使用手冊 Motherboard GRYPHON Z87
T7870 1.00 版 2013 年 5 月發行 版權說明 © ASUSTeK Computer Inc. All rights reserved.
Offer to Provide Source Code of Certain Software This product may contain copyrighted software that is licensed under the General Public License (“GPL”) and under the Lesser General Public License Version (“LGPL”). The GPL and LGPL licensed code in this product is distributed without any warranty. Copies of these licenses are included in this product.
目錄內容 目錄內容............................................................................................................................................. iv 安全性須知.......................................................................................................................................vii 電氣方面的安全性.............................................................................................................vii 操作方面的安全性.....................................................................................
目錄內容 2.2 2.3 2.4 2.5 2.1.7 安裝前面板輸出/輸入連接埠........................................................................... 2-9 2.1.8 安裝擴充卡............................................................................................................2-10 BIOS 更新應用程式...........................................................................................................2-11 主機板後側與音效連接埠...............................................................................................2-13 2.3.1 後側面板連接埠..................
目錄內容 4.2.1 執行驅動及公用程式 DVD 光碟..................................................................... 4-1 4.2.2 取得軟體使用手冊................................................................................................ 4-3 4.3 軟體資訊.................................................................................................................................. 4-4 4.3.1 華碩 AI Suite 3 程式........................................................................................... 4-4 4.3.2 Thermal Rader 2(熱敏雷達 2)程式....
安全性須知 電氣方面的安全性 • 為避免可能的電擊造成嚴重損害,在搬動電腦主機之前,請先將電腦電源線暫時 從電源插槽中拔掉。 • 當您要加入硬體裝置到系統中時,請務必先連接該裝置的訊號線,然後再連接電 源線。可能的話,在安裝硬體裝置之前先拔掉電腦的電源供應器電源線。 • 當您要從主機板連接或拔除任何的訊號線之前,請確定所有的電源線已事先拔 掉。 • 在使用介面卡或擴充卡之前,我們建議您可以先尋求專業人士的協助。這些裝置 有可能會干擾接地的迴路。 • 請確定電源供應器的電壓設定已調整到本國/本區域所使用的電壓標準值。若您不 確定您所屬區域的供應電壓值為何,請就近詢問當地的電力公司人員。 • 如果電源供應器已損壞,請不要嘗試自行修復。請將之交給專業技術服務人員或 經銷商來處理。 操作方面的安全性 • 在您安裝主機板以及加入硬體裝置之前,請務必詳加閱讀本手冊所提供的相關資 訊。 • 在使用產品之前,請確定所有的排線、電源線都已正確地連接好。若您發現有任 何重大的瑕疵,請儘速聯絡您的經銷商。 • 為避免發生電氣短路情形,請務必將所有沒用到的螺絲、迴紋針及其他零件收 好,不要遺留在主機板上或電腦主機中。 •
關於這本用戶手冊 產品用戶手冊包含了所有當您在安裝華碩 GRYPHON Z87 主機板時所需用到的資 訊。 用戶手冊的編排方式 用戶手冊是由下面幾個章節所組成: • 第一章:產品介紹 您可以在本章節中發現諸多華碩所賦予本主機板的優異特色。利用簡潔易懂的 說明讓您能很快地掌握本主機板的各項特性,當然,在本章節中我們也會提及所 有能夠應用在本主機板的新產品技術。 • 第二章:硬體裝置資訊 本章節描述所有您在安裝系統元件時必須完成的硬體安裝程序。詳細內容有: 處理器與記憶體安裝、跳線選擇區設定以及主機板的各種裝置接頭。 • 第三章:BIOS 程式設定 本章節描述如何使用 BIOS 設定程式中的每一個選單項目來更改系統的組態設 定。此外也會詳加介紹 BIOS 各項設定值的使用時機與參數設定。 • 第四章:軟體支援 您可以在本章節中找到所有包含在華碩驅動程式及公用程式光碟中的軟體相關 資訊。 • 第五章:RAID 支援 本章節介紹 RAID 的各項設定。 viii
提示符號 為了能夠確保您正確地完成主機板設定,請務必注意下面這些會在本手冊中出現的 標示符號所代表的特殊含意。 警告:提醒您在進行某一項工作時要注意您本身的安全。 小心:提醒您在進行某一項工作時要注意勿傷害到電腦主機板元件。 要:此符號表示您必須要遵照手冊所描述之方式完成一項或多項軟硬體 重 的安裝或設定。 注意:提供有助於完成某項工作的訣竅和其他額外的資訊。 跳線帽及圖示說明 主機板上有一些小小的塑膠套,裡面有金屬導線,可以套住選擇區的任二隻針腳 (Pin)使其相連而成一通路(短路),本手冊稱之為跳線帽。 有關主機板的跳線帽使用設定,茲利用以下圖示說明。以下圖為例,欲設定為 「Jumper™ Mode」,需在選擇區的第一及第二隻針腳部份蓋上跳線帽,本手冊圖示 即以塗上底色代表蓋上跳線帽的位置,而空白的部份則代表空接針。以文字表示為: [1-2]。 因此,欲設定為「JumperFree™ Mode」,以右圖表 示即為在「第二及第三隻針腳部份蓋上跳線帽」,以 文字表示即為:[2-3]。 1 2 Jumper Mode 2 3 Jumper Free (Default) 哪裡可以找到更多的產品資
代理商查詢 華碩主機板在台灣透過聯強國際與精技電腦兩家代理商出貨,您請參考下列範例 圖示找出產品的 12 碼式序號標籤(下圖僅供參考),再至 http://tw.asus.com/support/ eService/querydist_tw.
GRYPHON Z87 規格列表 ® 中央處理器 支 援採用 LGA1150 規格插槽的 Intel Core™ i7/Core™ i5/Core™ ® ® i3�������� 、������� Pentium ��������� 和 Celeron ������� 處理器 支援 22nm 處理器 ® 支援 Intel Turbo Boost 2.0 技術 ® * 對 Intel Turbo Boost 2.0 技術的支援依照處理器的類型而不同 晶片組 Intel Z87 Express 晶片組 記憶體 4 x 使用符合 non-ECC unbuffered DDR3 1866/1600/1333/ 1066 MHz 記憶體,最高可以擴充至 32GB 記憶體 支援雙通道記憶體架構 ® 支援 Intel Extreme Memory Profile(XMP)技術 * 對高速記憶體的支援會受到特定處理器之物理特性的影響, 請造訪 t w.a s u s.c o m 取得最新的記憶體合格供應商支援列表 (QVL) 擴充槽 2 x PCI Express 3.0/2.
GRYPHON Z87 規格列表 ® 音效功能 Realtek ALC892 8 聲道高傳真音效編碼器 CODEC - Absolute Pitch 192khz/24bit 真正藍光無失真音效 - 藍光光碟音效內容保護 - 支援音效介面偵測、多音源獨立輸出(Multi-Streaming ) 技術與前端面板音效插孔功能 - 後側面板具備光纖 S/PDIF 數位輸出連接埠 USB Intel Z87 Express 晶片組 - 支援華碩 USB 3.0 Boost - 6 x USB 3.0/2.0 連接埠(2 埠在主機板中央,4 埠在主機板 後側面板) - 8 x USB 2.0/1.
GRYPHON Z87 規格列表 其他特殊功能 USB 3.0 Boost 功能提供 USB 3.0 傳輸速度�� 加速 USB BIOS Flashback USB Charger+ 華碩 UEFI BIOS EZ Mode 功能,提供友善的圖形使用者介面 AI Suite 3 Remote GO! 華碩 Q-Connector 華碩 Q-Shield 華碩 Q-LED(處理器、記憶體、VGA、開機裝置指示燈) 華碩 Q-Slot 華碩 Q-DIMM 華碩 O.C. Profile 華碩 CrashFree BIOS 3 EZ Update Disk Unlocker 華碩 EZ Flash 2 華碩 MyLogo 2 多國語言 BIOS 內建 I/O 裝置連接埠 1 x USB 3.0/2.0 連接埠可擴充 2 組 USB 連接埠(苔綠色) 2 x USB 2.0/1.1 連接埠可擴充 4 組 USB 2.0/1.1 連接埠 6 x SATA 6.
GRYPHON Z87 規格列表 BIOS 功能 64Mb Flash ROM、UEFI AMI BIOS、PnP、DMI 2.7、WfM 2.0、S M B I O S 2.7、A C P I 5.0、多國語言 B I O S 程式、 ASUS EZ Flash 2 程式、ASUS CrashFree BIOS 3 程式、My Favorites、Quick Note、Last Modified Log、F12 PrintScreen 功能、F3 Shortcut 功能、ASUS DRAM SPD(Serial Presence Detect)記憶體資訊 管理功能 WfM 2.0、DMI 2.7、網路喚醒功能(WOL by PME)、PXE 公用程式 DVD 光碟 驅動程式 防毒軟體(OEM 版本) Network iControl 功能 華碩公用程式 主機板尺寸 mATX 型式:9.6 x 9.6 英吋(24.4 x 24.
產品包裝 nual User Ma 華碩� GRYPHON ����������� Z87 主機板 ��� 用戶手冊、認證和保固卡 驅動程式與公用程式 DVD 光碟 �� 4 x Serial ATA 6.
安裝工具與配件 一袋螺絲 Philips (���� 十字��) 螺絲起子 ���� PC 機殼 �� 電源供應裝置 Intel LGA 1150 處理器 ��� Intel LGA 1150 相容處理器風扇 ������� 記憶體模組 SATA 硬碟 �� SATA 光碟機(選購) ������� 顯示卡(選購) 上表所列的工具與元件並不包含在主機板包裝盒內。 xvi
第一章 1.1 特殊功能 1.1.1 產品特寫 ® ® 支援� LGA1150 �������� ������� 規格的第四代� ����� Intel Core™ i7/Core™ i5/Core™ i3�������� 、������� Pentium ® /Celeron 處理器 ��� ® ® 本主機板支援最新� LGA1150 �������� ������� 封裝的第四代� ����� Intel Core™ i7/i5/i3�������� 、������� Pentium ® /Celeron 處理器,並透過� �������� GPU����� �������� 、雙通道� DDR3 ����� 記憶體插槽與� ������� PCI ���� Express �������� 2.0/3.
® Intel Smart Response Technology 功能 ® 第一章 Intel Smart Response Technology 用來提升整個系統效能,透過已經安裝的高速 SSD(最小空間需為 18.
1.1.4 “Safe & Stable!” 防護設備 ESD Guards 第一章 靜電放電(ESD,Electrostatic Discharge)防護功能提供主機板元件免於受到靜電 放電的損害。華碩獨家的靜電防護晶片與電路設計以及 I/O 擋板,可以提供四倍的保 護,並確保主機板的使用壽命。 MemOK! MemOK! 是目前最快速的記憶體啟動解決方案。這個卓越的記憶體救援工具只需要 按一下按鈕就可以解決記憶體問題,並同時讓系統開機。這項技術可以判斷故障安全 防護裝置設定,並且可以大幅度的增進系統開機的成功率。 1.1.5 華碩 EZ DIY 華碩 UEFI BIOS(EZ Mode) 華碩 UEFI BIOS 程式提供可由滑鼠控制操作的友善的圖像化介面,在������ 超越傳統鍵盤 的 BIOS 控制,為您提供更多的靈活性、方便性與易於瀏覽 UEFI BIOS,相較傳統的 BIOS 版本,可以提供您雙選擇模式和支援原生大於 2.
1.1.6 華碩獨家功能 USB 3.0 Boost 第一章 華碩 USB 3.0 Boost 技術支援 USB 3.0 標準 UASP(USB Attached SCSI Protocol, USB 附加 SCSI 通訊協定)傳輸協定,搭載 USB 3.0 Boost 技術,USB 裝置的傳輸速 度可增至 170%,進一步提升已令人印象深刻的 USB 3.0 傳輸速度。不需要使用者特 殊設定,USB 3.0 Boost 會自動加速 USB 3.
1.2 主機板概觀 1.2.
1.2.2 主機板結構圖 第一章 關於面板連接插座與內部連接插座的相關資訊,請參考 1.2.9 內部連接埠� ������ 與 2.3.
主機板元件說明 頁數 1. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) 1-33 2. CPU, CPU optional, chassis, and assistant fan connectors (4-pin CPU_FAN; 4-pin CPU_OPT; 4-pin CHA_FAN1-4; 3-pin ASST_FAN) 1-31 3. LGA1150 CPU socket 1-8 4. DDR3 DIMM slots 1-9 5. MemOK! button 1-24 6. USB 3.0 connector (20-1 pin USB3_12) 1-29 7. Intel Z87 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-6 [brown]) 1-28 8. System panel connector (20-8 pin PANEL) 1-34 9.
1.2.
1.2.
記憶體設定 您可以任意選擇使用 2GB����� 、���� 4GB 與 �� 8GB ������ 的 unbuffered ����������� non-ECC �������� DDR3 ����� 記憶體模組 ����� 至本主機板的記憶體插槽上。 第一章 • 您可以在 Channel A、Channel B 安裝不同容量的記憶體模組,在雙通 道設定中,系統會偵測較低容量通道的記憶體容量。任何在較高容量 通道的其他記憶體容量,會被偵測為單通道模式執行。 • 根據 Intel 處理器規格,建議記憶體電壓低於 1.
GRYPHON Z87 主機板合格供應商列表(QVL) DDR3 2800 MHz(超頻) 型號 容量 SS/ DS 晶片 廠牌 晶片 型號 時脈 電壓 1 2 4 G.SKILL F3-2800C11Q-16GTXD(XMP) 16GB (4x4GB) DS - - 11-13-13-35 1.65 • • • G.SKILL F3-2800C12Q-32GTXD(XMP) 32GB (4x8GB) DS - - 12-13-13-35 1.65 • • • G.SKILL F3-2800C12Q-32GTXDG(XMP) 32GB (4x8GB) DS - - 12-14-14-35 1.65 • • • APACER 78.BAGH5.AFD0C 8GB (2x4GB) DS - - 12-14-14-35 1.65 • • APACER 78.CAGH6.AFD0C 16GB (2x8GB) DS - - 12-14-14-35 1.
DDR3 2400 MHz(超頻) 支援記憶體插槽 (選購) 第一章 供應商 型號 容量 SS/ DS 晶片 廠牌 晶片 型號 時脈 電壓 1 2 4 A-DATA AX3U2400GC4G10(XMP) 4GB DS - - 10-12-12-31 1.65 • • • Apacer 78.BAGFL.AFD0C(XMP) 8GB (2x4GB) DS - - 11-12-12-30 - • • • Apacer 783BAGF3.AFD0C(XMP) 8GB (2x4GB) DS - - 11-11-11-30 - • • • CORSAIR CMGTX8(XMP) 8GB (4x2GB) SS - - 10-12-10-30 1.65 • • • CORSAIR CMZ16GX3M2A2400C10 (Ver4.21) 16GB (2x8GB) DS - - 10-12-12-31 1.
DDR3 2133 MHz(超頻) 型號 容量 SS/ DS 晶片 廠牌 晶片 型號 時脈 電壓 1 2 4 A-DATA AX3U2133XC4G10(XMP) 4GB DS - - 10-11-11-30 1.65 • • • A-DATA AX3U2133XW8G10(XMP) 8GB DS - - 10-11-11-30 1.65 • • • Apacer 78.BAGE4.AFD0C(XMP) 8GB (2x4GB) DS - - 9-9-9-24 - • • • Apacer AHU04GFB33CAQ3R(XMP) 4GB DS - - 11-13-13-31 - • • • CORSAIR CMD8GX3M2A2133C9 (Ver1.5)(XMP) 8GB (2x4GB) DS - - 9-11-10-27 1.5 • • • CORSAIR CMT4GX3M2B2133C9(Ver 7.
DDR3 2000 MHz(超頻) 支援記憶體插槽 (選購) 第一章 供應商 型號 容量 SS/ DS 晶片 廠牌 晶片型號 時脈 電壓 1 2 4 AEXEA AXA3ES2G2000LG28V(XMP) 2GB DS - - - 1.65 • • • AEXEA AXA3ES4GK2000LG28V(XMP) 4GB (2x2GB) DS - - - 1.65 • • • Apacer 78.AAGD5.9KD(XMP) 6GB (3x2GB) DS - - 9-9-9-27 - • • • Asint SLA302G08-ML2HB(XMP) 4GB DS Hynix H5TQ2G83BF RH9C 9-9-9-27 - • • • G.SKILL F3-16000CL9D-4GBRH(XMP) 4GB (2x2GB) DS - - 9-9-9-24 1.65 • • G.
DDR3 1866 MHz 支援記憶體插槽 (選購) 供應商 型號 容量 SS/ DS 晶片 廠牌 晶片 型號 時脈 電壓 1 2 CORSAIR CMZ8GX3M2A1866C9(XMP) 8GB (2x4GB) DS - - 9-10-9-27 1.5 • • CORSAIR CMZ8GX3M2A1866C9G (Ver5.12)(XMP) 8GB (2x4GB) DS - - 1866 9-10-9-27 1.5 • • • Crucial BLE4G3D1869DE1XT0.16F MD(XMP) 4GB DS - - 9-9-9-27 1.5 • • • G.SKILL F3-14900CL10Q264GBZLD(XMP) 64GB (8x8GB) DS - - 10-11-10-30 1.5 • • • G.SKILL F3-14900CL9D-8GBSR(XMP) 8GB (2x4GB) DS - - 9-10-9-28 1.5 • • • G.
DDR3 1600 MHz 支援記憶體插槽 (選購) 第一章 供應商 型號 容量 SS/ DS 晶片廠牌 晶片型號 時脈 電壓 1 2 4 Apacer 78.C1GET.9K10C 8GB DS Apacer AM5D6008 BQQSCK 11-1111-31 - • • • Apacer AHU04GFA60C9Q1D(XMP) 4GB DS - - 9-9-9-27 1.
DDR3 1600 MHz 型號 容量 SS/ DS 晶片廠牌 晶片型號 時脈 電壓 1 2 4 EK Memory EKM324L28BP8I16(XMP) 4GB (2x2GB) DS - - 9 - • • • EK Memory EKM324L28BP8I16(XMP) 4GB (2x2GB) DS - - 9 - • • • Elixir M2X2G64CB88 G7NDG(XMP) 2GB SS Elixir N2CB2G80GNDG 9-9-9-28 - • • • Elixir M2X4G64CB8HG 5N-DG(XMP) 4GB DS Elixir N2CB2G80GNDG 9-9-9-28 - • • • Elixir M2X8G64CB8HB 5N-DG(XMP) 8GB DS Elixir N2CB4G80BNDG 9-9-9-28 1.5 • • G.
DDR3 1600 MHz 支援記憶體插槽 (選購) 第一章 供應商 型號 容量 SS/ DS 晶片廠牌 晶片型號 時脈 電壓 1 2 4 KINGSTON KHX16C10B1K2/ 16X(XMP) 16GB (2x8GB) DS - - - 1.5 • • • KINGSTON KHX16C9K2/16 16GB (2x8GB) DS - - 1333-99-9-24 1.5 • • KINGSTON KHX16C9P1K2/16 16GB (2x8GB) DS - - - 1.5 • • • KINGSTON KVR16N11/4 4G DS Hynix H5TQ2G83CFRPBC - 1.5 • • • KINGTIGER KTG2G1600PG3(XMP) 2GB DS - - - - • • • MICRON MT16JTF1G64AZ1G6D1 8GB DS MICRON D9PBC - 1.
DDR3 1333 MHz 型號 容量 SS/ DS 晶片廠牌 晶片型號 時脈 電壓 1 2 4 ACTICA ACT1GHU64B 8F1333S 1GB SS SAMSUNG K4B1G0846F - - • • • ACTICA ACT1GHU72C 8G1333S 1GB SS SAMSUNG K4B1G0846F(ECC) - - • • • ACTICA ACT2GHU64B 8G1333M 2GB DS Micron D9KPT - - • • • ACTICA ACT2GHU64B 8G1333S 2GB DS SAMSUNG K4B1G0846F - - • • • ACTICA ACT2GHU72D 8G1333M 2GB DS Micron D9KPT(ECC) - - • • • ACTICA ACT2GHU72D8 G1333S 2GB DS SAMSUNG K4B1G0846F(ECC) - - • • • ACTICA ACT4
DDR3 1333 MHz 第一章 供應商 型號 容量 SS/ DS 晶片廠牌 晶片型號 時脈 電壓 支援記憶體插槽 (選購) 1 2 4 G.SKILL F3-10666CL9D8GBRL 8GB (2x4GB) DS - - 9-9-9-24 1.5 • • • G.SKILL F3-10666CL9D8GBXL 8GB (2x4GB) DS - - 9-9-9-24 1.5 • • • GEIL GB34GB1333C7DC 4GB (2x2GB) DS GEIL GL1L128M8 8BA15FW 7-7-7-24 1.5 • • • GEIL GET316GB1333 C9QC 16GB (4x4GB) DS - - 9-9-9-24 1.5 • • • GEIL GG34GB1333C 9DC 4GB (2x2GB) DS GEIL GL1L128M8 8BA115FW 9-9-9-24 1.
DDR3 1333 MHz 供應商 型號 容量 SS/ DS 晶片廠牌 晶片型號 時脈 電壓 支援記憶體插槽 (選購) 1 2 OCZ OCZ3G1333L V4GK 4GB (2x2GB) DS - - 9-9-9 1.65 • • OCZ OCZ3G1333L V8GK 8GB (2x4GB) DS - - 9-9-9 1.65 • • OCZ OCZ3G1333L V8GK 8GB (2x4GB) DS - - 9-9-9 1.65 • • 第一章 4 OCZ OCZ3RPR1333 C9LV8GK 8GB (2x4GB) DS - - 9-9-9 1.65 • • Patriot PG38G1333EL (XMP) 8GB DS - - - 1.5 • • • Patriot PGD316G1333 ELK(XMP) 16GB (2x8GB) DS - - 9-9-9-24 1.
1.2.5 擴充插槽 安裝����������������������������� 或���������������������������� 移��������������������������� 除任何擴充卡之前,請暫時先將電腦的電源線拔出。如此可免 除因電氣殘留於電腦中而發生的意外狀況。 第一章 插槽編號 插槽說明 1 PCIe 3.0/2.0 x16_1 插槽 2 PCIe 2.0 x1_1 插槽 3 PCIe 3.0/2.0 x16_2 插槽 4 PCIe 2.
PCI Express 3.0 運作模式� ����� PCIe 3.0/2.0 x16_1 一張� ������������ VGA/PCIe 顯示卡 ��� PCIe 3.0/2.
1.2.6 主機板上的內建按鈕與開關 當您想要針對未安裝在機殼的裸板或是開放機殼的系統作效能調校時,主機板上內 建的按鈕與開關可以方便您迅速地開關機或是重置系統。這是想要不斷變更設定以提 升系統效能的超頻者和玩家最理想的設定方式。 第一章 1. MemOK! 按鈕 �� 在主機板上安裝不相容的記憶體模組可�������������������� 能������������������� 會導致開機失敗,而且在 MemOK � 按 鈕��� 旁的 DRAM_LED ���������������������� 指示燈也會一直亮著。按住 MemOK! ������������ ����� 按鈕��� 直到 ���������� DRAM_LED 指 示燈開始閃爍,即開始自動將記憶體調整為相容直到成功開機。 • 請參考 1.2.
2. DirectKey 按鈕 第一章 這個按鈕用來讓使用者在按下按鈕後直接進入 BIOS 程式設定。透過 DirectKey 按鈕,您可以不需要在開機自我�������������������������� 偵������������������������� 測������������������������ (POST)������������������ 過程中按下 ,在任何時候皆 可進入 BIOS 程式設定;也可以讓您在開機過程中,啟動或關閉系統,並輕鬆的 進入 BIOS 程式。 使用 DirectKey 按鈕之前,請先確認您的資料已經儲存。 • 當系統正在運作時按下 DirectKey 按鈕,系統可能會關閉。再按一次 本按鈕或是開機按鈕來重新開機,並直接進入 BIOS 程式設定。 • 請使用開機按鈕來關閉系統,����������������� 以讓��������������� 重新啟動系統時執行開機自我偵測 (POST)程序(不進入 BIOS 程式)。 • 請參考 3.
1.2.7 跳線選擇區 CMOS 組態資料清除(3-pin CLRTC) 第一章 在主機板上的 CMOS 記憶體中記載著正確的時間與系統硬體組態等資料,這些資 料並不會因電腦電源的關閉而遺失資料與時間的正確性,因為這個 CMOS 的電源是 由主機板上的鋰電池所供應。 想要清除這些資料,可以依照下列步驟進行: 1. 關閉電腦電源,拔掉電源線; 2. 將 CLRTC 跳線帽由 [1-2](預設值)改為 [2-3] 約五∼十秒鐘(此時即清 除 CMOS 資料),然後再將跳線帽改回 [1-2]。 3. 插上電源線,開啟電腦電源。 4.
1.2.8 內建 LED 指示燈 POST 狀態指示燈用來在主機板開機過程中依序檢查重要元件������� ,������ 包括處理器、 記憶體、VGA 顯示卡與硬碟,若是出現錯誤,在出現問題裝置旁的指示燈會持續 亮著,直到問題解決才會熄滅。這個和善的設計讓您可以在一秒內,直覺式的找 到問題所在的位置。 2. 電力警示燈 ����� 當主機板上內置的電力指示燈亮著時,表示目前系統是處於正常運作、省電模式或 者軟關機的狀態中,並非完全斷電。這個警示燈可用來提醒您在置入或移除任何的硬 體裝置之前,都必須先移除電源,等待警示燈熄滅才可進行。請參考下圖所示。 華碩� GRYPHON �������� Z87 ���� 主機板使用手冊 ������� 1-27 第一章 1.
1.2.9 內部連接埠 ® 1. Intel Z87 Serial ATA 6.0 Gb/s 裝置連接�������������������� ������������������������ 插槽������������������ (����������������� 7-pin SATA6G_1-6 [����� ������ 咖啡色�� ]� ) 這些插槽可������������� 以������������ 支����������� 援���������� 使用 Serial ATA �������� 6.0 ������������������ Gb/s 排線來連接 Serial ATA �������� 6.
2. USB 3.0 連接插槽(20-1 pin USB3_34) 第一章 這個插槽用來連接 USB 3.0 模組,可在前面板或後側連接埠擴充 USB 3.0 模 組。當您安裝 USB 3.0 模組,您可以享受 USB 3.0 的益處,包括有更快的資料傳 輸率最高達 5Gbps、對可充電的 USB 裝置更快的充電速度、最佳化能源效率,以 及與 USB 2.0 向下相容。 • USB 3.0 模組為選購配備,請另行購買。 ® • 這������ 些����� 插槽是以 xHCI ����������������������� 規格為基礎,建議您在 Windows 7������ 作業系統中 ����� 安裝相關的驅動程式������ 以完整��� 使用 USB �������� 3.0 埠� �� 。 3.
4. USB 2.0 連接插槽(10-1 pin USB1112, USB1314) 這些 USB 擴充套件排線插槽支援 USB 2.0 規格,將 USB 模組排線連接至任 何一個插槽,然後將模組安裝到機殼後側面板中開放的插槽。這些 USB 插槽與 USB 2.0 規格相容,並支援傳輸速率最高達 480 Mbps。 第一章 請勿將 1394 排線連接到 U S B 插槽上,這麼做可能會導致主機板的損 毀。 若是您的機殼擁有前面板 USB 連接埠,您可以將前面板 USB 排線連接至 ASUS Q-Connector(USB,卡其色),然後將 Q-Connector(USB)安裝 至主機板內建的 USB 插槽上。 USB 2.
5.
6. 前面板音效連接排針(10-1 pin AAFP) 這組音效外接排針供您連接到前面板的音效排線,除了讓您可以輕鬆地通過 主機前面板來控制音效輸入/輸出等功能,並且支援 AC’97 或 HD Audio 音效標 準。將前面板音效輸出/輸入模組的連接排線之一端連接到這個插槽上。 第一章 • 建議您將支援高傳真(high definition)音效的前面板音效模組連接 到這組排針,如此才能獲得高傳真音效的功能。 • 若������������������������ 是����������������������� 要將高傳真音效前面板模組安裝至本接針,請將 B I� O ������� S 程式中 Front Panel Type 項目設定為 [HD];若要將 AC 97 音效前面版模組 安裝至本接針,請將 BIOS 程式設定為 [HD] 或� �� [AC97]。 7.
8. 主機板電源插槽(24-pin EATXPWR, 8-pin EATX12V) 第一章 這些電源插槽用來連接一個 A T X +12V 電源。電源所提供的連接插頭已經過 特別設計,只能以一個特定方向插入主機板上的電源插槽。找到正確的插入方向 後,僅需穩穩地將之套進插槽中即可。 • 建議您使用與 2.0 規格的 24-pin ATX 12V 相容的電源(PSU),才 能提供至少 350W 高功率的電源,以供應系統足夠的電源需求。 • 請務必連接 4-pin/8-pin EATX12V 電源插頭,否則系統可能無法順利 啟動。 ‧ 如果您想要安裝其他的硬體裝置,請務必使用較高功率的電源以提供 足夠的裝置用電需求。若電源無法提供裝置足夠的用電需求,則系統 將會變得不穩定或無法開啟。 ‧ 若是您想要安裝二張或更多的高階 PCI Express x16 顯示卡,請使用 1000 瓦以上的電源以確保執行穩定。 ‧ 如 果 您 不 確 定 系 統 所 要 求 的 最 小 電 源 供 應 值 為 何 , 請 至 華 碩 技 術支援網頁中的電源瓦數建議值計算 h ttp://supp o r t.a sus.
9.
10. TPM 插座�������������� (������������� 20-1 pin TPM� ) 第一章 這個插座支援可信任安全平台模組(T P M)系統,用來安全地儲存金鑰、數 位認證、密碼和資料。可信任安全平台模組(TPM)系統也用來協助加強網路安 全,保護數位身分,以及確保平台的安全性。 11.
第一章 1-36 第一章:產品介紹
第二章 2.1 建立您的電腦系統 2.1.1 安裝主機板 本章節的圖示僅供參考,主機板的構造可能會隨著型號而有所不同,但 是安裝的步驟仍然是相同的。 1. 安裝華碩 Q-Shield 擋板至機殼的後側 I/O 面板。 2.
3.
2.1.
2.1.
第二章 取出散熱片與風扇 華碩� GRYPHON �������� Z87 ���� 主機板使用手冊 ������� 2-5
2.1.
第二章 2.1.
2.1.
2.1.7 安裝前面板輸出/輸入連接埠 ������������� PWR Ground Reset Ground HDD LED POWE R SW RESET SW 安裝 USB 2.0 連接插槽 第二章 HDD LED+ HDD LED- HDD LED 安裝 ASUS Q-Connector 安裝前面板音效連接插槽 AAFP USB 2.0 安裝 USB 3.0 連接插槽 USB 3.
2.1.
2.2 BIOS 更新應用程式 USB BIOS Flashback 請依照以下步驟使用 USB BIOS Flashback: 1. 將包裝盒內附的驅動程式與應用程式 DVD 光碟放入光碟機,然後安裝 ����������������� ���� ���������������������� USB BIOS Flashback 安裝精靈。請依照螢幕指示的步驟來完成程式的安裝。 2. 將 USB 儲存裝置插入 USB BIOS Flashback 連接埠。 建議您使用 USB 2.0 儲存裝置來儲存最新的 BIOS,可以獲得更好的相容 性與穩定性。 3. 啟動 ���������������������������������������� USB BIOS Flashback 安裝精靈來自動下載最新的 BIOS。 4. 按下 USB BIOS Flashback 按鈕約三秒鐘直到指示燈開始閃爍,表示 USB BIOS Flashback 功能已經啟動。 5.
若要在 BIOS 設定中使用更多的 BIOS 更新程式,請參考第三章 3.11 更 新 BIOS 一節的說明。 USB BIOS Flashback 連接埠 • 在更新 BIOS 過程中,請勿將外接式儲存裝置、電源拔除,也請勿使 用 CLRTC 跳線帽,否則更新過程將會被中斷。若是發生更新中斷的 狀況,請依照上述步驟重新進行更新直至更新完成為止。 第二章 • 若燈號閃爍超過五秒鐘,並轉變為持續亮著,表示 U S B B I O S Flashback 動作沒有正確被執行,可能造成的原因有二,分別為:1. 外接式儲存裝置安裝不正確;2.
2.3 主機板後側與音效連接埠 第二章 2.3.1 後側面板連接埠 後側面板連接埠 1. USB 2.0 連接埠 7-10 5. HDMI 連接埠 2. 光纖 S/PDIF 輸出連接埠 6. USB 3.0 連接埠 5-6 7. USB 3.0 連接埠 3-4,支援 ASUS USB 3.0 Boost Turbo 模式(底端 連接埠支援 USB BIOS Flashback 與 USB Charger+ 功能) 8. Audio I/O 連接埠** 3. LAN (RJ-45) 網路連接埠* 4.
• USB 3.0 裝置只能用來作為資料磁碟。 • 強烈建議您將 USB 3.0 裝置連接至 USB 3.0 連接埠,才能讓您的 USB 3.0 裝置獲得更快更好的效能表現。 ® • 由於 Intel 8 系列晶片組的設計,所有連接至 USB 2.0 與 USB 3.
2.3.2 音效輸出/輸������� 入������ 連接圖示說明 音效輸出/輸入連接埠 橘色 淺藍色 黑色 草綠色 灰色 粉紅色 第二章 連接耳機與麥克風 連接立體聲喇叭 連接 2.
連接��������� 4.1 聲道喇叭 ���� 第二章 連接 5.
第二章 連接 7.
2.4 第一次啟動電腦 1. 確認所有排線與接腳都接妥,然後蓋上機殼的外蓋。 2. 確定所有的開關都已關閉 3. 將電源線接上機殼背面的電輸入插座。 4. 情況許可的話,最好將電源線路上加接突波吸收/保護器。 5. 您可以先開啟以下周邊的電源: a. 顯示器 b. 外接式 SCSI 接頭周邊裝置(從串連的最後端開始) c. 系統電源(ATX 的電源不會因為送電而馬上動作,而是等待面板上的按鈕 動作後才會工作) 第二章 6.
第三章 3.
3.
3.2.1 EZ Mode 本主機板的 BIOS 設定程式的預設值為 EZ Mode。您可以在 EZ Mode 中檢視系統 基本資料,並可以選擇顯示語言、喜好設定及開機裝置順序。若要進入 A d v a n c e d Mode,請點選 Exit/Advanced Mode 然後選擇 Advanced Mode,或是按下 F7 快速鍵。 進入 BIOS 設定程式的畫面可個人化設定,請參考 3.8 啟動選單(Boot menu)中關於 Setup Mode 項目的說明。 選擇欲使用的語言 不儲存變更並離開 BIOS、儲存變更並重 新啟動系統,或是進入 Advanced Mode 第三章 本項目顯示 CPU/主機板溫度、 CPU/5V/3.
3.2.
選單項目 於功能表列選定選項時,被選擇的功能將會反白,即選擇 M a i n 選單所出現的項 目。 點選選單中的其他項目(例如:Ai Tweaker、Advanced、Monitor、Boot 與 Exit) 也會出現該項目不同的選項。 返回 在子選單時即會出現此按鈕。請按下 鍵或使用滑鼠按下此按鍵回到前一選單 畫面。 子選單 在選單畫面中,若功能選項前面有一個小三角形標記,代表此為子選單,您可利用 方向鍵來選擇,並按下 鍵來進入子選單。 設定視窗 在選單中選擇功能項目,然後按下 鍵,程式將會顯示包含此功能所提供的 選項小視窗,您可以利用此視窗來設定您所想要的設定。 捲軸 在選單畫面的右方若出現如右圖的捲軸畫面,即代表此頁選項超過可顯示的畫面, 您可利用上/下方向鍵或是 PageUp/PageDown 鍵來切換畫面。 操作功能鍵 在選單畫面的右下角將顯示 BIOS 設定程式的操作功能鍵,請使用操作功能鍵選擇 項目進行設定。 第三章 如果您������ 在����� F3: ������������������������� 捷徑列表中刪除所有的捷徑項目
3.3 我的最愛(My Favorites) 您可以將 BIOS 項目儲存至我的最愛並隨時檢視。 新增項目至我的最愛 請依照以下步驟新增項目至我的最愛: 第三章 1. 請使用箭頭符號選擇想要新增的項目,使用滑鼠時,請將游標移至該項目上。 2.
3.4 主選單(Main Menu) 主選單只有在您進入 Advanced Mode 時才會出現。您可以由主選單檢視系統基本 資料,並設定系統日期、時間、語言和安全性。 安全性選單(Security) 第三章 本選單可讓您改變系統安全設定。 • 若您忘記設定的 BIOS 密碼,可以採用清除 CMOS 即時鐘(RTC)記 憶體。請參考 1.2.
系統管理員密碼(Administrator Password) 當您設定系統管理員密碼後,建議您先登入您的帳戶,以免 BIOS 設定程式中的某 些資訊無法檢視或變更設定。 設定系統管理員密碼 請依照以下步驟設定系統管理員密碼(Administrator Password): 1. 請選擇 Administrator Password 項目並按下 。 2. 由 Create New Password 視窗輸入欲設定的密碼,輸入完成按下 。 3. 請再一次輸入密碼以確認密碼正確。 變更系統管理員密碼 請依照以下步驟變更系統管理員密碼(Administrator Password): 1. 請選擇 Administrator Password 項目並按下 。 2. 由 Enter Current Password 視窗輸入密碼並按下 。 3. 由 Create New Password 視窗輸入新密碼,輸入完成按下 。 4.
3.5 Ai Tweaker 選單(Ai Tweaker menu) 本選單可讓您設定超頻功能的相關選項。 注意!在您設定本進階選單的設定時,不正確的設定值將導致系統功能 異常。 以下項目的預設值會隨著您所安裝的處理器與記憶體而不同。 第三章 將捲軸往下捲動來顯示以下項目。 Ai Overclock Tuner [Auto] 本項目可以讓您設定 CPU 的超頻選項來達到您所想要的 CPU 外頻。請選擇以下任 一種預設的超頻選項: [Auto] 自動載入系統最佳化設定值。 [Manual] 可讓您獨立設定超頻參數。 [X.M.P.] 若您所安裝的記體模組支援 eXtreme Memory Profile(X. M. P.
Filter PLL [Auto] 本項目用當執行高或低 B C L K 時選擇 B C L K(基本時脈)模式。設定值有: [Auto] [Low BCLK Mode] [High BCLK Mode]� 。 BCLK/PEG Frequency [100.0] 本項目用來設定���������� BCLK/PEG ���������� 頻率以增強系統效能。您可以使用 <+> 與 <-> 鍵調 整數值,數值變更的範圍為 80.0MHz 至� �� ��������� 300.0MHz� 。 以下項目只有在 Ai Overclock Tuner 設定為 [X.M.P.] 時才會出現。 Extreme Memory Profile 本項目用來選擇記憶體所支援的 X.M.P.
3-Core Ratio Limit [Auto] 選擇 [Auto] 並套用 CPU 預設的 Turbo 倍頻設定或選擇手動指定 3-Core Ration Limit 數值高於或等於 4-Core Ratio Limit。 4-Core Ratio Limit [Auto] 選擇 [Auto] 並套用 CPU 預設的 Turbo 倍頻設定或選擇手動指定 4-Core Ration Limit 數值高於或等於 3-Core Ratio Limit。 若您要設定 4-Core ���������������������������������������������������� Ratio Limit 數值,請勿將 ��������������������������������� 1-Core Ratio Limit、2-Core Ratio Limit 與 3-Core Ratio Limit 設定為 [Auto]。 Min CPU Cache Ratio [Auto] 本項目用來設定處理器的非核心比值至可能的最小值。使用 <+> 與 <-> 按鍵來調整 數值。變更的範圍會依��������� 安裝的
DRAM Timing Control 本選單中的項目可讓您設定 DRAM timing 控制功能,您可以使用 <+> 與 <-> 鍵調 整數值。當您要回復預設值時,請使用鍵盤輸入 並按下 鍵。 自行更改數值將會導致系統的不穩定與硬體損毀,當系統出現不穩定的 狀況時,建議您使用預設值。 Primary Timings DRAM CAS# Latency [Auto] 設定值有:[Auto] [1] – [31]。 DRAM RAS# to CAS# Delay [Auto] 設定值有:[Auto] [1] – [31]。 DRAM RAS# PRE Time [Auto] 設定值有:[Auto] [1] – [31]。 DRAM RAS# ACT Time [Auto] 設定值有:[Auto] [1] – [63]。 DRAM COMMAND Mode [Auto] 設定值有:[Auto] [1] – [3]。 Secondary Timings DRAM RAS# to RAS# Delay [Auto] 設定值有:[Auto] [1] – [15]。 第三章
DRAM CAS# Write Latency [Auto] 設定值有:[Auto] [1] – [31]。 RTL IOL control DRAM RTL initial Value [Auto] 設定值有:[Auto] [1] - [63]。 DRAM RTL (CHA_R0D0) [Auto] 設定值有:[Auto] [1] - [63]。 DRAM RTL (CHA_R0D1) [Auto] 設定值有:[Auto] [1] - [63]。 DRAM RTL (CHA_R1D0) [Auto] 設定值有:[Auto] [1] - [63]。 DRAM RTL (CHA_R1D1) [Auto] 設定值有:[Auto] [1] - [63]。 DRAM RTL (CHB_R0D0) [Auto] 設定值有:[Auto] [1] - [63]。 DRAM RTL (CHB_R0D1) [Auto] 設定值有:[Auto] [1] - [63]。 DRAM RTL (CHB_R1D0) [Auto] 設定值有:[Auto] [1] - [63]。 DRAM RTL (CHB_R1D1) [Auto] 設定
Third Timings tRDRD [Auto] 設定值有:[Auto] [1] – [7]。 tRDRD_dr [Auto] 設定值有:[Auto] [1] – [15]。 tRDRD_dd [Auto] 設定值有:[Auto] [1] – [15]。 tWRRD [Auto] 設定值有:[Auto] [1] – [63]。 tWRRD_dr [Auto] 設定值有:[Auto] [1] – [15]。 tWRRD_dd [Auto] 設定值有:[Auto] [1] – [15]。 tWRWR [Auto] 設定值有:[Auto] [1] – [7]。 tWRWR_dr [Auto] 設定值有:[Auto] [1] – [15]。 tWRWR_dd [Auto] 設定值有:[Auto] [1] – [15]。 Dec_WRD 設定值有:[Auto] [0] – [1]。 第三章 tRDWR [Auto] 設定值有:[Auto] [1] – [31]。 tRDWR_dr [Auto] 設定值有:[Auto] [1] – [31]。 tRDWR_dd [Auto] 設定值有:[Au
MISC MRC Fast Boot [Auto] 本項目用來啟動或關閉 M R C f a s t b o o t 功能。設定值有:[A u t o] [E n a b l e] [Disable]。 DRAM CLK Period [Auto] 設定值有:[Auto] [1] – [14]。 Channel A DIMM Control [Enable Bot...] 設定值有:[Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1] [Disable Both DIMMS]。 Channel B DIMM Control [Enable Bot...] 設定值有:[Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1] [Disable Both DIMMS]。 Scrambler Setting [Optimized ...
以下項目只有在 CPU Voltage Frequency 設定為 [Auto] 時才會出現。 VRM Spread Spectrum [Disabled] 本項目可讓您啟動 VRM Spread Spectrum 項目以增加系統穩定性。設定值 有:[Enable] [Disable]。 Active Frequency Mode [Disabled] 本項目������������������������������������������������ 設為 [Enabled] 時,��������������������������������� 可讓您啟動 Active Frequency Mode 項目以增強 省電效能��������������������������������� ,讓您在開關頻率時,提高省電狀態。雖然較高的頻率可以讓 VRM 瞬間響應更快速,開關頻率則會影響 VRM 的溫度元件 。設定值有:[Enable] ��������������� [Disable]。 CPU Power Phase Control [Auto] 本項目用來依照 C P U 的需求控制電源相數。設定值有
CPU Power Thermal Control [130] 較高的溫度帶給 CPU 電力更大的散熱範圍,並擴展超頻容忍度來增加超頻的 潛力。使用 <+> 與 <-> 按�������������������� ��������������������� 鍵調整數值,�������������� 數值會依照安裝的處理器而異� 。 請勿將散熱系統移除,散熱環境需受到監控。 DRAM Current Capability [100%] 較高的數值提供更大的總電力範圍,同時擴展超頻頻率的範圍。設定值有: [100%] [110%] [120%] [130%]。 DRAM Voltage Frequency [Auto] 本項目用來調整記憶體切換頻率。指派固定的高記憶體頻率來增加超頻的範 圍,或低記憶體頻率以獲得較佳的系統穩定度。設定值有:[Auto] [Manual]。 以下��������������������������������� 項目只有在 DRAM Voltage Frequency 設定為 [Manual] 時才會出現。 DRAM Fixed Frequency Mode [300] 本項目用
Turbo Mode 參數 Long Duration Package Power Limit [Auto] 本項�������������������������������������������� 目������������������������������������������� 用來限制 Turbo 比值的持續時間,以高於�������������������� ������������������������������� TDP���������������� (Thermal Design Power)為最高效能��������������������������������� 。請使用 <+> 與 <-> 鍵調整數值。������������ 數值變更的範圍為 1W 至 4096W。 Package Power Time Window [Auto] 本項目用來維持 turbo 比值的封裝電力時間視窗。請使用 <+> 與 <-> 鍵調 整數值。����������� 數值變更的範圍為每秒 1 �������� 至 127。 Short Duration Package Power Limi
Power Decay Mode [Auto] 本項目可使系統在處理器為低電流時提升 Fully Integrated Voltage Regulator 的省電效能。設定值有:[Auto] [Disabled] [Enabled]。 Idle Power-in Response [Auto] 本項目用來設定 Fully Integrated Voltage Regulator 進入手動覆載模式時的 轉向比率。設定值有:[Auto] [Regular] [Fast]。 Idle Power-out Response [Auto] 本項目用來設定 Fully Integrated Voltage Regulator 離開手動覆載模式時的 轉向比率。設定值有:[Auto] [Regular] [Fast]。 Power Current Slope [Auto] 本項目用來設定在負載暫態時高速相數電流平衡,以避免因負載電流擺動 造成電流不平衡。設定值有:[Auto] [LEVEL -4] - [LEVEL 4]。 Power Current Offset [Auto] 本項目可增加或減少處理器檢測的輸出電流。在使用
Extreme OV [Disabled] 關閉本項目可以用來保護處理器不因過高的電壓而燒毀。當啟動本項目時,您 可以選擇較高層級的電壓來進行超頻,但無法保證處理器的使用壽命。設定值有: [Enabled] [Disabled]。 CPU Core Voltage [Auto] 本項目用來設定處理器核心的電壓源總量。當核心頻率增加時請增加電壓總量。設 定值有:[Auto] [Manual Mode] [Offset Mode]。 以下項目只有在 CPU Core Voltage 設定為 [Manual] 時才會出現。 CPU Core Voltage Override [Auto] 本項目用來設定 CPU Core Voltage override。請使用 <+> 與 <-> 鍵調整數值, 設定值以 0.001V 為間隔,變更的範圍從 0.001V 至 1.
CPU Cache Voltage Offset 本項目用來設定 CPU Cache Voltage Offset��������������� 。預設值為依照安裝的處理器所得 的標準數值。��������������������������������������� 請使用 <+> 與 <-> 鍵調整數值,設定值以 0.001V 為間隔,變更的 範圍從 0.001V 至 0.999V。 CPU Graphics Voltage [Auto] 本項目用來設定處理器繪圖元件的電壓源總量。當 iGPU 頻率增加時請增加電壓總 量。設定值有:[Auto] [Manual Mode] [Offset Mode] [Adaptive Mode]。 以下項目只有在 CPU Graphics Voltage 設定為 [Manual] 時才會出現。 CPU Graphics Voltage Override [Auto] 本項目用來設定 CPU Graphics Voltage override。請使用 <+> 與 <-> 鍵調整數 值,設定值以 0.001V 為間隔,變更的範圍從 0.001V 至 1.
CPU System Agent Voltage Offset [Auto] 本項目用來設定處理器系統代理的電壓源總量,包括 PCIe 控制器和電源控制 元件。當 DRAM 頻率增加時請增加電壓總量。請使用 <+> 與 <-> 鍵調整數值,設 定值以 0.001V 為間隔,變更的範圍從 0.001V 至 0.999V。 CPU Analog I/O Voltage Offset Mode Sign [+] [+] 增加數值。 [–] 減少數值。 CPU Analog I/O Voltage Offset [Auto] 本項目用來設定處理器 I/O 類比部分的電壓源總量。當 DRAM 頻率增加時請增 加電壓總量。請使用 <+> 與 <-> 鍵調整數值,設定值以 0.001V 為間隔,變更的 範圍從 0.001V 至 0.
DRAM Voltage [Auto] 本項目可讓您設定 DRAM 電壓。請使用 <+> 與 <-> 鍵調整數值,設定值以 0.005V 為間隔,變更的範圍從 1.20V 至 1.92V。 根據 Intel 處理器規格,記憶體電壓若是超過 1.65V 可能會對 CPU 造成 永久損壞,建議您安裝電壓低於 1.65V 的記憶體以保護 CPU。 PCH VLX Voltage [Auto] 本項目用來設定 P C H 的 I/O 電壓。請使用 <+> 與 <-> 鍵調整數值,設定值以 0.0125V 為間隔,變更的範圍從 1.2000V 至 2.0000V。 PCH Voltage [Auto] 本項目用來設定 PCH(Platform Controller Hub)核心電壓。請使用 <+> 與 <-> 鍵 調整數值,設定值以 0.0125V 為間隔,變更的範圍從 0.7V 至記憶體電壓最大值,並 限制在最大 1.
Clock Crossing Reset Voltage [Auto] 本項目可讓您設定當 BCLK DN 上緣等於 BCLK DP 下緣時,時脈交叉電壓的重置 值。設定值以 0.00625V 為間隔,變更的範圍從 0.1V 至 1.9V。 Clock Crossing Voltage [Auto] 本項目可讓您設定當 BCLK DN 上緣等於 BCLK DP 下緣時,時脈交叉的電壓值。設 定值以 0.00625V 為間隔,變更的範圍從 0.1V 至 1.
3.
3.6.
Intel Virtualization Technology [Disabled] [Enabled] 啟動 Intel 虛擬技術(Virtualization Technology)讓硬體平台可以同 時執行多個作業系統,將一個系統平台虛擬為多個系統。 [Disabled] 關閉此功能。 Hardware Prefetcher [Enabled] [Enabled] 本項目可以讓硬體平台獨立和同步運作多重作業系統。 [Disabled] 關閉此功能。 Adjacent Cache Line Prefetch [Enabled] [Enabled] 本項目可以讓硬體平台執行 Adjacent Cache Line Prefetch 功能。 [Disabled] 關閉此功能。 Boot Performance Mode [Max on-Tu...
CPU C6 Report [Enabled] 本項目可以讓您啟動或關閉 CPU C6 報告給作業系統。 設定值有:[Enabled] [Disabled]。 C6 Latency [Short] 本項目可以讓您設定 C6 state 的 C6 延遲期間。 設定值有:[Short] [Long]。 CPU C7 Report [CPU C7s] 本項目可以讓您啟動或關閉 CPU C7 報告給作業系統。 設定值有:[Disabled] [CPU C7] [CPU C7s]。 C7 Latency [Long] 本項目可以讓您設定 C7 state 的 C7 延遲期間。 設定值有:[Short] [Long]。 Package C State Support [Auto] 本項目用來啟動或關閉 CPU C State 支援功能。設定值有:[Auto] [Enabled] [C0/C1] [C2] [C3] [C6] [CPU C7] [CPU C7s]。 3.6.
Intel Rapid Start Technology [Disbled] 本項目用來啟動或關閉 Intel Rapid Start Technology 功能。設定值有:[Enabled] [Disabled]。 以下項目只有在 Intel Rapid Start Technology 設定為 [Enabled] 時才會出 現。 Entry on S3 RTC Wake [Enabled] 本項目������������������������������������ 為����������������������������������� 用來啟動系統的即時鐘(R T C)喚醒功能。設定值有:[D i s a b l e] [Enabled]。 Entry After [0] 本項目用來設定 S3 進入(S3 ����������������������������� entry)的���������������� 即時鐘(RTC)喚醒功能。設定� 範 圍為從 0 分鐘(立即)至 120 分鐘� 。 Active Page Threshold Support [Enabled] ® 本功能支援在小
3.6.
S.M.A.R.T. Status Check [Enabled] S.M.A.R.T.(自動偵測、分析、報告技術,Self-Monitoring, Analysis and Reporting Technology)是一個監控軟體,可以監控您的硬碟,並在發生錯誤時於開機自我檢測 (POST)時顯示錯誤訊息。設定值有:[Enabled] [Disabled]。 Hot Plug [Disabled] (SATA6G_1 - SATA6G_6 [Brown]) 這些項目只有在 SATA mode 設定為 [AHCI] 或 [RAID] 時才會出現,用來啟動或關 閉支援 SATA 熱抽換功能。設定值有:[Disabled] [Enabled]。 3.6.4 系統代理設定(System Agent Configuration) VT-d [Disabled] 關閉此功能。 [Disabled] 開啟此功能。 CPU Audio Devices [Enabled] 本項目用來啟動或關閉 CPU SA Audio 裝置。devices.
Render Standby [Auto] ® 本項目用來啟動 Intel Graphics Render Standby 功能來支援系統閒置時 降低 iGPU 電力的消耗。設定值有:Configuration options: [Auto] [Disabled] [Enabled]。 iGPU Multi-Monitor [Disabled] 本項目��������������������������������� 為�������������������������������� 用來啟動 iGPU Muiti-Monitor 功能。iGPU 共享系統記憶體固定為 ����������� 64MB。設定值有:[Disabled] [Enabled]。 DMI Configuration 本項目用來設定 DMI(Desktop Management Interface)功能。 DMI Gen 2 [Auto] 本項目用來啟動或關閉 DMI Gen 2。設定值有:[Auto] [Enabled] [Disabled]。 NB PCIe Configuration 本項目用來設定 NB PCI Expr
3.6.
3.6.
3.6.
Intel LAN Controller [Enabled] ® [Enabled] 啟動 Intel LAN 網路控制器。 [Disabled] 關閉此控制器。 Intel PXE OPROM [Disabled] 本項目只有在將 Intel LAN Controller 項目設定為 [Enabled] 時才會出現。本項 目可以讓您開啟或關閉 Intel 網路控制器的 PXE OptionRom。設定值有:[Enabled] [Disabled]。 第三章 BIOS 程式設定 ���� 3-36 第三章:���������
3.6.
3.6.
3.7 監控選單(Monitor menu) 監控選單可讓您檢視系統溫度/電力狀況,並且對風扇做進階設定。 CPU Temperature/MB Temperature [xxx������� ℃������ /xxx�� ℉�] CPU Fan Speed [xxxx RPM] or [Ignore] / [N/A], CPU OPT Speed [xxxx RPM] or [Ignore] / [N/A], Chassis Fan 1/4 Speed [xxxx RPM] or [Ignore] / [N/A], Assistant Fan Speed [xxxx RPM] or [Ignore] / [N/A] 為了避免系統因為過熱而造成損壞,本系列主機板備有風扇轉速 RPM(Rotations P e r M i n u t e)監控,所有的風扇都設定了轉速安全範圍,一旦風扇轉速低於安全範 圍,華碩智慧型主機板就會發出警訊,通知使用者注意。如果風扇並未連接至主機 板,本項目會顯示 N/A。若是您不想偵測這個項目,請選擇 [Ignore]。 CPU core 0-3 Voltage, 3.
CPU Q-Fan Control [Auto] 本項目用來設定 CPU Q-Fan 運作模式。 [Advance Mode] 偵測安裝的處理器風扇類型並自動切換控制模式。當安裝 3-pin 的處理器風扇時,請選擇本項目來使用 Q-Fan 控制的 DC 模式。 [Auto] 在 PWM 模式啟動 CPU Q-Fan 控制來使用 4-pin 處理器風扇。 [Disabled] 關閉 CPU Q-Fan 控制功能。 以下的項目只有����������������������� 在���������������������� CPU Q-Fan Control 設為 [Advance Mode] 與 �� [Auto] 時 才會出現。 CPU Fan Speed Low Limit [600 RPM] 本項目可以讓您設定 CPU Q-Fan Control 的功能處及理器風扇速度。設定值 有:[Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]。 CPU Fan Profile [Standard] 本項目用來設定處理器風扇適當
Chassis Fan Speed Low Limit 1/4 [600 RPM] 本項目只有在 Chassis Q-Fan Control 設定為 [Enabled] 時才會出現。本項目可以讓 您設定 CPU Q-Fan Control 的功能及機殼風扇速度。設定值有:[Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]。 Chassis Fan 1/4 Profile [Standard] 本項目只有在 Chassis Q-Fan Control 設定為 [Enabled] 時才會出現,用來設定 機殼風扇適當的效能。 [Standard] 設定為 [Standard] 讓機殼風扇依據處理器的溫度自動調整。 [Silent] 設定為 [Silent] 將風扇速度調整到最低,並擁有最安靜的執行環 境。 [Turbo] 設定為 [Turbo] 來獲得機殼風扇的最大轉速。 [Manual] 設定為 [Manual] 來指派詳細的風扇轉速控制參數。 以下的項目只有當您將 Chassis Fan Profile 設為 [Manu
ASST Fan Profile [Standard] 本項目僅當 Assistant Q-Fan Control 項目設為啟用時才會顯示。提供您設定輔助 風扇(assistant fan)適合的效能。 [Standard] 設定為 [Standard] 讓 assistant fan(輔助風扇)依據機殼風扇的 溫度自動調整。 [Silent] 設定為 [Silent] 將 assistant fan(輔助風扇)速度調整到最低, 並擁有最安靜的執行環境。 [Turbo] 設定為 [Turbo] 來獲得 assistant fan(輔助風扇)的最大轉速。 [Fan Off] 設定為關閉所有 assistant fan(輔助風扇)。 [Manual] 設定為 [Manual] 來指派詳細的 assistant fan(輔助風扇)轉速控 制參數。 以下的項目僅當������������������������������������������ Assistant Fan Profile 設定為���������������� ������������������� [Manual] 時才
3.8 啟動選單(Boot menu) 本選單可讓您改變系統啟動裝置與相關功能。 Boot Configuration [Disabled] 使系統使用正常啟動速度。 [Enabled] 加速系統啟動速度。 以下的項目只有當您將 Fast Boot 設為 [Enabled] 時才會出現。 USB Support [Partial In...
HW Fast Boot [Disabled] 本項目用來啟動或關閉 HW Fast Boot。 設定值有:[Disabled] [Enabled]。 DirectKey Enable [Go to BIOS...
Option ROM Messages [Force BIOS] [Force BIOS] 選購裝置韌體程式訊息會強制在開機顯示。 [Keep Current] 選購裝置韌體程式訊息只有在該程式供應商設定為顯示時,才會在開 機時顯示。 Interrupt 19 Capture [Disabled] 本項目用來使用隨選記憶體(R O M)限制中斷 19。設定值有:����������� [D i s a b l e d] [Enabled]� 。 Setup Mode [EZ Mode] [Advanced Mode] 將 Advanced Mode 設定為 BIOS 設定程式的預設值。 [EZ Mode] 將 EZ Mode 設定為 BIOS 設定程式的預設值。 CSM (Compatibility Support Module) 本項目用來設定 CSM 項目以增加對 VGA、啟動裝置和及其他裝置的兼容性。 Launch CSM [Enabled] [Auto] 系統將自動偵測啟動裝置和及其他裝置。 [Enabled] 啟動 CSM 以支援 non-UEFI 裝置或 Wi
Secure Boot ® 本項目用來設定並管理 Windows Secure Boot,以提升系統在 POST 時的安全性。 OS Type [Windows UEFI mode] ® [Windows UEFI Mode] 可以讓您選擇要執行 Microsoft Secure Boot 的 ® 作業系統。當啟動 Windows UEFI 模式或其他 ® Microsoft Secure Boot 兼容作業系統時請選擇此 項目。 ® [Other OS] 當執行 Windows non-UEFI 模式,或是不兼容於 ® Microsoft Secure Boot 的作業系統時執行最佳化 ® ® 功能。Microsoft Secure Boot 僅支援 Windows UEFI 模式。 以下的項目僅當 OS Type 設定為 [Windows UEFI mode] 時才會顯示。 Key Management 本項目只有當 Secure Boot 設為 [Windows UEFI Mode] 時才會出現。可以讓您 管理 Secure Boot 的金鑰。 Install Default Secur
KEK Management KEK(Key-exchange Key 或 Key Enrollment Key)用來管理 db(Signature database)和 dbx(Revoked Signature database)。 ® Key-exchange Key(KEK)為 Microsoft Secure Boot Key-Enrollment Key (KEK)。 Delete the KEK 本項目用來刪除系統中的 KEK。設定值有:[Yes] [No]。 Load KEK from File 本項目用來設定由 USB 儲存裝置下載 KEK。 Append KEK from File 本項目用來設定由儲存裝置下載其他 KEK 以管理 db 和 dbx。 KEK 檔案須為 UEFI 變數格式。 DB Management db(Authorized Signature database)包含授權認證和數位簽章等,可載入後執 行。 Delete the db 本項目用來刪除系統中的 db 檔案。設定值有:[Yes] [No]。 Append db from File 本項目用來設定由儲存裝
Append dbx from File 本項目用來設定由儲存裝置下載其他 dbx 檔案�������������� ,藉以讓更多的 db 檔案無 法下載� 。 dbx 檔案須為 UEFI 變數格式。 Boot Option Priorities 本項目讓您自行選擇開機磁碟並排列開機裝置順序。依照 1st、2nd、3rd 順序分別 代表其開機裝置順序,而裝置的名稱將因使用的硬體裝置不同而有所差異。 • 請選擇下列任一方式進入 Windows 安全模式: - 當 ASUS Logo 出現時按下 鍵。 - 在開機自我檢測(POST)時按下 鍵。 • 開機時您可以在 ASUS Logo 出現時按下 選擇啟動裝置。 Boot Override 本項目將顯示可使用的裝置,裝置的名稱將因使用的硬體裝置不同而有所差異。點 選任一裝置可將該將置設定為開機裝置。 第三章 BIOS 程式設定 ���� 3-48 第三章:���������
3.9 工具選單(Tools menu) 本工具選單可以讓您針對特別功能進行設定。請選擇選單中的選項並按下 鍵來顯示子選單。 3.9.1 ASUS EZ Flash 2 本項目可以讓您啟動華碩 EZ Flash 2 程式,按下 會出現再次確認的視窗, 請使用左右鍵選擇 [Yes] 或 [No],接著按下 確認。 請參考 3.11.2 華碩 EZ Flash 2 的說明。 3.9.2 ASUS O.C.
Save to Profile 本項目可以讓您儲存目前的 BIOS 檔案至 BIOS Flash 中,請輸入您的檔案名稱,然 後按下 鍵,接著選擇 Yes。 Load from Profile 本項目可以讓您載入先前儲存在 BIOS Flash 中的 BIOS 設定。請按下 鍵並 選擇 Yes 來載入檔案。 • 當進行 BIOS 升級時,請勿關閉或重新啟動系統以免造成系統開機失 敗。 • 建議您只在相同的記憶體/處理器設定與相同的 BIOS 版本狀態下,更 新 BIOS 程式。 3.9.
3.10 離開 BIOS 程式(Exit menu) 本選單可讓您讀取 BIOS 程式出廠預設值與離開 BIOS 程式。你也可以由 Exit 選單 進入 EZ Mode。 Load Optimized Defaults 本項目可讓您載入 BIOS 程式設定選單中每個參數的預設值。當您選擇本項目或按 下 ,便會出現一個確認對話視窗,選擇 Yes 以載入預設值。 Save Changes & Reset 當您完成對 BIOS 設定程式所做的變更後,請選擇本項目或按下 ,將會出現 一個確認對話視窗,請選擇 Yes 以儲存設定並離開 BIOS 設定程式。 本項目可讓您放棄所做的變更,並回復原先儲存的設定。在選擇本項目或按下 鍵後,將會出現一個確認對話視窗,請選擇 Yes 以放棄任何設定並載入原先儲 存的設定,同時離開 BIOS 設定程式。 ASUS EZ Mode 選擇本項目可進入 EZ Mode 選單。 Launch UEFI Shell from filesystem device 本項目可以讓您由含有資料系統的裝置中啟動 UEFI Shell(shellx64.
3.11 更新 BIOS 程式 華碩網站上提供有最新的 B I O S 程式,可以強化系統的穩定度、相容性或執行效 能,但是執行 BIOS 程式更新是具有潛在性風險的,若是使用現有版本的 BIOS 程式 都沒有發生問題時,請勿手動執行更新 BIOS 程式。不適當的 BIOS 程式更新可能會 導致系統開機失敗。若有需要,請使用以下各節的方法來更新您的 BIOS 程式。 請造訪華碩網站(http://tw.asus.com)來下載本主機板最新的 BIOS 程 式。 1. EZ Update:在 Windows 作業系統中更新 BIOS 程式。 2. ASUS EZ Flash 2:使用 USB 隨身碟來更新 BIOS。 3. ASUS CrashFree BIOS 3:當 BIOS 檔案遺失或損毀時,可以使用 USB 隨身碟或 主機板的驅動程式與公用程式光碟來更新 BIOS。 4. ASUS BIOS Updater:在 DOS 環境下,使用主機板驅動程式與公用程式光碟與 USB 隨身碟來更新並備份 BIOS。 上述軟體請參考相關章節的詳細使用說明。 3.11.
3.11.2 華碩 EZ Flash 2 華碩 EZ Flash 2 程式讓您能輕鬆的更新 BIOS 程式,可以不必再透過開機片的冗長 程序或是到 DOS 模式下執行。 請至華碩網站 http://tw.asus.com 下載最新的 BIOS 程式檔案。 請依照以下步驟透過 EZ Flash 2 更新 BIOS 程式: 1. 將儲存有最新的 BIOS 檔案的 USB 隨身碟插入 USB 連接埠。 第三章 2. 進入 BIOS 設定程式的 Advanced Mode,選擇 Tool > ASUS EZ Flash Utility,接 著請按下 鍵。 3. 請使用 鍵操控 Drive 區域。 4. 請利用上/下方向鍵找到存放有最新 B I O S 檔案的 U S B 隨身碟,接著請按下 鍵。 5. 請使用 鍵操控 Folder Info 區域。 6.
• 本功能僅支援採用 FAT 32/16 格式的單一磁區 USB 隨身碟。 • 當更新 BIOS 時,請勿關閉或重置系統以避免系統開機失敗。 請讀取出廠預設值來保持系統的穩定。請參閱 3.9 離開 BIOS 程式 一節 中 Load Optimized Defaults 項目的詳細說明。 3.11.3 華碩 CrashFree BIOS 3 華碩最新自行研發的 CrashFree BIOS 3 工具程式,讓您在當 BIOS 程式和資料被病 毒入侵或毀損時,可以輕鬆的從驅動程式及公用程式光碟,或是從含有最新或原始的 BIOS 檔案的 USB 隨身碟中回復 BIOS 程式的資料。 在驅動程式及公用程式光碟中的 BIO S 程式版本可能會比官方網站上的 BIOS 程式版本舊,若是想要使用更新的 BIOS 程式,請至 http://support. asus.com 網站下載,並儲存在可攜式儲存裝置中。 回復 BIOS 程式 請依照下列步驟使用公用程式光碟回復 BIOS 程式: 1. 啟動系統。 2.
3.11.4 華碩 BIOS Updater 華碩 BIOS Updater 讓您可以在 DOS 環境下更新 BIOS 程式,還可以用來複製現有 的 BIOS 檔案,當您的 BIOS 程式在更新過程中失敗或中斷時,可以作為備份使用。 以下的程式畫面僅供參考,您實際操作的畫面可能會與手冊所示的畫面 不盡相同。 更新 BIOS 之前 1. 準備本主機板的驅動程式與公用程式光碟,以及 F A T32/16 格式且單一磁區的 USB 隨身碟。 2. 造訪華碩網站 http://support.asus.com 下載最新的 BIOS 程式與 BIOS Updater,然 後儲存在 USB 隨身碟。 • DOS 環境下不支援 NTFS 格式,請勿將 BIOS 檔案與 BIOS Updater 儲存在 NTFS 格式的 USB 隨身碟。 • 請勿將 BIOS 程式儲存在磁碟片,以免磁碟片的容量不夠使用。 3. 將電腦關機,並移除連接所有的 SATA 硬體裝置(選購)。 DOS 環境下啟動系統 1. 將存有最新 BIOS 檔案與 BIOS Updater 的 USB 隨身碟插入 USB 連接埠。 2.
更新 BIOS 檔案 請依照以下步驟更新 BIOS 檔案: 1. 當 FreeDOS 出現時,輸入指令 bupdater /pc /g,然後按下 。 D:\>bupdater /pc /g 2. 接著會出現如下圖所示的 BIOS Updater 畫面。 ASUSTek BIOS Updater for DOS V1.30 [2013/02/22] FLASH TYPE: MX1C 25L1065A Current ROM Update ROM BOARD: GRYPHON Z87 UNKNOWN BOARD: VER: 0204 UNKNOWN VER: DATE: 01/01/2012 UNKNOWN DATE: PATH: A:\ A: Z87D.CAP 2097152 2013-02-22 17:30:48 Note [Enter] Select or Load [Up/Down/Home/End] Move [Tab] Switch [B] Backup [V] Drive Info [Esc] Exit 3.
4. 選擇 Yes 然後按下 ,當 BIOS 更新完成時,按下 退出 BIOS Updater 並重新啟動電腦。 請勿在 BIOS 進行更新時,執行關機或重新啟動電腦,以防止 BIOS 更新 失敗。 • BIOS Updater 1.
第三章 BIOS 程式設定 ���� 3-58 第三章:���������
第四章 4.1 安裝作業系統 ® ® • 本主機板支援 Microsoft 32-bit/64-bit Windows 7 與 32-bit/64-bit ® Windows 8 作業系統(OS,Operating System)。 • 由於主機板和周邊硬體裝置的選項設定繁多,本章僅就軟體的安裝程 序供您參考。您也可以參閱您使用的作業系統說明文件以取得更詳盡 的資訊。 4.2 驅動及公用程式 DVD 光碟資訊 隨貨附贈的驅動及公用程式 DVD 光碟包括了數個有用的軟體和公用程式,將它們 安裝到系統中可以強化主機板的機能。 華碩驅動程式及公用程式 DVD 光碟的內容會不定時地更新,但不另行通 知。如欲得知最新的訊息,請造訪華碩的網站 http://tw.asus.com。 4.2.
驅動及公用程式���������� DVD 光碟主選單 ����� 驅動程式選單顯示系統偵 測到連接裝置可使用的驅 動程式,請安裝適當的驅 動程式來使用該裝置 軟體選單顯示 本主機板支援 的應用程式與 其他軟體 製作磁片選單 包含有可建立 RAID/AHCI 驅動 程式磁片項目 手冊選單顯示本光碟 所附的使用手冊,點 選想要的項目來開啟 使用手冊的資料夾 點選連絡資 訊標籤頁顯 示與華碩連 絡的資訊 點選圖示顯 示 DVD/主 機板資訊 點選安裝各項 驅動程式 如果歡迎視窗並未自動出現,那麼您也可以到驅動程式及公用程式光碟 中的 BIN 檔案夾裡直接點選 ASSETUP.
4.2.2 取得軟體使用手冊 您可在驅動程式 DVD 光碟中找到軟體使用手冊,請依照以下步驟來取得您需要的 軟體使用手冊。 軟體使用手冊檔案為 P D F 格式,在您開啟使用手冊檔案前,請先安裝 ® ® Adobe Acrobat Reader 瀏覽軟體。 1. 首先��� ����� 點選 Manual(使用手冊) 標籤頁,由列表中選擇 A S U S Motherboard Utility Guide。 2. 進入 Manual(使用手冊) 資料 夾後,在您需要的使用手冊資料 夾用滑鼠左鍵點二下。 第四章 3.
4.3 軟體資訊 驅動程式及公用程式光碟中大部分的應用程式都會有安裝指導精靈來協助您一步一 步輕鬆地安裝軟體。您也可以由個別軟體所提供的線上說明檔或讀我檔取得安裝方式 及其他資訊的說明。 4.3.1 華碩 AI Suite 3 程式 透過友善的使用者介面,華碩 AI Suite 3 程式將所有的華碩獨家功能整合在一個軟 體套件中,可以同時操控並執行各項功能及應用程式。 安裝華碩�������������� AI Suite 3 程式 �� ® ® 當您安裝� �������������������� AI Suite 3 至�������� ��������� Windows 7 ��������� 或�������� Windows 8 ��������� 作業系統前,請確認 您有� ����������������������� Administrator���������� (主管理者)的帳號。 安裝華碩� ����������������� AI Suite 3 程式至電腦中 ������ Windows® 7 作業系統 ���� 1.
Windows® 8 作業系統 ���� 1. ������������������������� 放入公用程式光碟至光碟機中,並依照畫面的指示操作。 2. ��������������������� 從華碩主機板驅動及公用程式主選單裡,點選� Utilities������ (公用程式)標籤頁,然 後點選� �������������� AI Suite 3 程式。 ��� 3. ����������� 依照畫面上的指示操作。 若華碩主機板驅動及公用程式主選單並未自動顯示,請試著用以下方式操作: a. ��� 進入� Start Screen���� (開始),然後點選� Desktop���� (桌面)應用程式。 b.
AI Suite 3 主畫面 AI Suite 3 主畫面提供您輕鬆進入控制和了解電腦發生了什麼狀況 - 能提供您將效 能做最佳化設定,並同時確保系統的穩定性。 AI Suite 主畫面包含一個快速進入的主選單工具列,可以讓您快速開啟任何集中在 這裡的華碩公用程式。點選在主畫面上方 圖示便可以開啟此主選單工具列。 點選以開啟 AI Suite 3 選單工具列 AI Suite 3 主畫面僅供參考,請以您實際看到的畫面為準。 AI Suite 3 主選單工具列 Thermal Radar 2 USB 3.0 Boost EZ Update Network iControl 第四章 系統資訊 USB BIOS Flashback USB Charger+ Remote GO! • 本章節的畫面僅供參考,請以您實際看到的畫面為準。 • 請參考驅動程式 D V D 光碟中軟體手冊的說明,或是造訪華碩網站 http://tw.asus.
4.3.
Fan Control(風扇控制) 本程式提供了一個易於使用的預設風扇檔案,用於自動調整風扇轉速。並且可以提 供您自訂每個風扇的速度,將其儲存為一個風扇運轉使用的檔案。 點選螢幕以選擇您想 要自訂的風扇類型 點選以選擇風扇模式 點選以儲存自訂 的風扇檔案 點選以套用變更 點選以載入一個 設定檔案 拖億滑桿以設定在系統 關機後風扇加時時間 風扇加時功能僅能在輔助風扇上作用。 • 當 BIOS 程式中的 ErP 設定為啟動時,風扇加時��������������� (Fan Overtime)� 功 能則會關閉。 • 當系統關機後,輔助風扇(AS S T)會以待機電力運作,請勿連接過 多使用待機電力的裝置,否則可能會導致電力負荷過重。 第四章 4-8 第四章:軟體支援
自訂風扇設定值 您可以使用 Smart Mode(智慧模式)和 RPM (rotations per minute) Mode(RPM 模 式)來自訂風扇設定。 Smart Mode Smart Mode(智慧模式)提供您自訂風扇的轉速,以維持在一定的溫度下。有了這 項程式,您也可以指派三個關鍵元件並透過 Thermal Radar 2 做監控。 拖曳這些點可 以調整風扇的 轉速與溫度 點選此處可以檢 視風扇資訊 拖曳這些調 整桿可以調 整風扇的回 應時間 點選 圖示以選擇一 個感應器,然後拖曳 調整桿重量百分比 點選以套用變更 點選以回到 主畫面 點選可以在處理 器、風扇和輔助風 扇畫面之間切換 點選以不 做變更 RPM Mode 在 RPM ���������������������������� mode�������������������� (RPM 模式)下,當溫度低於 75℃ 時,提供您設定風扇速度。 ������������ 拖曳調整桿可 以增加或降低 風扇速度 點選可以在處理 器、風扇和輔助風 扇畫面之間切換 第四章 點選以回到 主畫面 華碩 GRYPHON Z87
華碩 DIGI+ Power Control 程式 華碩 DIGI+ Power Control 程式讓您可以輕鬆的調整��������� 處理器與 ���� VRM ������� 電壓與頻率,確 保性能與穩定性,同時提供最佳電源使用效能。 調整 CPU ��������� Power 點選後可以切 換不同畫面 點選以回到 主畫面 編號 點選以不做變更 點選以套用變更 功能 CPU Load-line Calibration 本項目用來調整電壓設定與控制系統溫度。當您將此項目的設定值 設定越高時,將可提高電壓值與超頻能力,但會增加 CPU 及 VRM 的溫度。 CPU Current Capability CPU Current Capability 代表 VRM 可提供更高超頻所需的總電源 量。此選項設定越高時,VRM 總電源傳輸範圍也越高。 CPU Power Phase Control CPU Power Phase Control 藉由在重系統負載情況下增加相式數 以得到更快更佳的散熱效能;在輕系統負載情況下減少相式數 以增加 VRM 效率。 * 當使用������������ ���
調整 DRAM Power 點選以回到主選單 編號 1 點選以不做變更 點選以套用變更 功能 DRAM Current Capability 設定 DRAM Current Capability 較高數值可提供 DRAM 控制器更高 超頻所需的總電源量。 2 DRAM Voltage Frequency 此項目可調整 DRAM 切換頻率使系統穩定或增加超頻範圍。 DRAM Power Phase Control 設定為 Extreme 以使用全相式模式提升系統效能,或是設定為 Optimized 以使用華碩最佳化相式調整模式增加 DRAM 電源效能。 第四章 3 華碩 GRYPHON Z87 主機板使用手冊 4-11
4.3.3 華碩 USB 3.0 Boost 程式 華碩 USB 3.0 Boost 程式可提升 USB 3.0 裝置的傳輸速度,並支援 USB 連接 SCSI 協議(UASP,USB Attached SCSI Protocol)。透過華碩 USB 3.0 Boost 程式,可輕 鬆提升您的 USB 3.0 裝置之傳輸速度。 執行華碩 USB 3.0 Boost 程式 若要執行 USB 3.0 Boost,請點選螢幕上方 工具列上的 USB 3.0 Boost。 圖示,然後點選 AI Suite 3 主選單 使用華碩 USB 3.0 Boost 程式 1. 請將 USB 3.0 裝置連接至 USB 3.0 連接埠。 2. 從 �� USB ��������������������� 3.0 Boost 視窗選擇一個 USB ������� 裝置。 3. ����� 若要啟動 �������� USB 裝置的 ������������ UASP 功能,請點選 UASP。若要還原為正常的傳輸率,請 點選 Normal。 USB 3.
4.3.4 USB BIOS Flashback 精靈 USB BIOS Flashback 精靈可以檢視並將最新版 BIOS 程式儲存至 USB 儲存裝置,配 合 ASUS USB BIOS Flashback 的硬體特色,讓您不需重新開機即可更新 BIOS 程式。 USB BIOS Flashback 主畫面 設定下載 BIOS 更新的排程 目前的 BIOS 資訊 點選以確認是 否有 BIOS 韌 體更新可下載 點選以取消下 載的排程設定 點選以套用下 載的排程設定 設定下載 BIOS 更新的排程 1. 請於 Download Setting(下載設定) 中勾選 Schedule (days)(排程),並選擇下 次進行下載更新的天數。 2. 請點選 Apply 套用變更,或是點選 Cancel 以取消變更。 下載最新版 BIOS 第四章 下載前請先確認已經將支援 USB BIOS Flashback 的 USB 儲存裝置連接至 電腦的 USB 連接埠。請參考 2.3.
請依照以下步驟下載最新版 BIOS: 1. 在 USB BIOS Flashback 主畫面中點選 Check for New BIOS Update 檢視是否 有 BIOS 韌體更新可下載。 請等待系統確認最新版的 BIOS 韌體版 本。 2.
4.3.5 USB Charger+ USB Charger+ 用來快速充電您的可攜式 USB 裝置,即使在電腦關機、睡眠狀態或 休眠狀態仍可進行充電。 在使用 USB Charger+ 之前,請先確認關閉在 BIOS 設定中 Advanced 模式 的 Advanced > APM > ErP Ready 的 Erp Ready 選項。 執行 USB Charger+ 若要執行 USB Charger+,請點選螢幕上方 工具列上的 USB Charger+。 圖示,然後點選 AI Suite 3 主選單 USB Charger+ 主畫面 點選來偵測 已連接的 USB 裝置 點選以快速 充電您的 USB 裝置 顯示連接的 USB 裝置正處 於充電中模式 點選以停止 充電您的 USB 裝置 點選以套 用設定 點選您想要在系統關機時進 行充電的 USB 裝置類型 點選以取消 套用設定 請確認將您的 USB 裝置連接至支援本程式之 USB 連接埠。請參考 2.3.
4.3.
4.3.
4.3.
查看 SPD 資訊 從系統資訊主畫面,點選 SPD 標籤頁來查看記憶體的相關資訊。 4.3.
® ® ® A.
第五章 5.1 RAID 功能設定 本主機板����� 支援以下 SATA ���������� RAID 解決方案� ����� 。 ® • Intel Rapid Storage Technology:支援 RAID 0、RAID 1、RAID 10 和 RAID 5。 若您想要使用設置有 RAID 磁碟陣列的硬碟機來啟動系統������� ,������ 請在安裝作業 系統到選定的硬碟之前,先將公用程式 DVD 光碟內的 RAID 驅動程式檔 案複製至磁碟片中。請參考 4.5 建立一張搭載有 RAID 驅動程式的磁片 一節的說明。 5.1.
5.1.2 安裝 Serial ATA(SATA)硬碟機 本主機板支援 Serial ATA 硬碟機。為了最佳的效能表現,當您要建立陣列模式設 定時,請盡可能採用具備相同型號與容量的硬碟機。 請依照以下安裝方式來建構 SATA RAID 磁碟陣列� : 第五章 1. 將硬碟安裝至硬碟槽中。 2. 安裝硬碟連接排線,將欲建構磁碟陣列的硬碟連接至主機板。 3. 將 SATA 電源線連接到每一部硬碟機。 5.1.3 在 BIOS 程式中設定 RAID 在您開始建立陣列之前,您必須先在 BIOS 程式設定中設定對應的 RAID 選項。請 依照下列步驟進行操作︰ 1. 在開機之後系統仍在記憶體的開機自我測試(Power-On Self Test,POST)時, 按下 按鍵進入 BIOS 設定程式。 2. 進入主選單(Main)後,選擇 Advanced > SATA Configuration 選項,然後按 。 3. 將 SATA Mode 選項設定為 [RAID Mode]。 4.
® 5.1.4 進入 Intel Rapid Storage Technology Option ROM 公用程式 ® 請依照下列步驟來進入 Intel Rapid Storage Technology Option ROM 公用程式: 1. 啟動您的電腦。 第五章 2. 當系統執行開機自我檢測程序(POST)時,按下 按鍵來進入公用程式主 選單。 Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070 Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. [ MAIN 1. Create RAID Volume 2. Delete RAID Volume 3. Reset Disks to Non-RAID RAID Volumes: None defined.
建立 RAID 設定 請依照下列步驟建立 RAID 設定: 1. 選擇 1. Create RAID Volume 然後按下 按鍵,會出現如下圖所示的視窗畫 面。 第五章 Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070 Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. [ CREATE VOLUME MENU ] Name: Volume0 RAID Level: Disks: Strip Size: Capacity: Sync: Create volume [ HELP ] Enter a unique volume name that has no special characters and is 16 characters or less. [↑↓]-Select [ESC]-Exit [ENTER]-Select Menu 2. 為您的 RAID 磁區鍵入一個名稱,然後按下 按鍵。 3.
5. 請使用向上、向下方向鍵來選擇硬碟裝置,確認後請按下 按鍵來進行選 擇。接著被選定的硬碟裝置旁便會出現一個小三角形圖示。當要進行陣列設定的 硬碟裝置選擇完畢後,請按下 按鍵。 第五章 6. 使用向上、向下方向鍵來選擇 RAID 磁碟陣列(RAID 0、RAID 10、RAID 5)要 分割的容量,然後按下 按鍵。分割的數值可由 4KB 遞增至 128KB,資料 分割的數值應該以硬碟使用的目的來決定。下列為建議選項: RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB 若此系統欲作為伺服器使用,建議您選擇較低的磁區大小;若此系統欲 作為多媒體電腦用來執行影音的編輯製作,建議您選擇較高的磁區大小 來獲得最佳的效能。 7. 輸入您所要的陣列容量,接著按下 按鍵。本項目預設值是採用最高可容 許的磁碟容量。 8.
刪除 RAID 陣列 當您要刪除 RAID 設定時請小心,儲存在硬碟中的資料會被全部刪除。 第五章 請依照以下步驟刪除 RAID 陣列: 1. 選擇 2. Delete RAID Volume 然後按下 按鍵,會出現如下圖所示的視窗畫 面。 Name Volume0 [ DELETE VOLUME MENU ] Level Drives RAID0(Stripe) 2 Capacity 298.0GB Status Normal Bootable Yes [ HELP ] Deleting a volume will reset the disks to non-RAID. WARNING: ALL DISK DATA WILL BE DELETED. (This does not apply to Recovery volumes) [↑↓]-Select [ESC]-Previous Menu [DEL]-Delete Volume 2.
5.2 建立一張搭載有 RAID 驅動程式的磁片 ® 當您欲在擁有 RAID 設定的硬碟中安裝 Windows 作業系統時,您需要準備一張搭 載有 RAID 驅動程式的磁片。 第五章 本主機板沒有軟碟機插槽,請使用 USB 軟碟機來建立 SATA RAID 驅動 程式的磁片。 5.2.1 在不進入作業系統狀態下建立 RAID 驅動程式磁片 請依照下列步驟在不進入作業系統狀態下建立 RAID/SATA 驅動程式磁片: 1. 開啟您電腦的電源。 2. 當進行 POST 開機自我檢測時按下 鍵進入 BIOS 程式設定。 3. 將光碟機設定為主要開機裝置。 4. 將驅動程式與公用程式光碟放入光碟機中。 5. 儲存變更並退出 BIOS 程式設定。 6. 當選單出現時,點選 製作驅動程式磁片 標籤頁,按下 <1> 來建立一張 RAID 驅 動程式磁片。 7. 將已格式化的磁片放入 USB 軟碟機中,並按下 鍵。 8. 依照螢幕的指示完成驅動程式磁片的建立。 ® 5.2.
® 5.2.3 在安裝 Windows 作業系統時安裝 RAID 驅動程式 ® 請依照下列步驟在 Windows 7 安裝 RAID 驅動程式: 1. 當安裝作業系統時,選擇 Load Driver。 第五章 2. 將搭載有 RAID 驅動程式的磁碟片/USB 隨身碟置入軟碟機/USB 連接埠,並點選 Browse。 3. 請選擇您的裝置後,選擇 Drivers > RAID,並選擇 RAID 驅動程式檔案再按下 OK。 4.
附錄 ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.
Bluetooth Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
華碩的連絡資訊 華碩電腦公司 ASUSTeK COMPUTER INC.(亞 太地區) 市場訊息 地址 電話 傳真 電子郵件 全球資訊網 :台灣臺北市北投區立德路15號 :886-2-2894-3447 :886-2-2890-7798 :info@asus.com.tw :http://tw.asus.com/ 技術支援 免費服務電話 線上支援 :0800-093-456 :http://support.asus.com/ ASUS COMPUTER INTERNATIONAL(美國) 市場訊息 地址 電話 傳真 全球資訊網 :800 Corporate Way, Fremont, CA 94539, USA :+1-812-282-3777 :+1-510-608-4555 :http://usa.asus.com/ 技術支援 電話 傳真 線上支援 :+1-812-282-2787 :+1-812-284-0883 :http://support.asus.
800 Corporate Way, Fremont, CA 94539. Asus Computer International Date : Signature : Representative Person’s Name : Apr. 12, 2013 Steve Chang / President This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.