Operation Manual
Table Of Contents
- 1 Basics
- 2 There’s no place like Home
- 3 Work hard, play harder
- 4 Keeping in touch
- 5 Fun and entertainment
- 6 Your precious moments
- 7 Staying connected
- 8 Travel and Maps
- 9 ZenLink
- 10 Zen Everywhere
- 11 Maintain your Zen
- Appendix
- Index
138
Chapter 10: Zen Everywhere
Customizing Power Saver
Set the brightness level and enable Ultra-saving mode when your Zen device’s battery level is
getting low.
1. From Power Saver, tick Customized mode, then tap .
2. Tap Turn on Ultra-saving mode automatically then select 5% or 15% to enable Ultra-saving
mode when your Zen device’s battery percentage is below 5% or 15%, or select Never to not
allow Ultra-saving mode to be enabled automatically.
3. Tap Reduce brightness then select the percentage that the screen brightness level is reduced
by.
4. If you want to enable the auto-disconnection of your network, tick IM and other apps using
push notification. Your Zen device will automatically disconnect from your network when it is
idle, and will resume the network connection when you wake up your Zen device.