Xonar D1 7.1 Channels Sound Board Manual

ASUS Xonar D1

For other applications that support ASIO, such as WaveLab, Cubase, Reason,

Winamp, etc, the setup will be very similar to the above.

No Item Description

1 Audio Options

Step 1 is to open the “Audio Options” window from the

Options tab.

2 Driver Mode

Step 2 is to select “ASIO” as the driver mode in Advanced

tab. (WDM and MME are Windows driver types) The

changes will take effect after you restart the program next

time.

3 Playback Timing

Master

After step 2, Sonar LE will display 4 output drivers: “ASUS

Xonar D1 ASIO Out -00~06”. Make sure you are using 00 or

another one.

4 Recording Timing

Master

After step 2, Sonar LE will display 1 input driver: “ASUS

Xonar D1 ASIO In -00”. Make sure you are using it.

5 Sample Rate

Step 5 is to select the default le sample rate (44.1, 48, 96,

or 192KHz) for your Sonar project.

6 ASIO Panel

If you would like to congure bit-depth (16/24bit) and latency

(1ms~300ms) of the Xonar D1 ASIO driver, click this ASIO

panel to reset them. The changes will take effect the next

time you start the program.