User Manual

2-7
Z11PA-D8 Series
3. AlignthetrianglemarkontheCPUwith
thetrianglemarkontheCPUCarrier
(A),theninstalltheCPUintotheCPU
Carrieruntilitclicksrmlyintoplace(B),
andtheninstalltheCPUCarrierintothe
heatsinkuntilitclicksrmlyinplace(C).
Ensure that the triangle mark on the
CPUmatchesthetrianglemarkon
theCPUCarrier.
CPU Carrier
2
CPU
Triangle mark
4. AligntheCPUandCPUCarrierinthecorrectorientation,andthenplacetheheatsinks
ontopoftheCPUsockets.
TheCPUandCPUCarriertsinonlyonecorrectorientation.DONOTforcetheCPUand
CPUCarrierintothesockettopreventdamagingtheCPUpinsonthesocket.
5. Twist each of the four screws with a screwdriver just enough to attach the heatsink to
themotherboard.Whenthefourscrewsareattached,tightenthemonebyoneina
diagonal sequence to completely secure the heatsink.
The heatsink screws are T30 models. A torque value of 12 inch-lbf is recommended.