User Manual

4-2
Chapter 4: RAID Support
Chapter 4
4.1.2 Installingstoragedevices
The motherboard supports SATA hard disk drives and PCIe SSD storage devices. For
optimal performance, install identical drives of the same model and capacity when creating a
disk array.
Refer to Chapter 2 for details on installing storage devices to your motherboard.
4.1.3 Intel
®
RapidStorageTechnologyinUEFIBIOS
To enter the Intel
®
Rapid Storage Technology in UEFI BIOS:
1. Enter the BIOS Setup during POST.
2. Go to the Advanced menu > PCHStorageConguration, then press <Enter>.
3. Set the SATA Mode Selection item to [IntelRSTPremium(RAID)].
If you are using PCIe storage devices, ensure to enable all the PCIEStorageRAID
Support items.
4. Go to the Boot menu > CSM(CompatibilitySupportModule)> LaunchCSM, then
set the item to [Disabled].
5. Save your changes and exit the BIOS Setup, then enter the BIOS Setup again.
6. Go to the Advanced menu > Intel(R)RapidStorageTechnology, then press <Enter>
to display the Intel
®
Rapid Storage Technology menu.
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.
Due to chipset limitation, when SATA ports are set to RAID mode, all SATA ports run at
RAID mode together.