User Guide

4-16
Chapter 4: Software Support
Chapter 4
Click to select a USB device
Click to enable the USB
device’s normal data
transfer rate
Click to enable UASP or
Turbo Mode to the USB
device for a faster data
transfer rate
4.4.9 USB 3.1 Boost
USB3.1BoosttechnologysupportsUASP(USBAttachedSCSIProtocol)thatautomatically
speedsupthetransferratesofyourUSBstoragedevices.
Launching USB 3.1 Boost on your computer
TolaunchUSB3.1Boost,clickortap onthetop-rightcorneroftheAISuite3mainmenu,
thenselectUSB 3.1 Boost.
Using the USB 3.1 Boost
• USB3.1BoostautomaticallydetectstheUSBdevicesthatsupportUASP.Foralistof
UASP-supportedUSBdevices,visittheASUSwebsiteatwww.asus.com.
• ThedatatransferspeedvarieswithUSBdevices.Forahigherdatatransfer
performance,useaUSB3.1device.
EnsuretoconnectyourUSB3.0or3.1devicetotheUSBportsthatsupportUSB3.1
Boost.Referto2.3.1Rear I/O connection section formoredetails.