User Manual

4-6
Chapter 4: RAID Support
Chapter 4
4.1.4 Intel
®
VirtualRaidonCPUinUEFIBIOS
This feature requires a KEY module to enable CPU RAID functions with Intel
®
CPU RSTe.
• The KEY module is purchased separately.
• Due to CPU behavior, CPU RAID functions with Intel
®
CPU RSTe only supports Intel
®
Core™ X-series Processors (6-core or above) and Intel
®
SSD modules.
• Refer to section 1.1.9Internalconnectors for the location of the VROC_HW_KEY
connector.
• Due to hardware design, CPU RAID conguration as OS drives is only supported in
the following conguration sets and cannot be created across different sets:
[Set1] M.2_1, U.2_1, and U.2_2.
[Set2] PCIEX16_1 to PCIEX16_3 with Intel
®
P3500 or P3600 SSDs installed.
[Set3] PCIEX16_4 to PCIEX16_7 with Intel
®
P3500 or P3600 SSDs installed.
• Due to hardware design, RAID Volume between M.2_1 and M.2_2 is not supported.
To enter the Intel
®
Virtual Raid on CPU in UEFI BIOS:
1. Enter the BIOS Setup during POST.
2. Go to the Boot menu > CSM(CompatibilitySupportModule)> LaunchCSM, then
set the item to [Disabled].
3. Go to the Advanced menu > CPU Storage Conguration, then set the PCIe slot(s) that
you have installed the storage devices to [Enabled].