User Guide
Table Of Contents
- ご注意
- Chapter 1: 製品の概要
- Chapter 2: ハードウェア
- Chapter 3: 電源のオン/オフ
- Chapter 4: BIOS
- 4.1 BIOSの管理と更新
- 4.2 BIOSセットアップユーティリティ
- 4.3 Main
- 4.4 AiTweaker
- 4.5 Advanced
- 4.5.1 ACPI Settings
- 4.5.2 SMART Settings
- 4.5.3 NCT6779D Super IO Configuration
- 4.5.4 Onboard LAN I210 Configuration
- 4.5.5 Serial Port Console Redirection
- 4.5.6 APM
- 4.5.7 Advanced Power Management Configuration
- 4.5.8 PCI Subsystem Settings
- 4.5.9 Network Stack Configuration
- 4.5.10 CSM Configuration
- 4.5.11 Trusted Computing
- 4.5.12 USB Configuration
- 4.5.13 ASMedia Storage Controller
- 4.6 IntelRCSetup
- 4.7 Server Mgmt
- 4.8 Event Logs
- 4.9 Monitor
- 4.10 Security
- 4.11 Boot
- 4.12 Tool
- 4.13 Exit
- Chapter 5: RAID
- Chapter 6: インストール
- Chapter7: 付録
4-36
Chapter 4: BIOS setup
Memory Map
Channel Interleaving [Auto]
CPUで、同時読み取り処理を可能にするために、メモリーブロックを分割しデータの
隣接する部分をインターリーブされたチャネル間で分散する機能を設定します。
設定オプション: [Auto] [1-way Interleave] [2-way Interleave] [3-way Interleave]
[4-way Interleave]
Rank Interleaving [Auto]
CPUで、1 つのランクの更新中に別のランクにアクセスできるように、メモリーの物
理ランクをインターリーブする機能を設定します。
設定オプション: [Auto] [1-way Interleave] [2-way Interleave] [4-way Interleave]
[8-way Interleave]
Memory RAS Conguration
RAS Mode [Disabled]
RASメモリーモードの有効/無効を設定します。
設定オプション: [Disabled] [Mirror] [Lockstep Mode]
Memory Rank Sparing [Disabled]
ランクスペアリングモードの有効/無効を設定します。
設定オプション: [Disabled] [Enabled]
Correctable Error Threshold [32767]
スペアリング、タギング、リーキーバケットの訂正可能なエラーのしきい値を設定します。
設定オプション:[0] - [32767]
Patrol Scrub [Enabled]
システムがサーバー上のメモリの未使用部分でも単一ビットメモリ
エラーをアクティブに探して訂正する機能の有効/無効を設定します。
設定オプション: [Disabled] [Enabled]
Demand Scrub [Enabled]
CPUまたはI/Oによるデマンドリードでメモリーの 1ビットエラーが見つかった場合に、シス
テムでエラーを訂正する機能の有効/無効を設定します。
設定オプション: [Disabled] [Enabled]