User Manual
Table Of Contents
- 目錄
- 安全性須知
- 限用物質名稱及含量列表
- 關於這本使用手冊
- WS C246M PRO/SE 規格列表
- 本主機板產品包裝
- 建立 PC 系統所需的其他工具與元件
- 第一章:產品介紹
- 第二章:硬體裝置資訊
- 第三章:BIOS 程式設定
- 3.1 管理、更新您的 BIOS 程式
- 3.2 BIOS 程式設定
- 3.3 主選單(Main)
- 3.4 進階選單(Advanced)
- 3.4.1 處理器設定(CPU Configuration)
- 3.4.2 電力與效能(Power & Performance)
- 3.4.3 Server ME 設定
- 3.4.4 Trusted Computing
- 3.4.5 ACPI 設定
- 3.4.6 APM Configuration
- 3.4.7 Runtime Error Logging Settings
- 3.4.8 Onboard LAN 設定
- 3.4.9 Serial Port Console Redirection(序列埠控制台重新導向)
- 3.4.10 Intel TXT Information(Intel TXT 資訊)
- 3.4.11 PCI Subsystem Settings(PCI 子系統設定)
- 3.4.12 USB Configuration(USB 設定)
- 3.4.13 網路堆疊設定
- 3.4.14 CSM 設定(CSM Configuration)
- 3.4.15 NVMe Configuration(NVMe 設定)
- 3.4.16 WHEA Configurations(WHEA 設定)
- 3.4.17 Tls Auth 設定(Tls Auth Configuration)
- 3.4.18 iSCSI 設定(iSCSI Configuration)
- 3.5 晶片組設定(Chipset Configuration)
- 3.6 Security Menu(安全選單)
- 3.7 啟動選單(Boot menu)
- 3.8 系統監控功能(Monitor)
- 3.9 工具選單(Tool)
- 3.10 事件記錄選單(Event Log menu)
- 3.11 伺服器管理選單(Sever Mgmt menu)
- 3.12 離開 BIOS 程式(Exit menu)
- 第四章:RAID 支援
- 附錄
ACPI/ASL 檢查表(於作業系統下)
Code Description
AC Reserved for ASL (see ASL Status Codes section below)
AD Ready To Boot event
AE Legacy Boot event
AF Exit Boot Services event
B0 Runtime Set Virtual Address MAP Begin
B1 Runtime Set Virtual Address MAP End
B2 Legacy Option ROM Initialization
B3 System Reset
B4 USB hot plug
B5 PCI bus hot plug
B6 Clean-up of NVRAM
B7 Configuration Reset (reset of NVRAM settings)
B8– BF Reserved for future AMI codes
D0 CPU initialization error
D1 System Agent initialization error
D2 PCH initialization error
D3 Some of the Architectural Protocols are not available
D4 PCI resource allocation error. Out of Resources
D5 No Space for Legacy Option ROM
D6 No Console Output Devices are found
D7 No Console Input Devices are found
D8 Invalid password
D9 Error loading Boot Option (LoadImage returned error)
DA Boot Option is failed (StartImage returned error)
DB Flash update is failed
DC Reset protocol is not available
Code Description
03 System is entering S3 sleep state
04 System is entering S4 sleep state
05 System is entering S5 sleep state
30 System is waking up from the S3 sleep state
40 System is waking up from the S4 sleep state
AC
System has transitioned into ACPI mode. Interrupt controller is in PIC
mode.
AA
System has transitioned into ACPI mode. Interrupt controller is in APIC
mode.