E7631 MeMO Pad User Manual ASUS is devoted to creating environment-friendly products and packaging to safeguard consumers’ health while minimizing the impact on the environment. The reduction of the number of the manual pages complies with the reduction of carbon emission. For the detailed user manual and related information, refer to the user manual included in the MeMO Pad or visit the ASUS Support Site at http://support.asus.com/. E7631_ME172V_User_Manual.
Charging Your Batteries Ensure to fully charge your battery pack before using your MeMO Pad in battery mode for extended periods. Remember that the power adapter charges the battery pack as long as it is plugged into an AC power source. Be aware that it takes much longer to charge the battery pack when the MeMO Pad is in use. IMPORTANT! Do not leave the MeMO Pad connected to the power supply once it is fully charged.
Package contents MeMO Pad Micro USB cable Power adapter Warranty card User manual OTG (On-the-Go) USB cable (optional) NOTES: • If any of the items is damaged or missing, contact your retailer. • The bundled power adapter varies with country or region. ASUS MeMO Pad E7631_ME172V_User_Manual.
Your MeMO Pad Touch screen panel The touch screen panel allows you to operate your MeMO Pad using touch gestures or a stylus pen. Front camera This built-in 1-megapixel camera allows you to take pictures or record videos using your MeMO Pad. E7631_ME172V_User_Manual.
Micro USB 2.0 port Use the micro USB (Universal Serial Bus) 2.0 to charge the battery pack or supply power to your MeMO Pad. This port also allows you to transfer data from your computer to your MeMO Pad and vice versa. NOTE: When you connect your MeMO Pad to the USB port on your computer, your MeMO Pad will be charged only when it is in sleep mode (screen off) or powered off.
Manual reset hole If the system becomes unresponsive, insert a straightened paper clip into the hole to force-restart your MeMO Pad. IMPORTANT! Forcing the system to restart may result to data loss. We strongly recommend that you back up your data regularly. Audio speaker Your MeMO Pad is equipped with a built-in high quality speaker. Audio features are software controlled.
Power button The power button allows you to do the following: • Press the power button for about two (2) seconds to turn your MeMO Pad on. • Press the power button to put your MeMO Pad to sleep or hibernate and wake it up from sleep or hibernate mode. • Press and hold the power button for about six (6) seconds to force shut down your MeMO Pad when it becomes unresponsive. • Press the power button for about two (2) seconds and when prompted, tap OK to shut down your MeMO Pad.
Charging your MeMO Pad To charge your MeMO Pad: Connect the micro USB cable to the power adapter. Plug the micro USB connector into your MeMO Pad. Plug the power adapter into a grounded socket outlet. E7631_ME172V_User_Manual.
IMPORTANT! • Use only the bundled power adapter and micro USB cable to charge your MeMO Pad. Using a different power adapter may damage your MeMO Pad. • Peel the protective film off from the power adapter and micro USB cable before charging the MeMO Pad to prevent risk or injury. • Ensure that you plug the power adapter to the correct socket outlet with the correct input rating. The output voltage of this adapter is DC5V, 2A.
Appendices Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules.
• Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. The antenna(s) used for this transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves.
Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The IC ID for this device is 3568A-K0W.
Canada, avis d’Industrie Canada (IC) Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement. L’identifiant IC de cet appareil est 3568A-K0W.
Pour des informations supplémentaires concernant l’exposition aux RF au Canada rendez-vous sur : http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html EC Declaration of Conformity This product is compliant with the regulations of the R&TTE Directive 1999/5/EC. The Declaration of Conformity can be downloaded from http://support.asus.com. Limitation of Liability Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY. Prevention of Hearing Loss To prevent possible hearing damage, do not listen at high volume levels for long periods.
CE Mark Warning CE marking for devices without wireless LAN/ Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”. The highest CE SAR value for the device is 0.356 W/Kg. RF Exposure information (SAR) - CE This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
For next-to-body operation, this device has been tested and meets the ICNRP exposure guidelines and the European Standard EN 62311 and EN 62209-2. SAR is measured with the device directly contacted to the body while transmitting at the highest certified output power level in all frequency bands of the mobile device. Power Safety Requirement Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.
Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw the MeMO Pad in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
Copyright Information No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or tranPadd into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS and MeMO Pad logo are trademarks of ASUSTek Computer Inc. Information in this document is subject to change without notice.
E7631_ME172V_User_Manual.