User Manual

30
ASUS X99 Series Feature Manual
ASUS Wi-Fi GO! card specifications
Bluetooth v4.0 Wi-Fi 802.11 a/b/g/n/ac version
Wi-Fi Standard
IEEE 802.11 a/b/g/n/ac
Bluetooth standard
Bluetooth v4.0
Data rate
3T3R
802.11ac(HT80*) up to 1300 Mbps, 802.11n(HT40*) up to 450 Mbps
802.11n(HT20) up to 225 Mbps, 802.11a up to 54 Mbps
802.11b up to 11 Mbps, 802.11g up to 54 Mbps
* When using Wi-Fi Engine in AP mode, the channel bandwidth is limited
to HT20, with a maximum data rate of 216.5 Mbps due to Windows
®
limitation.
2T2R
802.11ac(HT80*) up to 867 Mbps, 802.11n(HT40*) up to 300 Mbps
802.11n(HT20) up to 150 Mbps, 802.11a up to 54 Mbps
802.11b up to 11 Mbps, 802.11g up to 54 Mbps
* When using Wi-Fi Engine in AP mode, the channel bandwidth is limited to
HT20 with a maximum data rate of 150 Mbps due to Windows
®
limitation.
Security
WEP, WPA & WPA2*
* Use WPA2 or open system to reach 65Mbps and above.
Network architecture
types
AP Mode
Client mode
Frequency band
2.4GHz & 5GHz ISM radio band
Operating range
Wi-Fi*: Outdoor up to 300 meters, Indoor up to 100 meters
* The transmission speed may vary according to the environment
Bluetooth: 10 - 20 meters (depends on the environment)
Wi-Fi GO! Card
The Wi-Fi GO! card is an easy-to-use wireless LAN adapter that allows you to connect to a
wireless LAN in a single network. With the Wi-Fi GO! card, you can also use your system as
an access point for other Wi-Fi supported devices.
By default, the Wi-Fi GO! card is already installed on your motherboard. To locate the Wi-Fi
GO! card, refer to section Motherboard rear and audio connections of your motherboard’s
user guide.
The Wi-Fi standard of 802.11ac will be restricted by countries’ regulations. Wi-Fi 802.11ac
feature will be supported under the complete 11ac eco-system environment.
(continued on the next page)