E3992 Eee Stick GMC-1 User manual
Package contents English Check your Eee Stick package for the following items: Eee Stick contollers USB dongle Quick start guide Support CD If any of the above items is damaged or missing, contact your retailer immediately.
Knowing your Eee Stick English Front view Status LED Control stick Control keypad Power buttons Control buttons Strap lock Wrist strap Top view MODE button Control buttons Control button
Using your Eee Stick English Installing the batteries 1. 2. 3. Remove the battery cover. Install the batteries into the slots in the correct orientation. Slide back the battery cover. + + - - + + Removing or replacing the batteries -- + - 3. Remove the battery cover. Pull the edge of the battery in the right battery slot until it is released. Follow step 1 and 2 to remove the battery in the left battery slot. + 1. 2.
To prevent the Eee Stick from dropping while you are playing games, properly put on the wrist straps to both of your hands, and then tighten the straps using the strap locks. English Wearing the wrist straps Strap locks Turning on your Eee Stick 1. 2. Connect the USB dongle to your computer. Hold the power buttons on both the controllers by about 5 seconds until the LEDs light up. Ensure that only the LED 1 on both controllers light up. The LED on the USB dongle should light up, too.
English Installing the driver 1. 2. Place the support CD to the optical drive. Click Install GMC driver and applications, and then follow the onscreen instructions to complete the installation. Launching the GMC After the driver installation is completed, the GMC icon appears on the Windows® desktop. Double click the icon to activate the GMC application.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.