User Guide

ManualsBrandsASUS ManualsOtherZ90R

• HDD Module Installation & Replacement

• Memory Installation & Replacement

• CPU Module Installation & Replacement

• MINIPCI Wireless Lan Module Installation & Replacement

• Optical Drive Module Installation & Replacement

Installation & Replacement

Follow the individual procedures to perform the notebook’s

installation and replacement of various major components.

Z90R Series Notebook is a product balanced, novelty and mobility in an elegantly

designed housing. The key installable and replaceable items include the Memory,

CPU module, MINIPCI Wireless Lan module, Optical drive module and HDD module.

Be sure to follow the safety instructions described from the start to safeguard the

notebook against any potential damages.

This chapter includes the following items:

INSTALLATION & REPLACEMENT

• Precautions

• Appropriate Tools

Summary of content (8 pages)

PAGE 1
I N S T A L L A T I O N & R E P L A C E M E N T Installation & Replacement Follow the individual procedures to perform the notebook’s installation and replacement of various major components. Z90R Series Notebook is a product balanced, novelty and mobility in an elegantly designed housing. The key installable and replaceable items include the Memory, CPU module, MINIPCI Wireless Lan module, Optical drive module and HDD module.
PAGE 2
I N S T A L L A T I O N T O O L S & R E P L A C E M E N T Appropriate Tools The illustrations below show the appropriate tools that should be used for the notebook’s service and repair. C R O S S S C R E W - Phillips-head Screwdriver Use a Phillips-head screwdriver to fasten/remove the K- or B-typed screws.
PAGE 3
I N S T A L L A T I O N M O L E X C P U S O C K E T & R E P L A C E M E N T Molex CPU Socket Tool Use Molex CPU Socket tool to lock/unlock the Molex socket of CPU. T O O L Width: 4.00mm I N S E R T I O N A N D E X T R A C T I O N T O O L Depth: 0.45+/-0.1mm The angle of tip: approximate 9 degree Insertion and extraction tool for FPC connector Use insertion and extraction tool for FPC connector to handle locking and unlocking of FPC connectors.
PAGE 4
I N S T A L L A T I O N C A U T I O N S & R E P L A C E M E N T Precautions Before you perform any service and/or repair on the notebook, please follow the steps below first. 1. Be sure that the notebook is powered down. 2. Disconnect the AC plug from the left side of the notebook (on the illustration below). 3. Turn the notebook over. Unlock and hold the 2 latches, and remove the battery . 4. Remove all rings, watches and any other metal objects from your hands. 5.
PAGE 5
I N S T A L L A T I O N M E M O R Y & R E P L A C E M E N T Memory Upgrade Two SODIMM socket supported for expansion up to 1024MB total (512MB DDR SO-DIMM x2). First, remove AC-power and battery. Upgrading memory 1. Find the memory socket under the Keyboard (Fig1) and bottom case (Fig2) as following photos and upgrade memory by the process of item2 and item3. Fig1 Fig2 2. If there is an existing memory, remove it by opening the latches (no.
PAGE 6
I N S T A L L A T I O N & R E P L A C E M E N T Pin 1 2. Put the CPU thermal pad on the CPU diode. 3. Place the CPU Heat sink module onto it. 4. Secure 4 screws(M2*6L) in sequence. 5. Connect the FAN cable and install the CPU fan in the proper location. / Finally, Secure 2 screws(M2*6L) here . 6. Secure 1 screw here to fix cover.
PAGE 7
I N S T A L L A T I O N M I N I P C I W I R E L E S S L A N M O D U L E I N S T A L L M O D U L E I N S T A L L R E P L A C E M E N T MINIPCI Wireless Lan Module Installation & Replacement The illustrations below show how to assemble and install the MINIPCI Wireless Lan Module into the notebook. 1. 2. 3. 4. O p t i c a l & Take MINIPCI Wireless Lan Module. Connect the black main antenna cables to main pole and connect white auxiliary antenna cable to auxiliary pole.
PAGE 8
I N S T A L L A T I O N H D D / B A T T E R Y & R E P L A C E M E N T HDD Module Installation & Replacement The illustrations below show how to install the HDD module and into the notebook. I N S T A L L Install HDD Module H D D M O D U L E The illustrations below show how to install HDD module. I N S T A L L 1. Slide the HDD to connect to its connector. 2. Secure 3 screws (M2.5*8L)here to fix the HDD.