User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Powering Up
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 ACPI Settings
- 4.5.3 Smart Settings
- 4.5.4 Super IO Configuration
- 4.5.5 Serial Port Console Redirection
- 4.5.6 Onboard LAN Configuration
- 4.5.7 APM
- 4.5.8 PCI Subsystem Settings
- 4.5.9 USB Configuration
- 4.5.10 CSM Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 Network Stack Configuration
- 4.5.13 iSCSI Configuration
- 4.6 Platform Configuration menu
- 4.7 Socket Configuration menu
- 4.8 Event Logs menu
- 4.9 Server Mgmt menu
- 4.10 Security menu
- 4.11 Boot menu
- 4.12 Tool menu
- 4.13 Save & Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Intel® Optane™ DC Persistent Memory Configuration
- 6.1 Working with Intel® Optane™ DC persistent memory
- 6.1.1 DCPMM operating systems (OS) and virtual machine monitor (VMM)
- 6.1.2 Setting up Intel® Optane™ DC persistent memory as memory modules
- 6.1.3 Setting up Intel® Optane™ DC persistent memory as storage devices (Windows)
- 6.1.4 Removing Intel® Optane™ DC persistent memory as storage devices (Windows)
- 6.1.5 Setting up Intel® Optane™ DC persistent memory on other operating systems
- 6.1 Working with Intel® Optane™ DC persistent memory
- Chapter 7: Driver Installation
- 7.1 RAID driver installation
- 7.2 Management applications and utilities installation
- 7.3 Running the Support DVD
- 7.4 Intel® chipset device software installation
- 7.5 Installing the Intel® I210 Gigabit Adapters driver
- 7.6 VGA driver installation
- 7.7 Intel® Rapid Storage Technology enterprise 5.0 installation
- Appendix
5-14
Chapter 5: RAID Conguration
6. Conrm the volume creation, than click Create Volume to continue.
This process could take a while depending on the number and size of the disks. You can
continue using other applications during this time.
7. Wait until the process is completed, then click OK when prompted.
You still need to partition your new volume using Windows Disk Management before
adding any data.
The RAID set is displayed in the Volumes list and you can change the settings in
Volume Properties.