Operation Manual

151
• Defaultlanguagestatus:Hereyourdevicedisplaysthecurrentstatusofyourdefaultlanguage
(e.g. “fully supported”). The default language is the language selected in your preferred Text-to-
speech engine.
Touch & hold delay
This setting allows you to adjust the amount of time required for your device to notice that you’re
touching an object on the screen. Users with limited dexterity might prefer to use a longer touch
and hold delay.
To adjust your touch and hold delay, follow these steps:
1. Go to Settings > Accessibility > Touch and hold delay.
2. Select Short, Medium, or Long.
Color inversion
This information applies only to devices running Android 5.0 and higher.
Color inversion exchanges color values. For example, black text on a white screen becomes white
text on a black screen.
To enable or disable color inversion, follow these steps:
1. Go to Settings > Accessibility.
2. Select Color inversion.
Color inversion is currently an experimental feature, so it might not work correctly everywhere on
your device.
Color correction
This information applies only to devices running Android 5.0 and higher.
The color correction setting enables your device to compensate for color blindness.
To enable or disable color correction, follow these steps:
1. Go to Settings > Accessibility > Color correction.
2. Set the switch to the on or off position.
3. To change the color correction mode, select Correction mode, then choose one of the following
options:
 • Deuteranomaly(red-green)
 • Protanomaly(red-green)
 • Tritanomaly(blue-yellow)
Color correction is currently an experimental feature, so it might not work correctly everywhere on
your device.