User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Powering Up
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 ACPI Settings
- 4.5.3 Smart Settings
- 4.5.4 Super IO Configuration
- 4.5.5 Serial Port Console Redirection
- 4.5.6 Onboard LAN Configuration
- 4.5.7 APM
- 4.5.8 PCI Subsystem Settings
- 4.5.9 USB Configuration
- 4.5.10 CSM Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 Network Stack Configuration
- 4.5.13 iSCSI Configuration
- 4.6 Platform Configuration menu
- 4.7 Socket Configuration menu
- 4.8 Event Logs menu
- 4.9 Server Mgmt menu
- 4.10 Security menu
- 4.11 Boot menu
- 4.12 Tool menu
- 4.13 Save & Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Intel® Optane™ DC Persistent Memory Configuration
- 6.1 Working with Intel® Optane™ DC persistent memory
- 6.1.1 DCPMM operating systems (OS) and virtual machine monitor (VMM)
- 6.1.2 Setting up Intel® Optane™ DC persistent memory as memory modules
- 6.1.3 Setting up Intel® Optane™ DC persistent memory as storage devices (Windows)
- 6.1.4 Removing Intel® Optane™ DC persistent memory as storage devices (Windows)
- 6.1.5 Setting up Intel® Optane™ DC persistent memory on other operating systems
- 6.1 Working with Intel® Optane™ DC persistent memory
- Chapter 7: Driver Installation
- 7.1 RAID driver installation
- 7.2 Management applications and utilities installation
- 7.3 Running the Support DVD
- 7.4 Intel® chipset device software installation
- 7.5 Installing the Intel® I210 Gigabit Adapters driver
- 7.6 VGA driver installation
- 7.7 Intel® Rapid Storage Technology enterprise 5.0 installation
- Appendix
5-18
Chapter 5: RAID Conguration
5.4 Intel
®
Virtual Raid on CPU in BIOS
This feature requires a KEY module to enable CPU RAID functions with Intel
®
CPU RSTe.
• The KEY module is purchased separately.
• Refer to section 2.8.2 Internal connectors for the location of the VROC_HW_KEY
connector.
Due to hardware design, your motherboard does not support CPU RAID congurations as
OS drives.
To enter the Intel
®
Virtual Raid on CPU in BIOS:
1. Enter the BIOS Setup during POST.
2. Go to the Advanced menu > Intel(R) Virtual Raid on CPU > All Intel VMD
Controllers then press <Enter> to display the Intel
®
Virtual Raid on CPU menu.
Refer to Chapter 4 for details on entering and navigating through the BIOS Setup.
Due to chipset limitation, when SATA ports are set to RAID mode, all SATA ports run at
RAID mode together.