User Guide

3-18
第三章：BIOS 程序設置
第三章
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
設置值有：[Auto] [1] – [7]
DRAM RAS# to RAS# Delay L [Auto]
設置值有：[Auto] [1] – [7]
DRAM REF Cycle Time [Auto]
設置值有：[Auto] [1] – [1023]
DRAM Refresh Interval [Auto]
設置值有：[Auto] [1] – [32767]
DRAM WRITE Recovery Time [Auto]
設置值有：[Auto] [1] – [31]
DRAM READ to PRE Time [Auto]
設置值有：[Auto] [1] – [15]
DRAM FOUR ACT WIN Time [Auto]
設置值有：[Auto] [1] – [63]
DRAM WRITE to READ Delay [Auto]
設置值有：[Auto] [1] – [15]
DRAM WRITE to READ Delay(tWTR_L) [Auto]
設置值有：[Auto] [1] – [15]
DRAM CKE Minimum Pulse Width [Auto]
設置值有：[Auto] [4] – [8]
DRAM Write Latency [Auto]
設置值有：[Auto] [1] – [31]
Primary Timings
DRAM CAS# Latency [Auto]
設置值有：[Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
設置值有：[Auto] [1] – [31]
DRAM RAS# PRE Time [Auto]
設置值有：[Auto] [1] – [31]
DRAM RAS# ACT Time [Auto]
設置值有：[Auto] [1] – [63]
DRAM Command Rate [Auto]
設置值有：[Auto] [Timing 1T] – [Timing 3T]