User Manual

ASUS X99 Series Feature Manual

Using the Wake-on-LAN

If you want to wake up your computer using the smart device, ensure that you enable the

computer’s Wake-on-LAN settings.

To congure your computer’s Wake-on-LAN settings:

1. From BIOS Setup, go to Advanced > APM Configuration then set Power On By

PCI-E/PCI to [Enabled].

2. From Windows

OS, do the following:

a. On your desktop, click Start, right-click Computer > Manage to launch the

Computer Management screen.

b. Click Device Manager to view all the installed devices.

c. Click Network Adapters, right-click the installed module card (Broadcom or

Atheros) then click Properties > Power Management tab.

d. Tick these items Allow this device to wake up the computer and Only allow a

magic packet to wake the computer.

For 802.11ac standard Wi-Fi GO! Card, the Wake-on-LAN function will be supported in the

later version for Windows

8 and Windows

10 operating system.