. Cannot access to web browser for router configuration 1. Open a web browser and open "Internet Options" dialog box. 2. Click on "Delete Cookies" and "Delete Files".
WL-520g Quick Reference Guide 7. Trouble shooting (Cont.) 2. Cannot Establish Connection via Wireless Out of Range: Put the router closer to the client. Try to change the czhannel setting. Authentication: Can use a wire-connected computer to connect to router. Check the wireless security setting, Or can do a hard reset on the router. Couldn't find the router: Do the hard restore on the router and test again. Check the setting in the wireless adapter. Such as SSID and encryption setting. 3.
WL-520g Quick Reference Guide 7. Trouble shooting (Cont.) 4.Internet is not accessible Check the lights on ADSL modem and Wireless Router Check the "WAN" led on the router is on or not. If the led isn't on, please change the cable to try again. 4.1. When ADSL Modem "Link" light is on (not blinking), this means Internet Access is Possible. Restart your computer. Reconfigurate the settings for ASUS Router and please refer to the Quick Setup Guide of the WL-520g.
WL-520g Quick Reference Guide 7. Trouble shooting (Cont.) 5.Network name or encryption keys are unknown Can try to setup the wired connection for setup the wireless encryption again. Can do the hard reset on the router. 6.How to reset to defaults The following are factory default values.
WL-520g Quick Reference Guide 8. Appendix FCC Warning Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
WL-520g Quick Reference Guide 8. Appendix (Cont.) CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the userʼs authority to operate the equipment.
WL-520g Quick Reference Guide 8. Appendix (Cont.) Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-17 has been conducted. These are considered relevant and sufficient. Effective use of the radio spectrum – Article 3.2 Testing for radio test suites according to EN 300 328- 2 has been conducted. These are considered relevant and sufficient.
WL-520g Quick Reference Guide 8. Appendix (Cont.
WL-520g Quick Reference Guide 8. Appendix (Cont.