Specifications

2-38
Chapter 2: Hardware information
7. Serial ATA 6.0/3.0 Gb/s connectors (7-pin SATA_1-4 [gray], SSATA_1-4 [black])
TheseconnectorsarefortheSerialATAsignalcablesforSerialATAharddiskdrives
that allows up to 6 Gbps of data transfer rate.
IfyouinstalledSerialATAharddiskdrives,youcanuseasoftwareRAIDsolutionto
createaRAID0,RAID1,RAID5,oraRAID10conguration.Formoreinformation
ontheSATARAIDsolutionssupportedonthismotherboard,refertothe
RAID
Configuration
chapter of this user guide.