E-Manual
13
ZenFlash Camera Software Manual
5. The Target and Scene control bar will both be displayed on the
camera home screen under Night Backlight Mode. You can adjust
the brightness for both the target and the scene. The smaller the
number for the scene control bar the darker the scene, the bigger
the number, the brighter the scene will be.
6. In Night Backlight Mode, dierent scene values will have dierent
target values. The values are shown below:
- When Scene value 50 is selected, the target values are 0.5, 1.0,
1.5
- When Scene value 100 is selected, the target values are 0.5,
1.0, 1.5, 2.0, 2.5
- When Scene value 200 is selected, the target values are 0.5,
1.0, 1.5, 2.0, 2.5, 3.0, 3.5
- When Scene value 400 is selected, the target values are 0.5,
1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0
7. Manual Flash Mode adjustments will be saved and loaded the
next time the ZenFlash Camera app is launched.
8. When the ZenFlash is idle for a period of time, the app will display
a message “Suggest unplug your ZenFlash after use”.