User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Powering Up
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 ACPI Settings
- 4.5.3 Smart Settings
- 4.5.4 Super IO Configuration
- 4.5.5 Serial Port Console Redirection
- 4.5.6 Onboard LAN Configuration
- 4.5.7 APM
- 4.5.8 PCI Subsystem Settings
- 4.5.9 USB Configuration
- 4.5.10 CSM Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 Network Stack Configuration
- 4.5.13 iSCSI Configuration
- 4.6 Platform Configuration menu
- 4.7 Socket Configuration menu
- 4.8 Event Logs menu
- 4.9 Server Mgmt menu
- 4.10 Security menu
- 4.11 Boot menu
- 4.12 Tool menu
- 4.13 Save & Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Intel® Optane™ DC Persistent Memory Configuration
- 6.1 Working with Intel® Optane™ DC persistent memory
- 6.1.1 DCPMM operating systems (OS) and virtual machine monitor (VMM)
- 6.1.2 Setting up Intel® Optane™ DC persistent memory as memory modules
- 6.1.3 Setting up Intel® Optane™ DC persistent memory as storage devices (Windows)
- 6.1.4 Removing Intel® Optane™ DC persistent memory as storage devices (Windows)
- 6.1.5 Setting up Intel® Optane™ DC persistent memory on other operating systems
- 6.1 Working with Intel® Optane™ DC persistent memory
- Chapter 7: Driver Installation
- 7.1 RAID driver installation
- 7.2 Management applications and utilities installation
- 7.3 Running the Support DVD
- 7.4 Intel® chipset device software installation
- 7.5 Installing the Intel® I210 Gigabit Adapters driver
- 7.6 VGA driver installation
- 7.7 Intel® Rapid Storage Technology enterprise 5.0 installation
- Appendix
5-19
Z11PA-D8 Series
5.4.1 Creating a RAID set
To create a RAID set:
1. From the Intel
®
Virtual Raid on CPU menu, select Create RAID Volume and press
<Enter>. The following screen appears:
2. When the Name item is selected, enter a name for the RAID set and press <Enter>.
3. When the RAID Level item is selected, press <Enter> to select the RAID level to
create, and then press <Enter>.
4. When the Enable RAID spanned over VMD Controllers item is selected, press
<Enter> and select X to enable this function.
5. Under Select Disks, press <Enter> and select X for the disks you want to include in the
RAID set.
6. When the Strip Size item is selected, press <Enter> to select strip size for the RAID
array (for RAID 0, 10 and 5 only), and then press <Enter>. The available strip size
values range from 4 KB to 128 KB. The following are typical values:
- RAID 0: 128 KB
- RAID 10: 64 KB
- RAID 5: 64 KB
We recommend a lower strip size for server systems, and a higher strip size for multimedia
computer systems used mainly for audio and video editing.